Introduction
This guide is for the Ender-3 Pro Series of 3D printers. Please select the correct input voltage to match your local mains (230V or 115V). Due to software/hardware upgrades and model differences, new revisions may not be listed in this guide. Please plug the power cord into a three-hole power jack. Detailed instructions for use are available in the TF card.
Notes
- Do not use the Printer in any way other than described herein to avoid personal injury or property damage.
- Do not place the Printer near flammables, explosives or heat sources. It is best to place it in a well-ventilated, low-dust environment.
- Do not expose the Printer to violent vibration or any unstable environment. This will cause poor print quality.
- The filaments recommended by the manufacturer are preferred to avoid clogging in the hot end and/or Printer damage.
- Do not use any other power cable than the one supplied. Use a grounded three-prong power outlet.
- Do not touch the nozzle or hot bed during printing. Keep hands away from the machine while in use to avoid burns or personal injury.
- Do not wear gloves or loose clothing when operating the Printer. These loose articles can become caught in moving parts and cause personal injury or Printer damage.
- Clean off filament from the nozzle tip with the provided pliers before the nozzle cools. Do not touch the nozzle directly. This can cause personal injury.
- Clean the Printer frequently. With the machine powered off, clean the printer body with a dry cloth to remove dust, adhered printing materials and foreign objects on guide rails. Use glass cleaner or isopropyl Alcohol to clean the print surface before every print for consistent results.
- Children under 10 years of age should not use the Printer without supervision.
Preface
Thank you for choosing Creality products. For the best experience, please read the instructions before operating the Printer. The Creality 3D team is always ready to provide assistance. Please contact them via the phone number or e-mail address provided at the end when you encounter any problem with the Printer.
For a better experience in using the product, you may learn how to use the Printer in the following ways:
- View the accompanied instructions and videos in the TF card.
- Visit the official website www.creality3d.cn. You will find relevant software/hardware information, contact details, and operation and maintenance instructions on the website.
Key Components
- TF Slot and USB Port
- Control Box
- Print Surface
- Control Knob
- Display Screen
- Nozzle Assembly
- Spool Holder
- Extruder (E) Stepper
- Power
- Y Limit Switch
- Y Stepper
- Coupling
- Z Stepper
- Z Limit Switch
- X Limit Switch
- X Stepper
Screen Information Displayed
The screen displays Print Speed, Model (e.g., Ender-3 Pro), coordinates (X, Y, Z), percentage of print progress, and website information.
Operations
- Prepare: Access options like Auto Home, Preheat PLA/ABS, Cooldown, and Move Axis.
- Control: Adjust Temperature, Restore Failsafe settings.
- Printing: Control Print Speed, Nozzle temperature, Bed temperature, Fan Speed, and Flow.
- Tune: Pause or Stop Print.
Loading Filament
Method 1 & 2: Involves preheating the nozzle and then feeding the filament through the extruder. Ensure the filament is correctly inserted until it comes out of the nozzle.
Tip: To replace filament, cut the filament near the extruder, slowly feed the new filament, preheat the nozzle, withdraw the filament quickly, and feed the new filament.
Bed Levelling
- Prepare > Auto Home to move the nozzle to the platform's left/front.
- Prepare > Disable Steppers to release the motor.
- Move the nozzle to the front/left leveling screw and adjust the platform height using the knob underneath. Use an A4 paper to ensure the nozzle lightly scratches the paper.
- Complete adjustment on all 4 corners.
- Repeat steps 1-2 if necessary.
Software Installation
Install Creality Slicer 1.2.3 by double-clicking the installer. Follow the Configuration Wizard, select your machine, language, and complete the installation.
First Printing
- Slicing: Open Creality Slicer, load your model file, slice it, and save the resulting gcode file to the TF card.
- Printing: Insert the TF card into the printer, select 'Print from TF card', and choose the file to be printed.
Troubleshooting
The guide provides a flowchart for troubleshooting common issues, including SD card problems, slicing errors, connection issues, and filament feeding problems. Solutions involve checking cables, software settings, and filament path.
After-Sales Service
Service: The printer has a 7-day return, 15-day replacement, one-year warranty, and lifetime maintenance policy.
Replacement Requirement: Product appearance must be intact, all parts and tools complete, and a valid purchase invoice and warranty are required.
Warranty Coverage: Specific accessories are not covered unless damaged during transportation. The nozzle assembly has a 3-month warranty, and the motherboard, LCD display, power supply, and hot bed have a 12-month warranty. Unauthorized modifications, incorrect installation, improper use, or use of non-branded components may void the warranty.
Statement: Creality 3D Technology prohibits the use of their printers for printing products or equipment that violate national or regional legislation.
