Vector Hatch Mounting
Jagora mai sauri
CTO Vector Hatch Sensor
MATAKI NA 1
Fara da rufaffiyar ƙyanƙyashe. Nemo daidai wurin shigarwa don ector Sensor da za a shigar.
Tsaftace wurin hawa. Hinge gefen a kan ƙananan lebe na ƙyanƙyashe.
Wannan matsayi yana rage yuwuwar lalacewa ga naúrar.
MATAKI NA 2
Aiwatar da bakin bakin ciki, rigar rufi na 3M Adhesion Promoter zuwa saman haɗin gwiwa kafin aikace-aikacen Tef ɗin 3M VHB. Yi amfani da mafi ƙarancin adadin da zai cika yankin da za a buga. 
MATAKI NA 3
Bada damar bushe gaba daya. Dangane da zafin jiki da zafi, Yawancin lokacin bushewa zai zama mintuna 1-2. Cire murfin manne na tef ɗin manne na Vector Sensor kuma tabbatar da cewa babu datti ko tarkace da suka hadu da mannen.
MATAKI NA 4
Aiwatar da Sensor Vector zuwa wurin da aka tsaftace akan ƙyanƙyashe. tabbatar da daidaitawar na'urar daidai ne. Rubutun lakabi dole ne ya kasance madaidaiciya. Latsa da ƙarfi kuma a ko'ina a kan gefuna na harka firikwensin don manne da ƙyanƙyashe. Aiwatar da 60 lbs na ƙarfi na daƙiƙa 20, jira 20 seconds, kuma maimaita sau ɗaya.
MATAKI NA 5
Danna maɓallin +, kewaya zuwa hanyar da aka fi so
MATAKI NA 6
Riƙe wayar hannu NFC zuwa firikwensin Vector don tabbatar da haɗin gwiwa da fara aikin haɗin gwiwa.
MATAKI NA 7
Sensor yanzu yana shirye don shigarwa da haɗa su.
Danna maɓallin Ci gaba. 
MATAKI NA 8
Tabbatar cewa hotuna a bayyane suke kuma a bayyane suke. Danna maɓallin Ci gaba. 
MATAKI NA 9
Zaɓi yanayin da za a yi amfani da shi yayin aiki, Hatch Danna maɓallin Ci gaba.
MATAKI NA 10
Bi umarnin kan allo don fara daidaitawa. Danna maɓallin Fara Ana dubawa. 
MATAKI NA 11
Zaɓi lambar ƙyanƙyashe daga jerin zaɓuka.
An haɗa firikwensin Hatch cikin nasara. Danna maɓallin Gama.
Kayan aikin Shigar da aka Shawarar
- 3M VHB
- 5962 m tef
- 3M Adhesion Proverer 111
- Tsaftace tsumma
MATAKI NA 1
Zaɓi Sarrafa na'urori don na'urar / firikwensin(s) da kuke so ku raba.
MATAKI NA 2
Zaɓi DEMOUNT DEVICE Danna Ok don tabbatar da tsarin ɓarna na na'ura / firikwensin (s)
MATAKI NA 3
Na'ura / firikwensin (s) an yi nasarar raba su daga ci gaba da kadara ta danna GAMA.
MATAKI NA 4
Idan ya dace: Ci gaba ta hanyar shigar da sabuwar na'urar zuwa kadara kuma yi amfani da Nexxiot Mounting App don haɗa sabuwar na'urar zuwa kadara. Lokacin da aka cire na'urar daga sabis, dole ne a mayar da ita zuwa Nexxiot Inc. (idan ba a yarda da kwangila ba).
Da fatan za a tuntuɓi babban abokin hulɗarku a Nexxiot ko tuntuɓar support@nexxiot.com don fara tsarin dawowa. Nexxiot Inc. yana sake sarrafa duk na'urori yadda ya kamata.
Kayan aikin Shigar da aka Shawarar
3M VHB 5962 m tef
3M Adhesion Proverer 111
Tsaftace tsumma
' 2024 nexxiot.com
Doc. Saukewa: 20240201005
Shafin: 1.0
Matsayi: YARDA
Rabewa: JAMA'A
Takardu / Albarkatu
 |
Nexxiot CTO Vector Hatch Sensor [pdf] Jagorar mai amfani CTO Vector Hatch Sensor, CTO, Vector Hatch Sensor, Hatch Sensor |