UC-5100 Series Jagoran Shigarwa Mai Sauri
Shafin 1.2, Janairu 2021
Bayanin Tuntuɓar Tallafin Fasaha
www.moxa.com/support

Ƙarsheview

An ƙera kwamfutoci na UC-5100 Series don aikace-aikacen sarrafa kansa na masana'antu. Kwamfutocin sun ƙunshi 4 RS-232/422/485 cikakken siginar siginar tashar jiragen ruwa tare da daidaitacce mai cirewa da jujjuyawar ƙasa, tashoshin CAN dual, LANs dual, tashoshin shigarwa na dijital 4, tashoshin fitarwa na dijital 4, soket SD, da kuma Karamin soket na PCIe don ƙirar mara waya a cikin ƙaƙƙarfan gidaje tare da dacewa ta gaba-gaba ga duk waɗannan mu'amalar sadarwa.

Samfurin Sunaye da Lissafin Bayanan Kunshin

Jerin UC-5100 ya haɗa da samfuran masu zuwa:
Saukewa: UC-5101-LX. Dandalin lissafin masana'antu tare da tashoshin jiragen ruwa na 4, 2 tashoshin Ethernet, soket SD, 4 DI, 4 DO, -10 zuwa 60 ° C kewayon zafin aiki
Saukewa: UC-5102-LX. Dandalin lissafin masana'antu tare da tashar jiragen ruwa na 4, 2 Ethernet tashar jiragen ruwa, SD soket, Mini PCIe soket, 4 DI, 4 DO, -10 zuwa 60 ° C kewayon zafin aiki
Saukewa: UC-5111-LX. Dandalin lissafin masana'antu tare da tashoshin jiragen ruwa na 4, 2 Ethernet tashar jiragen ruwa, SD soket, 2 CAN tashar jiragen ruwa, 4 DI, 4 DO, -10 zuwa 60 ° C aiki zazzabi kewayon
Saukewa: UC-5112-LX. Dandalin lissafin masana'antu tare da tashar jiragen ruwa na 4, 2 Ethernet tashar jiragen ruwa, SD soket, Mini PCIe soket, 2 CAN tashar jiragen ruwa, 4 DI, 4 DO, -10 zuwa 60 ° C aiki zazzabi kewayon
Saukewa: UC-5101-T-LX. Dandalin lissafin masana'antu tare da tashoshin jiragen ruwa na 4, 2 tashoshin Ethernet, soket SD, 4 DI, 4 DO, -40 zuwa 85 ° C kewayon zafin aiki
Saukewa: UC-5102-T-LX. Dandalin lissafin masana'antu tare da tashar jiragen ruwa na 4, 2 Ethernet tashar jiragen ruwa, SD soket, Mini PCIe soket, 4 DI, 4 DO, -40 zuwa 85 ° C kewayon zafin aiki
Saukewa: UC-5111-T-LX. Dandalin lissafin masana'antu tare da tashar jiragen ruwa na serial 4, 2 Ethernet tashar jiragen ruwa, SD soket, 2 CAN tashar jiragen ruwa, 4 DI, 4 DO, -40 zuwa 85 ° C aiki zazzabi kewayon
Saukewa: UC-5112-T-LX. Dandalin lissafin masana'antu tare da tashar jiragen ruwa na 4, 2 Ethernet tashar jiragen ruwa, SD soket, 2 CAN tashar jiragen ruwa, Mini PCIe soket, 4 DI, 4 DO, -40 zuwa 85 ° C aiki zazzabi kewayon
NOTE - Matsakaicin yanayin zafin aiki na samfuran zafin jiki mai faɗi shine:
-40 zuwa 70°C tare da na'urar LTE da aka shigar
-10 zuwa 70°C tare da shigar da na'urar Wi-Fi
Kafin shigar da kwamfutar UC-5100, tabbatar da cewa kunshin ya ƙunshi abubuwa masu zuwa:

• UC-5100 Series kwamfuta
• Console na USB
• Jackarfin wuta
• Jagoran Shigar Saurin (Buga)
• Katin garanti

Sanar da wakilin tallace-tallacen ku idan ɗaya daga cikin abubuwan da ke sama ya ɓace ko ya lalace.
NOTE Ana iya samun kebul na na'ura wasan bidiyo da jack ɗin wuta a ƙarƙashin gyare-gyaren ɓangaren litattafan almara a cikin akwatin samfurin.

Bayyanar

Saukewa: UC-5101Saukewa: UC-5102

Saukewa: UC-5111

Saukewa: UC-5112

LED Manuniya

An kwatanta aikin kowane LED a cikin tebur da ke ƙasa:

LED Name	Matsayi	Aiki
Ƙarfi	Kore	Wutar tana kunne kuma na'urar tana aiki akai-akai
	Kashe	An kashe wuta
Shirya	Yellow	An yi nasarar kunna OS kuma an shirya na'urar
Ethernet	Kore	A tsaye A kan hanyar haɗin Ethernet na 10 Mbps Kibta: Ana ci gaba da watsa bayanai
	Yellow	A tsaye A kunne: 100 Mbps hanyar haɗin Ethernet Kiftawa: Ana ci gaba da watsa bayanai
	Kashe	Gudun watsawa ƙasa da 10 Mbps ko kebul ɗin ba a haɗa shi ba
Serial (Tx)	Kore	Serial tashar jiragen ruwa yana watsa bayanai
	Kashe	Serial tashar jiragen ruwa baya watsa bayanai
Serial (Rx)	Yellow	Serial port yana karɓar bayanai
	Kashe	Serial tashar jiragen ruwa baya karɓar bayanai

LED Name	Matsayi	Aiki
L1/L2/L3 (UC-5102/5112)	Yellow	Adadin LEDs masu haskakawa yana nuna ƙarfin sigina. Duk LEDs: Madalla L1 & L2 LEDs: Yayi kyau L1 LED: Talauci
	Kashe	Babu samfurin mara waya da aka gano
L1/L2/L3 (UC-5101/5111)	Yellow/Kashe	LEDs masu shirye-shiryen da masu amfani suka ayyana

Maballin Sake saitin

An samar da kwamfutar UC-5100 tare da a Sake saiti maballin, wanda ke kan gaban gaban kwamfutar. Don sake kunna kwamfutar, danna maɓallin sake saiti na 1 seconds.

Sake saitin zuwa Maɓallin Default
Hakanan ana ba da UC-5100 tare da Rsaita zuwa Default maɓalli wanda za'a iya amfani dashi don sake saita tsarin aiki zuwa matsayin tsohuwar masana'anta. Latsa ka riƙe Sake saita zuwa Default maɓallin tsakanin 7 zuwa 9 seconds don sake saita kwamfutar zuwa saitunan masana'anta. Lokacin da maɓallin sake saiti ya riƙe ƙasa, da Shirya LED zai kiftawa sau ɗaya kowane daƙiƙa. The Shirya LED zai zama tsayayye lokacin da ka riƙe maɓallin ci gaba don 7 zuwa 9 seconds. Saki maɓallin a cikin wannan lokacin don loda tsoffin saitunan masana'anta.

Shigar da Kwamfuta

DIN-dogon hawa
Aluminum DIN-rail abin da aka makala farantin ya zo a haɗe zuwa cak ɗin samfur. Don hawan UC-5100 akan dogo na DIN, tabbatar da cewa taurin karfe yana fuskantar sama kuma bi waɗannan matakan.

Mataki na 1	Mataki na 2
Saka saman dogo na DIN cikin ramin da ke ƙasa da ƙaƙƙarfan marmaro na ƙarfe a cikin ƙugiya na sama na kayan hawan dogo na DIN.	Matsa UC-5100 zuwa layin dogo na DIN har sai abin da aka makala DIN-dogo ya shiga cikin wurin.

Bukatun Waya
Tabbatar karanta kuma ku bi waɗannan matakan tsaro na gama gari kafin a ci gaba da shigar da kowace na'urar lantarki:

• Yi amfani da hanyoyi daban-daban don yin wayoyi don wuta da na'urori. Idan hanyoyin wutar lantarki da na'urar dole ne su ketare, tabbatar da cewa wayoyi sun kasance daidai-da-wane a wurin mahadar.
  NOTE Kada ku kunna sigina ko na'urorin sadarwa da na'urorin wutar lantarki a cikin mashigar waya iri ɗaya. Don guje wa tsangwama, wayoyi masu halayen sigina daban-daban ya kamata a karkatar dasu daban.
• Yi amfani da nau'in siginar da ake watsa ta waya don tantance waɗanne wayoyi ya kamata a ware su. Ka'idar babban yatsan yatsa ita ce wayoyi masu raba irin halayen lantarki ana iya haɗa su tare.
• A kiyaye shigar da wayoyi da na'urorin fitarwa daban.
• Ana shawarce ka da ka yiwa duk na'urori lakabin waya don sauƙin ganewa.

HANKALI
Tsaro Farko!
Tabbatar cire haɗin wutar lantarki kafin sakawa da/ko haɗa kwamfutocin ku na UC-5100 Series.
Tsanaki Waya!
Yi ƙididdige iyakar yuwuwar halin yanzu a cikin kowace wayar wuta da waya gama gari. Kula da duk lambobin lantarki waɗanda ke nuna iyakar halin yanzu da aka halatta ga kowace girman waya. Idan halin yanzu ya wuce matsakaicin ma'auni, wayoyi na iya yin zafi sosai, yana haifar da mummunar illa ga kayan aikin ku. An yi nufin samar da wannan kayan aikin ta ƙwararriyar Ƙarfin Wutar Lantarki ta Waje, wanda fitar da shi ya cika ka'idojin SELV da LPS.
Tsananin zafin jiki!
Yi hankali lokacin sarrafa naúrar. Lokacin da aka toshe naúrar, abubuwan da ke ciki suna haifar da zafi, saboda haka, rumbun na waje na iya jin zafi don taɓawa.
Anyi nufin wannan kayan aikin don shigarwa a Wuraren Ƙuntatacce Samun damar.

Haɗa Wutar

Haɗa layin wutar lantarki 9 zuwa 48 VDC zuwa tashar tashar tashar, wanda shine mai haɗawa zuwa kwamfutar UC-5100 Series. Idan an ba da wutar lantarki yadda ya kamata, da Ƙarfi LED zai haskaka haske mai ƙarfi. Ana nuna wurin shigar da wutar lantarki da ma'anar fil a cikin zanen da ke kusa.
SG: Gidan Garkuwa (wani lokaci ana kiransa Kare Ground) tuntuɓar tuntuɓar da ke ƙasan mai haɗin tashar wutar lantarki mai 3-pin lokacin da viewed daga kusurwar da aka nuna a nan. Haɗa waya zuwa saman ƙasa mai dacewa da ƙarfe ko zuwa dunƙule ƙasa a saman na'urar.
NOTE Ma'aunin shigarwa na UC-5100 Series shine 9-48 VDC, 0.95-0.23 A.
Ƙaddamar da Unit
Ƙaddamar da ƙasa da hanyar waya suna taimakawa iyakance tasirin amo saboda kutsewar lantarki (EMI). Gudun haɗin ƙasa daga mai haɗin toshe tasha zuwa saman ƙasa kafin haɗa wutar lantarki. Lura cewa wannan samfurin ana nufin a ɗora shi a kan shimfidar wuri mai tushe mai kyau, kamar gunkin ƙarfe.

Haɗawa zuwa tashar Console

Tashar tashar wasan bidiyo ta UC-5100 tashar jiragen ruwa ce ta RJ45 ta RS-232 wacce ke kan gaban panel. An ƙirƙira shi don haɗawa zuwa tashoshin wasan bidiyo na serial, waɗanda ke da amfani viewsaƙon boot-up, ko don gyara al'amurran boot-up na tsarin.

Haɗa zuwa Cibiyar sadarwa

Tashar jiragen ruwa na Ethernet suna kan gaban panel na UC-5100. Ana nuna ayyukan fil na tashar tashar Ethernet a cikin adadi mai zuwa. Idan kana amfani da kebul naka, tabbatar da cewa ayyukan fil akan mahaɗin kebul na Ethernet sun dace da ayyukan fil akan tashar Ethernet.

Haɗa zuwa Serial Device

Serial ports suna kan gaban gaban kwamfutar UC-5100. Yi amfani da kebul na serial don haɗa serial na'urar zuwa tashar jiragen ruwa ta kwamfuta. Wadannan serial ports suna da masu haɗin RJ45 kuma ana iya saita su don sadarwar RS-232, RS-422, ko RS-485. Ana nuna wurin fil da ayyuka a cikin tebur da ke ƙasa.

 Haɗa zuwa Na'urar DI/DO

Kwamfutar UC-5100 Series tana zuwa tare da masu haɗin shigarwa na gabaɗaya guda 4 da masu haɗa kayan fitarwa na gaba ɗaya guda 4. Waɗannan masu haɗa haɗin suna kan saman panel ɗin kwamfutar. Koma zuwa zanen hagu don ma'anar fil na masu haɗawa. Don hanyar wayar, koma zuwa adadi masu zuwa. Kwamfutar UC-5100 Series tana zuwa tare da masu haɗin shigarwa na gabaɗaya guda 4 da masu haɗa kayan fitarwa na gaba ɗaya guda 4. Waɗannan masu haɗin suna samuwa a saman panel na
kwamfuta. Koma zuwa zanen hagu don ma'anar fil na masu haɗawa. Don hanyar wayar, koma zuwa adadi masu zuwa.

Haɗa zuwa Na'urar CAN

Ana ba da UC-5111 da UC-5112 tare da tashoshin CAN guda 2, suna ba masu amfani damar haɗi zuwa na'urar CAN. Ana nuna wurin fil da ayyuka a cikin tebur mai zuwa:

Haɗa Module na Wayar hannu/Wi-Fi da Eriya

Kwamfutocin UC-5102 da UC-5112 sun zo da Mini PCIe soket guda ɗaya don shigar da tsarin salula ko Wi-Fi. Cire sukurori biyu a gefen dama don cire murfin kuma nemo wurin soket.Kunshin tsarin salula ya ƙunshi tsarin salula 1, da sukurori 2. Yakamata a siyi eriya ta salula daban don dacewa da buƙatun shigarwa.

1. Bi waɗannan matakan don shigar da tsarin salula. Ajiye igiyoyin eriya a gefe don dacewar shigarwa kuma share soket ɗin ƙirar mara waya kamar yadda aka nuna a cikin adadi.
2. Saka tsarin salula a cikin soket kuma a ɗaure sukurori biyu (wanda aka haɗa a cikin kunshin) a saman tsarin. Mun ba da shawarar yin amfani da tweezer lokacin shigarwa ko cire tsarin.
3. Haɗa free iyakar igiyoyin eriya biyu kusa da sukurori kamar yadda aka nuna a hoton.
4. Maye gurbin murfin kuma kiyaye shi ta amfani da sukurori biyu.
5. Haɗa eriya ta salula zuwa masu haɗawa. Masu haɗin eriya suna kan gaban panel ɗin kwamfutar.

Kunshin tsarin Wi-Fi ya ƙunshi 1 Wi-Fi module, da sukurori 2. Adaftan eriya da eriyar Wi-Fi yakamata a siyi daban don dacewa da buƙatun shigarwa.Bi waɗannan matakan don shigar da tsarin Wi-Fi.

1. Ajiye igiyoyin eriya a gefe don dacewar shigarwa kuma share soket ɗin ƙirar mara waya kamar yadda aka nuna a cikin adadi.
2. Saka tsarin salula a cikin soket kuma a ɗaure sukurori biyu (wanda aka haɗa a cikin kunshin) a saman tsarin. Mun ba da shawarar yin amfani da tweezer lokacin shigarwa ko cire tsarin.
3. Haɗa free iyakar igiyoyin eriya biyu kusa da sukurori kamar yadda aka nuna a hoton.
4. Sauya murfin kuma kiyaye shi tare da sukurori biyu.
5. Haɗa adaftar eriya zuwa masu haɗawa a gaban panel ɗin kwamfutar.
6. Haɗa eriyar Wi-Fi zuwa adaftar eriya.

Shigar da Micro SIM Cards

Kuna buƙatar shigar da katin SIM na Micro SIM akan kwamfutar ku ta UC-5100. Bi waɗannan matakan don shigar da Micro SIM katin.

1. Cire dunƙule a kan murfin da ke kan gaban panel na UC-5100.
2. Saka Micro SIM katin a cikin soket. Tabbatar kun sanya katin a hanya madaidaiciya.
   Don cire Micro SIM katin, kawai danna Micro SIM katin kuma sake shi.

Lura: Akwai soket ɗin katin SIM guda biyu da ke ba masu amfani damar shigar da katunan SIM guda biyu a lokaci guda. Koyaya, katin Micro SIM ɗaya ne kawai za'a iya kunna don amfani.

Shigar da katin SD

Kwamfutocin UC-5100 Series sun zo tare da soket don faɗaɗa ajiya wanda ke ba masu amfani damar shigar da katin SD. Bi waɗannan matakan don shigar da katin SD:

1. Cire dunƙule kuma cire murfin panel. SD soket yana kan gaban panel na kwamfutar.
2. Saka katin SD a cikin soket. Tabbatar cewa an saka katin ta hanyar da ta dace.
3. Sauya murfin kuma ɗaure dunƙule a kan murfin don tabbatar da murfin.

Don cire katin SD, kawai danna katin kuma saka shi.

Daidaita Canjawar CAN DIP

Kwamfutocin UC-5111 da UC-5112 sun zo tare da sauyawa CAN DIP guda ɗaya don masu amfani don daidaita sigogin CAN ƙarewa. Don saita canjin DIP, yi haka:

1. Nemo wurin sauya DIP a saman ɓangaren kwamfutar
2. Daidaita saitin kamar yadda ake buƙata. Ƙimar ON ita ce 120Ω, kuma ƙimar tsoho tana KASHE.

Daidaita Serial Port DIP Switch

Kwamfutocin UC-5100 sun zo tare da sauyawar DIP don masu amfani don daidaita masu jujjuyawar cirewa / cirewa don sigogin tashar tashar jiragen ruwa. Serial port DIP switch yana kan kasan panel na kwamfutar.
Daidaita saitin kamar yadda ake buƙata. Saitin ON yayi daidai da 1K kuma saitin KASHE yayi daidai da 150K. An kashe saitunan tsoho.Kowace tashar jiragen ruwa ta ƙunshi 4 fil; Dole ne ku canza duk fil 4 na tashar jiragen ruwa lokaci guda don daidaita darajar tashar.

Takardu / Albarkatu

MOXA UC-5100 Series Arm Based Computer [pdf] Jagoran Shigarwa UC-5100 Series, Kwamfuta ta Hannu

Magana

• Manual mai amfani