STAMPS3A Card Size Computer
“
Ƙayyadaddun bayanai:
- Product Name: M5Stack Cardputer V1.1
- Kamfanin Firmware
Umarnin Amfani da samfur:
1. Shiri:
Koma zuwa M5Burner koyawa don kammala firmware walƙiya
tool download, and then refer to the image below to download the
corresponding firmware.
Zazzage mahaɗin: M5 Burner
Firmware Flashing Tool
2. Shigar da Driver USB:
Ensure the USB drivers are installed on your computer before
proceeding with the firmware flashing process.
3. Zaɓin Port:
Connect the device to the computer via a USB cable. After the
driver installation is complete, select the corresponding device
port in M5Burner.
4. Konewa:
Click on the ‘Burn’ button in M5Burner to start the flashing
aiwatar da firmware na masana'anta akan na'urar.
FAQ:
Q1: Why is my Cardputer v1.1 black screen/won’t boot?
Solution: Use M5Burner to flash official Factory Firmware for
Cardputer User Demo.
Q2: Me yasa kawai yake aiki don 3 hours? Me yasa ake cajin zuwa
100% in 1 minute, and turn off when removing the charging
kebul?
Solution: Flash back to official firmware. Using unofficial
firmware can void warranty, cause instability, and expose your
device to security risks. Proceed with caution.
"'
M5Stack Cardputer V1.1
Kamfanin Firmware
Lokacin da na'urar ta ci karo da al'amurran da suka shafi aiki, za ku iya gwada sake kunna firmware na masana'anta don bincika ko akwai matsala ta hardware. Koma zuwa koyawa mai zuwa. Yi amfani da M5Burner firmware kayan aikin walƙiya don kunna firmware na masana'anta akan na'urar.
FAQ
Q1: Why is my Cardputer v1.1 black screen/won’t boot?
Solutions: M5Burner Burn official Factory Firmware”Cardputer User Demo”
Q2: Me yasa lokacin aiki kawai 3 hours? Me yasa yake cajin 100% a cikin minti 1, cire kebul na caji zai kashe?
Solutions:”Bruce for Cardputer”This is an unofficial firmware.Flashing unofficial firmware can void your warranty, cause instability, and expose your device to security risks. Proceed with caution. Please Burn back official firmware.
1. Shiri
o Koma zuwa koyaswar M5Burner don kammala aikin zazzagewar kayan aikin firmware, sannan koma zuwa hoton da ke ƙasa don zazzage firmware daidai.
Zazzage hanyar haɗi: https://docs.m5stack.com/en/uiflow/m5burner/intro
2. Shigar da Driver USB
Driver Installation Tip Click the link below to download the driver matching your operating system. The driver package for the CP34X (for the CH9102 version) can be downloaded and installed by selecting the installation package corresponding to your operating system. If you encounter issues with program download (such as timeout or “Failed to write to target RAM” errors), try reinstalling the device driver. CH9102_VCP_SER_Windows https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/drivers/CH9102_VCP_MacOS_v1.7.zip Port Selection on MacOS On MacOS, there may be two available ports. When using them, please select the port named wchmodem.
3. Zaɓin Port
Haɗa na'urar zuwa kwamfuta ta kebul na USB. Bayan shigar direban ya cika, zaku iya zaɓar tashar na'urar da ta dace a cikin M5Burner.
4. Konewa
Danna "Burn" don fara aiwatar da walƙiya.
Takardu / Albarkatu
 |
M5Stack STAMPS3A Card Size Computer [pdf] Jagorar mai amfani STAMPS3A Card Size Computer, STAMPS3A, Card Size Computer, Size Computer, Computer |