M5Stack STAMPS3A Card Size Computer
Specifications
- Product Name: M5Stack Cardputer V1.1
- Factory Firmware
Product Usage Instructions
Preparation:
- Refer to the M5Burner tutorial to complete the firmware flashing tool download, and then refer to the image below to download the corresponding firmware.
- Download link: M5Burner Firmware Flashing Tool
USB Driver Installation:
Ensure the USB drivers are installed on your computer before proceeding with the firmware flashing process.
Factory Firmware
- When the device encounters operational issues, you can try re-flashing the factory firmware to check if there is any hardware malfunction. Refer to the following tutorial. Use the M5Burner firmware flashing tool to flash the factory firmware onto the device.
Preparation
Refer to the M5Burner tutorial to complete the firmware flashing tool download, and then refer to the image below to download the corresponding firmware. Download link: https://docs.m5stack.com/en/uiflow/m5burner/intro
USB Driver Installation
Driver Installation Tip
Click the link below to download the driver matching your operating system. The driver package for the CP34X(forthe CH9102 version) can be downloaded and installed by selecting the installation package corresponding to your operating system. If you encounter issues with program download (such as timeout or “Failed to write to target RAM”errors), try reinstalling the device driver.
CH9102_VCP_SER_Windows
https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/drivers/CH9102-VCP-MacOS-v1.7.zip
Port Selection on MacOS
On MacOS, there may be two available ports. When using them, please select the port named wchmodem.
Port Selection
Connect the device to the computer via a USB cable. After the driver installation is complete, you can select the corresponding device port in M5Burner.
Burn
Click “Burn” to start the flashing process.
FAQs
Q1: Why is my Cardputer v1.1 black screen/won't boot?
Solutions: M5Burner Burn official Factory Firmware“Cardputer User Demo”
Q2: Why it working time only 3 hours? Why does it 100% charge in 1 minute, remove the charging cable it will turnoff?
Solutions:“Bruce for Cardputer”This is an unofficial firmware.Flashing unofficial firmware can voidyour warranty,cause instability, and expose your device to security risks. Proceed with caution. Please Burn back official firmware
Documents / Resources
 | M5Stack STAMPS3A Card Size Computer [pdf] User Guide STAMPS3A Card Size Computer, STAMPS3A, Card Size Computer, Size Computer, Computer |