Programmable Logic ControllerSmart I/O Pnet
PIB: 10310000542
Installation GuideGPL-DV4C/DC4C
10310000542
Phau ntawv qhia kev teeb tsa no muab cov ntaub ntawv ua haujlwm yooj yim lossis PLC tswj. Thov ua tib zoo nyeem cov ntaub ntawv no thiab phau ntawv qhia ua ntej siv cov khoom. Tshwj xeeb tshaj yog nyeem ceev faj ces tuav cov khoom kom zoo.
Kev Tiv Thaiv Kev Nyab Xeeb
■ Lub ntsiab lus ceeb toom thiab ceeb toom
CEEB TOOM qhia tias muaj xwm txheej txaus ntshai uas, yog tias tsis zam, tuaj yeem ua rau tuag lossis raug mob hnyav
CAUTION qhia tias muaj xwm txheej txaus ntshai uas, yog tias tsis zam, yuav ua rau muaj kev raug mob me me lossis nruab nrab. Nws kuj tseem siv tau los ceeb toom tawm tsam kev coj tsis zoo
CEEB TOOM
① Tsis txhob hu rau lub davhlau ya nyob twg thaum lub hwj chim siv.
② Nco ntsoov tias tsis muaj cov khoom hlau txawv teb chaws.
③ Tsis txhob siv lub roj teeb (them, disassemble, ntaus, luv, soldering).
CEEB TOOM
① Nco ntsoov xyuas qhov ntsuas voltage thiab davhlau ya nyob twg kev npaj ua ntej xaim
② Thaum xaim, zawm cov ntsia hlau ntawm lub davhlau ya nyob twg thaiv nrog rau qhov tshwj xeeb torque ntau
③ Tsis txhob nruab cov khoom hluav taws xob nyob ib puag ncig
④ Tsis txhob siv PLC nyob rau hauv ib puag ncig ntawm kev co ncaj qha
⑤ Tsuas yog cov neeg ua haujlwm pabcuam kws tshaj lij, tsis txhob cuam tshuam lossis kho lossis hloov cov khoom
⑥ Siv PLC nyob rau hauv ib puag ncig uas ua tau raws li cov lus qhia dav dav hauv cov ntaub ntawv no.
⑦ Nco ntsoov tias kev thauj khoom sab nraud tsis pub dhau qhov ntsuas ntawm cov zis module.
⑧ Thaum pov tseg PLC thiab roj teeb, kho nws li kev lag luam pov tseg.
⑨ I/O teeb liab lossis kab sib txuas lus yuav tsum tau xaim tsawg kawg 100 hli deb ntawm lub highvoltage cable los yog fais fab kab.
Kev ua haujlwm ib puag ncig
■ Txhawm rau nruab, ua raws li cov xwm txheej hauv qab no.
| Tsis muaj | Yam khoom | Specification | Txuj | |||
| 1 | Ambient kub | 0 ~ 55 ℃ | – | |||
| 2 | Cia temp. | -25 ~ 70 ℃ | – | |||
| 3 | Ambient humidity | 5 ~ 95% RH, tsis-condensing | – | |||
| 4 | Cia cov av noo | 5 ~ 95% RH, tsis-condensing | – | |||
| 5 | Vibration Resistance | Qee zaus vibration | – | – | ||
| Ntau zaus | Kev nrawm | TS EN 61131-2 | ||||
| 5≤f <8.4㎐ | – | 3.5 hli | 10 zaug hauv txhua qhov kev taw qhia rau X, Y, Z | |||
| 8.4≤f≤150㎐ | 9.8㎨ (1g) | – | ||||
| Kev vibration tsis tu ncua | ||||||
| Ntau zaus | Ntau zaus | Ntau zaus | ||||
| 5≤f <8.4㎐ | – | 1.75 hli | ||||
| 8.4≤f≤150㎐ | 4.9㎨ (0.5g) | – | ||||
Accessories thiab Cable Specifications
■ Kos Profibus Connector muaj nyob rau hauv lub thawv
- Siv: Profibus Kev Sib Txuas Txuas Txuas
- Yam khoom: GPL-CON
■ Thaum siv Pnet kev sib txuas lus, shielded twisted khub cable yuav tsum tau siv nrog kev txiav txim siab ntawm kev sib txuas lus nyob deb thiab ceev.
- Chaw tsim tshuaj paus: Belden los yog tus tsim cov khoom sib npaug hauv qab no
- Cable Specification
| Kev faib tawm | Kev piav qhia | |
| AWG | 22 |  |
| Hom | BC (Bare Copper) | |
| Rwb thaiv tsev | PE (Polyethylene) | |
| Txoj kab uas hla (inch) | 0.035 | |
| Ntaub thaiv npog | Aluminium Ntawv Nyiaj-Polyester, Daim kab xev / Braid Shield | |
| Capacifance (pF / ft) | 8.5 | |
| Yam ntxwv impedance (Ω) | 150 Ω | |
Qhov Loj (mm)
■ Qhov no yog pem hauv ntej ntawm cov khoom. Xa mus rau txhua lub npe thaum ua haujlwm ntawm qhov system. Yog xav paub ntxiv, saib mus rau tus neeg siv phau ntawv.
■ LED Paub meej
| Lub npe | Kev piav qhia |
| Khiav | Qhia cov xwm txheej ntawm lub zog |
| RDY | Qhia txog kev sib txuas lus ntawm Comm. Module |
| ERR | Qhia qhov txawv txav ntawm comm.. module |
Analog Performance Specification
■ Qhov no yog analog kev ua tau zoo specifications ntawm cov khoom. Xa mus rau txhua lub npe thaum tsav lub system. Yog xav paub ntxiv, saib mus rau cov neeg siv phau ntawv.
| Yam khoom | GPL-DV4C (Voltage tso zis) | GPL-DC4C (Cov zis tam sim no) | ||
| Analog tso zis channel | 4 channel | |||
| Cov lus qhia tawm tswv yim | 1 ~ 5V | 0-4000 : kuv | 4 ~ 20mA | 0-8000 : kuv |
| 0 ~ 5V | ||||
| 0 ~ 10V | 0-8000 : kuv | 0 ~ 20mA | ||
| -10 ~ 10V | -8000-8000 | |||
| Kev daws teeb meem | 1 ~ 5V | 1.250mV | 4 ~ 20mA | 2.5 µA |
| 0 ~ 5V | ||||
| 0 ~ 10V | 0 ~ 20mA | |||
| -10 ~ 10V | ||||
| Accuacy (Ambient temp.) | ± 0.3% lossis tsawg dua | ± 0.4% lossis tsawg dua | ||
| Hloov siab ceev | 10ms/module + Lub sijhawm hloov tshiab | |||
| Absolute max. nkag | ± 15V | ± 25mA | ||
| Rwb thaiv tsev txoj kev | Photo-coupler rwb thaiv tsev ntawm lub davhlau ya nyob twg input thiab PLC lub zog (tsis muaj rwb thaiv tsev ntawm cov channel) | |||
| Terminal txuas | 38-point chaw nres tsheb | |||
| Internal siv tam sim no | DC24V, 210mA | DC24V, 240mA | ||
| Qhov hnyav | 314 g | 322 g | ||
Terminal Block Layout rau I / O Wiring
■ Qhov no yog lub davhlau ya nyob twg thaiv layout rau I/O thaiv. Xa mus rau txhua lub npe thaum tsav lub system.
Yog xav paub ntxiv, saib mus rau cov neeg siv phau ntawv.
Kev xaim
■ Cov qauv sib txuas thiab cov txheej txheem txuas
- Cov kab nkag: kab ntsuab txuas nrog A1, kab liab txuas nrog B1
- Cov kab tso zis: kab ntsuab txuas nrog A2, kab liab txuas nrog B2
- Txuas ntaub thaiv npog rau clamp ntawm daim ntaub thaiv
- Nyob rau hauv rooj plaub ntawm kev txhim kho lub connector ntawm lub davhlau ya nyob twg, nruab lub cable ntawm A1, B1
- Yog xav paub ntxiv txog kev xaim, xa mus rau cov neeg siv phau ntawv.
Warranty
■ Lub sijhawm lav yog 36 lub hlis txij li hnub tsim khoom.
■ Kev kuaj thawj zaug ntawm kev ua txhaum yuav tsum yog tus neeg siv. Txawm li cas los xij, thaum thov, LS
ELECTRIC lossis nws cov neeg sawv cev tuaj yeem ua txoj haujlwm no rau tus nqi. Yog qhov ua txhaum
pom tias yog lub luag haujlwm ntawm LS ELECTRIC, qhov kev pabcuam no yuav tsis pub dawb.
■ Tsis suav nrog kev lav
- Hloov cov khoom siv thiab lub neej txwv (xws li relays, fuses, capacitors, roj teeb, LCDs, thiab lwm yam)
- Kev ua tsis tiav lossis kev puas tsuaj tshwm sim los ntawm cov xwm txheej tsis raug lossis tuav tawm sab nraud uas tau teev tseg hauv cov neeg siv phau ntawv
- Kev ua tsis tiav los ntawm cov khoom siv sab nraud tsis cuam tshuam nrog cov khoom
- Kev ua tsis tiav los ntawm kev hloov kho yam tsis muaj LS ELECTRIC qhov kev pom zoo
- Kev siv cov khoom hauv qhov tsis xav tau
- Kev ua tsis tiav uas tsis tuaj yeem kwv yees / daws tau los ntawm cov cuab yeej tshawb fawb tam sim no thaum lub sijhawm tsim khoom
- Kev ua tsis tiav vim muaj lwm yam xws li hluav taws kub, txawv txav voltage, los yog kev puas tsuaj ntuj tsim
- Lwm qhov xwm txheej uas LS ELECTRIC tsis muaj lub luag haujlwm
■ Yog xav paub ntxiv txog kev lav phib xaub, thov xa mus rau tus neeg siv phau ntawv.
■ Cov ntsiab lus ntawm daim ntawv qhia kev teeb tsa yuav raug hloov pauv yam tsis tau ceeb toom rau kev txhim kho cov khoom lag luam.
LS ELECTRIC CO., LTD. www.ls-electric.com 10310000542 V4.5 (2024.6)
• E-mail: yog automation@ls-electric.com
| • Headquarter/Seoul Office • LS ELECTRIC Shanghai Chaw Haujlwm (Tuam Tshoj) • LS ELECTRIC (Wuxi) Co., Ltd. (Wuxi, Suav teb) • LS-ELECTRIC Vietnam Co., Ltd. (Hanoi, Vietnam) • LS ELECTRIC Middle East FZE (Dubai, UAE) • LS ELECTRIC Europe BV (Hoofddorf, Netherlands) • LS ELECTRIC Japan Co., Ltd. (Tokyo, Nyiv) • LS ELECTRIC America Inc. (Chicago, USA) |
Xovtooj: 82-2-2034-4033,4888,4703 Xovtooj: 86-21-5237-9977 Xovtooj: 86-510-6851-6666 Xovtooj: 84-93-631-4099 Xovtooj: 971-4-886-5360 Xovtooj: 31-20-654-1424 Xovtooj: 81-3-6268-8241 Xov tooj: 1-800-891-2941 Ib |
• Hoobkas: 56, Samseong 4-gil, Mokcheon-eup, Dongnam-gu, Cheonan-si, Chungcheongnamdo, 31226, Kauslim
Cov ntaub ntawv / Cov ntaub ntawv
 |
LS GPL-DV4C Programmable Logic Controller [ua pdf] Daim ntawv qhia kev teeb tsa GPL-DV4C Programmable Logic Controller, GPL-DV4C, Programmable Logic Controller, Logic Controller, Tus Tswj |