M5Stack-لوگو

ايم 5 اسٽيڪ ايس ٽيAMPS3A ڪارڊ سائيز ڪمپيوٽر

M5Stack-STAMPS3A-Card-Size-Computer-PRODUCT

وضاحتون

  • Product Name: M5Stack Cardputer V1.1
  • فيڪٽري فرم ویئر

پيداوار جي استعمال جون هدايتون

تياري:

  • فرم ويئر فليشنگ ٽول ڊائون لوڊ مڪمل ڪرڻ لاءِ M5Burner ٽيوٽوريل ڏسو، ۽ پوءِ لاڳاپيل فرم ويئر ڊائون لوڊ ڪرڻ لاءِ هيٺ ڏنل تصوير ڏسو.
  • Download link: M5Burner Firmware Flashing Tool

USB ڊرائيور تنصيب:
Ensure the USB drivers are installed on your computer before proceeding with the firmware flashing process.

فيڪٽري فرم ویئر

  • جڏهن ڊوائيس آپريشنل مسئلن کي منهن ڏئي ٿي، ته توهان فيڪٽري فرم ويئر کي ٻيهر فليش ڪرڻ جي ڪوشش ڪري سگهو ٿا ته ڇا ڪو هارڊويئر خرابي آهي. هيٺ ڏنل سبق ڏسو. فيڪٽري فرم ويئر کي ڊوائيس تي فليش ڪرڻ لاءِ M5Burner فرم ويئر فليشنگ ٽول استعمال ڪريو.

M5Stack-STAMPS3A-Card-Size-Computer-FIG- (1)

تياري
Refer to the M5Burner tutorial to complete the firmware flashing tool download, and then refer to the image below to download the corresponding firmware. Download link: https://docs.m5stack.com/en/uiflow/m5burner/intro

M5Stack-STAMPS3A-Card-Size-Computer-FIG- (2)

USB ڊرائيور جي انسٽاليشن

ڊرائيور لڳائڻ جي صلاح
Click the link below to download the driver matching your operating system. The driver package for the CP34X(forthe CH9102 version) can be downloaded and installed by selecting the installation package corresponding to your operating system. If you encounter issues with program download (such as timeout or “Failed to write to target RAM”errors), try reinstalling the device driver.

CH9102_VCP_SER_ونڊوز
https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/drivers/CH9102-VCP-MacOS-v1.7.zip

MacOS تي پورٽ چونڊ
MacOS تي، ٻه پورٽ موجود ٿي سگهن ٿا. انهن کي استعمال ڪرڻ وقت، مهرباني ڪري wchmodem نالي پورٽ چونڊيو.

پورٽ چونڊ
USB ڪيبل ذريعي ڊوائيس کي ڪمپيوٽر سان ڳنڍيو. ڊرائيور جي انسٽاليشن مڪمل ٿيڻ کان پوءِ، توهان M5Burner ۾ لاڳاپيل ڊوائيس پورٽ چونڊي سگهو ٿا.

M5Stack-STAMPS3A-Card-Size-Computer-FIG- (3)

ساڙيو
چمڪائڻ واري عمل کي شروع ڪرڻ لاءِ "برن" تي ڪلڪ ڪريو.

M5Stack-STAMPS3A-Card-Size-Computer-FIG- (4)

FAQs

Q1: Why is my Cardputer v1.1 black screen/won't boot?

Solutions: M5Burner Burn official Factory Firmware“Cardputer User Demo”

Q2: Why it working time only 3 hours? Why does it 100% charge in 1 minute, remove the charging cable it will turnoff?

Solutions:“Bruce for Cardputer”This is an unofficial firmware.Flashing unofficial firmware can voidyour warranty,cause instability, and expose your device to security risks. Proceed with caution. Please Burn back official firmware

دستاويز / وسيلا

ايم 5 اسٽيڪ ايس ٽيAMPS3A ڪارڊ سائيز ڪمپيوٽر [pdf] استعمال ڪندڙ ھدايت
STAMPS3A Card Size Computer, STAMPS3A, Card Size Computer, Size Computer, Computer

حوالو

تبصرو ڇڏي ڏيو

توهان جو اي ميل پتو شايع نه ڪيو ويندو. گهربل فيلڊ نشان لڳل آهن *