LAUNCHKEY MK4 MIDI Masu Kula da Allon madannai
Ƙayyadaddun bayanai:
- Samfura: Launchkey MK4
- Shafin: 1.0
- MIDI Interfaces: USB da MIDI DIN fitarwa tashar jiragen ruwa
Bayanin samfur
Launchkey MK4 shine mai sarrafa MIDI wanda ke sadarwa ta amfani da MIDI akan USB da DIN. Yana fasalta musaya na MIDI guda biyu, yana samar da nau'i-nau'i biyu na abubuwan shigar MIDI da abubuwan fitarwa akan USB. Bugu da ƙari, yana da tashar fitarwa ta MIDI DIN da ke watsa bayanai iri ɗaya kamar yadda aka karɓa akan tashar tashar MIDI A (USB).
Bootloader:
Na'urar tana da bootloader don fara tsarin.
MIDI akan Launchkey MK4:
Idan kuna son amfani da maɓallin Launch ɗin azaman filin sarrafawa don DAW (Digital Audio Workstation), zaku iya canzawa zuwa yanayin DAW. In ba haka ba, zaku iya yin hulɗa tare da na'urar ta amfani da haɗin MIDI.
Tsarin Saƙon SysEx:
Saƙonnin SysEx da na'urar ke amfani da ita suna da ƙayyadaddun tsarin rubutun kai dangane da nau'in SKU, sannan sai bytes na umarni don zaɓar ayyuka da bayanan da ake buƙata don waɗannan ayyukan.
Yanayin tsaye (MIDI)
Ƙaddamar da Ƙaddamarwa yana da iko zuwa yanayin Standalone, wanda baya samar da takamaiman ayyuka don hulɗar DAW. Koyaya, yana aika abubuwan Canjin Canjin MIDI akan Channel 16 don ɗaukar abubuwan da suka faru akan maɓallan sarrafa DAW.
Umarnin Amfani da samfur
- Ƙarfafawa: Launchkey MK4 yana yin iko zuwa yanayin Standalone.
- Hanyoyin Canjawa: Don amfani da yanayin DAW, koma zuwa dubawar DAW. In ba haka ba, yi hulɗa tare da na'urar ta amfani da haɗin MIDI.
- Saƙonnin SysEx: Fahimtar tsarin saƙon SysEx da na'urar ke amfani da ita don sadarwa yadda ya kamata.
- Ikon MIDI: Yi amfani da MIDI Control Canjin abubuwan da suka faru akan Channel 16 don ɗaukar abubuwan da suka faru akan maɓallan sarrafa DAW.
FAQ:
Tambaya: Ta yaya zan canza tsakanin Yanayin Standalone da yanayin DAW akan Launchkey MK4?
A: Don canjawa zuwa yanayin DAW, koma zuwa dubawar DAW. In ba haka ba, na'urar tana yin ƙarfi zuwa yanayin Standalone ta tsohuwa.
MASU SHIRYA
Jagorar Magana
Shafin 1.0
Kaddamar da Jagorar Maganar Shirye-shiryen MK4
Game da wannan Jagora
Wannan takaddar tana ba da duk bayanan da kuke buƙata don samun damar sarrafa Launchkey MK4. Launchkey yana sadarwa ta amfani da MIDI akan USB da DIN. Wannan takarda ta bayyana aiwatar da MIDI na na'urar, abubuwan da suka faru na MIDI da ke fitowa daga gare ta, da kuma yadda za a iya samun dama ga fasalulluka daban-daban na Launchkey ta hanyar saƙonnin MIDI.
Ana bayyana bayanan MIDI a cikin wannan jagorar ta hanyoyi da yawa:
- Cikakken bayanin saƙon turanci.
- Lokacin da muka kwatanta bayanin kula na kiɗa, ana ɗaukar tsakiyar C a matsayin 'C3' ko bayanin kula 60. Tashar MIDI 1 ita ce tashar MIDI mafi ƙasƙanci-lambobi: tashoshi daga 1 zuwa 16.
- Hakanan ana bayyana saƙon MIDI a cikin bayyananniyar bayanai, tare da daidaitattun ƙima da hexadecimal. Lambobin hexadecimal koyaushe za a bi su ta hanyar 'h' da kuma daidai gwargwado da aka bayar a cikin brackets. Don misaliample, bayanin kula akan saƙo akan tashar 1 ana nuna shi da matsayi byte 90h (144).
Bootloader
Launchkey yana da yanayin bootloader wanda ke ba mai amfani damar yin hakan view nau'ikan FW na yanzu, kuma kunna / kashe Easy Start. Ana samun dama ga bootloader ta hanyar riƙe maɓallin Octave Up da Octave Down tare yayin ƙarfafa na'urar. Allon zai nuna lambobin sigar Application na yanzu da Bootloader.
Ana iya amfani da maɓallin rikodin don kunna Sauƙaƙe Fara. Lokacin da Sauƙin Farawa ke kunne, Ƙaddamarwa yana nunawa azaman Na'urar Ma'ajiya ta Jama'a don samar da mafi dacewa ƙwarewa na farko. Kuna iya kashe wannan da zarar kun saba da na'urar don kashe wannan Na'urar Ma'ajiyar Jama'a.
Ana iya amfani da maɓallin Play don fara aikace-aikacen.
MIDI akan Launchkey MK4
Makullin ƙaddamarwa yana da mu'amalar MIDI guda biyu, yana samar da nau'i-nau'i biyu na abubuwan shigar MIDI da fitarwa akan USB. Gasu kamar haka:
- MIDI In / Out (ko farkon fara dubawa akan Windows): Ana amfani da wannan hanyar sadarwa don karɓar MIDI daga yin (maɓallai, ƙafafu, pad, tukunya, da Fader Custom Modes); kuma ana amfani dashi don samar da shigarwar MIDI na waje.
• DAW In/ Out (ko na biyu dubawa a kan Windows): DAWs da makamantansu na amfani da wannan ƙirar don yin hulɗa tare da Launchkey.
Har ila yau Launchkey yana da tashar fitarwa ta MIDI DIN, wanda ke watsa bayanai iri ɗaya kamar yadda ake karɓa a tashar tashar MIDI In (USB). Lura cewa wannan ya keɓance martani ga buƙatun da mai watsa shiri ya bayar ga maɓallin ƙaddamarwa akan MIDI Out (USB).
Idan kuna son amfani da Launchkey azaman filin sarrafawa don DAW (Digital Audio Workstation), wataƙila kuna son amfani da ƙirar DAW (Duba Yanayin DAW [11]).
In ba haka ba, zaku iya yin hulɗa tare da na'urar ta amfani da ƙirar MIDI. Maɓallin ƙaddamarwa yana aika bayanin kula Akan (90h - 9Fh) tare da sifili mai sauri don Kashe bayanin kula. Yana karɓar ko dai Note Offs (80h - 8Fh) ko Note Ons (90h - 9Fh) tare da sifilin sifili don Kashe bayanin kula.
Tsarin saƙon SysEx da na'urar ke amfani da shi
Duk saƙonnin SysEx suna farawa da taken mai zuwa, ba tare da la'akari da alkibla ba (Mai watsa shiri → Maɓalli ko Launchkey → Mai watsa shiri):
SKUs na yau da kullun:
- Hex: F0h 00h 20h 29h 02h 14h
- Dec: 240 0 32 41 2 20
Mini SKUs:
- Hex: F0h 00h 20h 29h 02h 13h
- Dec: 240 0 32 41 2 19
Bayan taken umarni byte ne, zaɓi aikin da za a yi amfani da shi, sannan duk bayanan da ake buƙata don wannan aikin.
Yanayin tsaye (MIDI).
Maɓallin ƙaddamarwa yana yin ƙarfi zuwa yanayin A tsaye. Wannan yanayin baya samar da takamaiman ayyuka don hulɗa tare da DAWs, yanayin DAW in/out (USB) ya kasance mara amfani don wannan dalili. Koyaya, don samar da hanyoyin ɗaukar abubuwan da suka faru akan maɓallan sarrafa DAW na Launchkey, suna aika abubuwan Canjin Gudanar da MIDI akan Channel 16 (Matsayin MIDI: BFh, 191) akan mahaɗin MIDI a / waje (USB) da tashar tashar MIDI DIN:
Hoto 2. Hexadecimal:
Maɓallin Fara da Tsaida (Farawa da Shift + Fara akan Launchkey Mini SKUs) suna fitar da MIDI Real Time Start kuma Tsaida saƙonni bi da bi.
Lokacin ƙirƙirar Yanayin Al'ada don maɓallin ƙaddamarwa, kiyaye waɗannan a hankali idan kuna saita abubuwan sarrafawa don aiki akan tashar MIDI 16.
Yanayin DAW
Yanayin DAW yana ba da DAWs da ayyukan software kamar DAW don fahimtar mu'amalar mai amfani da hankali akan saman Launchkey. Ƙarfin da aka kwatanta a wannan babin yana samuwa ne kawai da zarar yanayin DAW ya kunna.
Ana iya samun duk ayyukan da aka kwatanta a wannan babi ta hanyar DAW In/Out (USB).
Ikon yanayin DAW
Kunna Yanayin DAW:
- Hex: 9fh 0Ch 7Fh
- Dec: 159 12 127
Kashe Yanayin DAW:
- Hex: 9Fh 0Ch 00h
- Dec: 159 12 0
Lokacin da software mai kama da DAW ta gane Launchkey kuma ta haɗa zuwa gare ta, ya kamata ta fara shigar da yanayin DAW (aika 9Fh 0Ch 7Fh), sannan, idan ya cancanta, kunna fasalin fasalin (duba sashin "Launchkey MK4 feature controls") wannan takarda) Lokacin da software mai kama da DAW ta fita, yakamata ta fita daga yanayin DAW akan Launchkey (aika 9Fh 0Ch 00h) don mayar da ita zuwa yanayin Standalone (MIDI).
Fuskar cikin yanayin DAW
A cikin yanayin DAW, akasin yanayin keɓantacce (MIDI), duk maɓalli, da abubuwan da ba su da alaƙa da fasalulluka na aiki (kamar Yanayin Al'ada) ana iya isa ga kuma za su ba da rahoto akan keɓancewar DAW In/Out (USB) kawai. Maɓallan ban da waɗanda ke cikin Faders an tsara su don Sarrafa abubuwan da ke faruwa kamar haka:
Hoto 3. Decimal:
Hoto 4. Hexadecimal:
Hakanan ana amfani da fihirisar Canjin Canjin da aka jera don aika launi zuwa LEDs masu dacewa (idan maɓallin yana da wani), duba Launi na saman [14].
Akwai ƙarin hanyoyi a yanayin DAW
Da zarar a cikin yanayin DAW, waɗannan ƙarin hanyoyin suna samuwa:
- Yanayin DAW akan pads.
- Plugin, Mixers, Aika & Sufuri akan maɓallan.
- Ƙarar kan fader (Launchkey 49/61 kawai).
Lokacin shigar da yanayin DAW, ana saita saman ta hanya mai zuwa:
- Gammaye: DAW.
- Rubuce-rubuce: Filashi.
- Faders: girma (Launchkey 49/61 kawai).
DAW ya kamata ya fara kowane ɗayan waɗannan wuraren daidai.
Rahoton yanayin kuma zaɓi
Abubuwan da ke faruwa na MIDI za su iya sarrafa hanyoyin pads, encoders, da fader kuma Launchkey ana ba da rahoto a baya duk lokacin da ya canza yanayin saboda ayyukan mai amfani. Waɗannan saƙonni suna da mahimmanci don ɗauka, kamar yadda DAW ya kamata ya bi su yayin saitawa da amfani da saman kamar yadda aka yi niyya bisa yanayin da aka zaɓa.
Yanayin pad
Ana ba da rahoton canje-canjen yanayin kundi ko ana iya canza su ta hanyar taron MIDI mai zuwa:
- Tashoshi 7 (Matsayin MIDI: B6h, 182), Canjin Canjin 1Dh (29)
An tsara hanyoyin Pad zuwa dabi'u masu zuwa:
- 01h (1): Tsarin ganga
- 02h (2): Tsarin DAW
- 04h (4): Lambobin mai amfani
- 05h (5): Yanayin al'ada 1
- 06h (6): Yanayin al'ada 2
- 07h (7): Yanayin al'ada 3
- 08h (8): Yanayin al'ada 4
- 0Dh (13): Tsarin Arp
- 0Eh (14): Map
Hanyoyin encoder
Ana ba da rahoton canje-canjen yanayin encoder ko ana iya canza su ta hanyar taron MIDI mai zuwa:
- Tashar 7 (Matsalar MIDI: B6h, 182), Canjin Canjin 1Eh (30)
An tsara hanyoyin canza rikodin zuwa dabi'u masu zuwa:
- 01h (1): Mixer
- 02h (2): Plugin
- 04h (4): Aika
- 05h (5): sufuri
- 06h (6): Yanayin al'ada 1
- 07h (7): Yanayin al'ada 2
- 08h (8): Yanayin al'ada 3
- 09h (9): Yanayin al'ada 4
Yanayin Fader (Launchkey 49/61 kawai)
Ana ba da rahoton canje-canjen yanayin Fader ko ana iya canza su ta hanyar taron MIDI mai zuwa:
- Tashoshi 7 (Matsayin MIDI: B6h, 182), Canjin Canjin 1Fh (31)
An tsara hanyoyin fader zuwa dabi'u masu zuwa:
- 01h (1): girma
- 06h (6): Yanayin al'ada 1
- 07h (7): Yanayin al'ada 2
- 08h (8): Yanayin al'ada 3
- 09h (9): Yanayin al'ada 4
Yanayin DAW
An zaɓi yanayin DAW akan pads akan shigar da yanayin DAW, kuma lokacin da mai amfani ya zaɓa ta menu na Shift. Pads ɗin suna ba da rahoto a matsayin bayanin kula (Matsayin MIDI: 90h, 144) da kuma bayanta (Matsayin MIDI: A0h, 160) abubuwan da suka faru (na ƙarshen kawai idan an zaɓi Polyphonic Aftertouch) akan Channel 1, kuma ana iya samun dama don canza LEDs ɗin su ta waɗannan abubuwan. fihirisa:
Yanayin ganga
Yanayin Drum akan pads na iya maye gurbin yanayin Drum na tsaye (MIDI), yana ba da dama ga DAW don sarrafa launukansa da karɓar saƙonni akan tashar DAW MIDI. Ana yin haka ta hanyar aika saƙon da ke ƙasa:
- Hex : B6h 54h
- Dec : 182 84 1
Ana iya mayar da yanayin ganga zuwa aiki kadai tare da saƙon da ke ƙasa:
- Hex : b6h 54h
- Dec : 182 84
Pads ɗin suna ba da rahoto a matsayin bayanin kula (Matsayin MIDI: 9Ah, 154) da Aftertouch (Matsayin MIDI: AAh, 170) abubuwan da suka faru (na ƙarshen kawai idan an zaɓi Polyphonic Aftertouch) akan Channel 10, kuma ana iya samun dama ga canza launin LEDs (duba " Yin canza launin saman saman [14]”) ta waɗannan fihirisa:
Hanyoyin encoder
Cikakken Yanayin
Encoders a cikin hanyoyi masu zuwa suna ba da saiti iri ɗaya na Canje-canje na Sarrafa akan Channel 16 (Matsayin MIDI: BFh, 191):
- Plugin
- Mixer
- Aika
Alamar Canjin Sarrafa da aka bayar sune kamar haka:
Idan DAW ya aika musu da bayanin matsayi, suna ɗauka ta atomatik.
Yanayin dangi
Yanayin Sufuri yana amfani da yanayin fitarwa na dangi tare da Canje-canje na Sarrafa akan Tashoshi 16 (Matsayin MIDI: BFh, 191):
A cikin Yanayin Dangi, ƙimar pivot shine 40h (64) (babu motsi). Ƙimar da ke sama da pivot batu suna ɓoye motsin agogon hannu. Ƙimar da ke ƙasa da maƙallan pivot suna ɓoye motsin gaba da agogo. Domin misaliample, 41h(65) yayi daidai da mataki 1 a agogon agogo baya kuma 3Fh(63) yayi daidai da mataki 1 gaba da agogo.
Idan an kunna abubuwan taɓawa na ci gaba, ana aika Touch On azaman taron Canjin Sarrafa tare da ƙimar 127 akan Channel 15, yayin da aka aiko da taɓawa azaman taron Canjin Sarrafa tare da ƙimar 0 akan Channel 15. Domin ex.ampLe, tukunyar hagu mafi tsayi zai aika BEh 55h 7Fh don taɓawa, da BEh 55h 00h don Taɓa Kashe.
Yanayin Fader (Launchkey 49/61 kawai)
Faders, a cikin Yanayin Ƙara, suna ba da saitin Canje-canje masu zuwa akan Channel 16 (Matsayin MIDI: BFh, 191):
Idan an kunna abubuwan taɓawa na ci gaba, ana aika Touch On azaman taron Canjin Sarrafa tare da ƙimar 127 akan Channel 15, yayin da aka aiko da taɓawa azaman taron Canjin Sarrafa tare da ƙimar 0 akan Channel 15. Domin ex.ampLe, Fader na hagu zai aika BEh 05h 7Fh don taɓawa, da BEh 05h 00h don taɓawa.
Yin canza launi
Don duk sarrafawa banda yanayin Drum, bayanin kula, ko canjin sarrafawa wanda ya dace da waɗanda aka bayyana a cikin rahotanni ana iya aika su zuwa launi daidai LED (idan iko yana da wani) akan tashoshi masu zuwa:
- Tashar 1: Saita launi na tsaye.
- Tashar 2: Saita launi mai walƙiya.
- Tashar 3: Saita launi mai tauri.
Don yanayin Drum akan Pads, Da zarar DAW ya karɓi ikon yanayin [12], tashoshi masu zuwa suna aiki:
- Channel 10: Saita launi na tsaye.
- Tashar 11: Saita launi mai walƙiya.
- Tashar 12: Saita launi mai tauri.
An zaɓi launi daga palette mai launi ta hanyar bayanin kula Gudun taron ko ƙimar canjin sarrafawa. Monochrome LEDs na iya samun saitin haskensu ta amfani da CC akan tashar 4, lambar CC ita ce fihirisar LED, ƙimar ita ce haske. misali
- Hex: 93h 73h 7fh
- Disamba:147 115 127
Launi mai launi
Lokacin samar da launuka ta bayanin kula na MIDI ko canje-canjen sarrafawa, ana zaɓar launuka bisa ga tebur mai zuwa, ƙima:
Tebu iri ɗaya tare da alamar hexadecimal:
Launi mai walƙiya
Lokacin aika launi mai walƙiya, launi yana walƙiya tsakanin wannan saitin azaman a tsaye ko launi mai juzu'i (A), kuma wanda ke ƙunshe a cikin saitin taron MIDI yana walƙiya (B), a zagaye na 50%, yana aiki tare da agogon bugun MIDI (ko 120bpm ko agogon karshe idan ba a bayar da agogo ba). Lokaci guda yana da tsayin bugun daya.
Pulsing launi
Launi yana motsawa tsakanin duhu da cikakken ƙarfi, yana aiki tare da agogon bugun MIDI (ko 120bpm ko agogon ƙarshe idan ba a samar da agogo ba). Lokaci ɗaya yana da tsayin bugun biyu, ta amfani da sigar igiyar ruwa mai zuwa:
RGB launi
Hakanan ana iya saita maɓalli da maɓallan fader zuwa launi na al'ada ta amfani da SysEx Regular SKUs masu zuwa:
- Hex: F0h 00h 20h 29h 02h 13h 01h 43h F7h
- Dec: 240 0 32 41 2 19 1 67 247
Mini SKUs:
- Hex: F0h 00h 20h 29h 02h 13h 01h 43h F7h
- Disamba: 240 0 32 41 2 19 1 67 247
Sarrafa allon
Ra'ayoyi
- Nuni na tsaye: Nuni tsoho wanda ake nunawa sai dai idan kowane lamari yana buƙatar nuni daban don a nuna shi na ɗan lokaci.
- Nuni na wucin gadi: Nuni da wani lamari ya jawo, yana dagewa na tsawon saitin mai amfani da ya ƙare.
- Sunan sigar: Ana amfani da shi tare da haɗin gwiwa, yana nuna abin da yake sarrafawa. Sai dai idan an samar da saƙon (SysEx), yawanci wannan shine mahallin MIDI (kamar bayanin kula ko CC).
- Ƙimar siga: Ana amfani da shi tare da haɗin gwiwa, yana nuna ƙimar sa na yanzu. Sai dai in an bayar da shi ta hanyar saƙonni (SysEx), wannan shine ɗanyen ƙimar mahaɗan MIDI da ake sarrafawa (kamar lamba a cikin kewayon 0 - 127 idan akwai 7 rago CC).
Sanya nuni
SKUs na yau da kullun:
- Hex: F0h 00h 20h 29h 02h 14h 04h F7h
- Dec: 240 0 32 41 2 20 4 247
Mini SKUs:
- Hex: F0h 00h 20h 29h 02h 13h 04h F7h
- Disamba: 240 0 32 41 2 19 4 247
Da zarar an saita nuni don manufa da aka bayar, ana iya kunna shi.
Makasudi
- 00h - 1Fh: Temp. nuni don sarrafa Analogue (daidai da fihirisar CC, 05h-0Dh: Faders, 15h-1Ch: encoders)
- 20h: nunin tsaye
- 21h: Nuni na wucin gadi na duniya (ana iya amfani dashi ga duk wani abu da ba shi da alaƙa da sarrafawar Analogue)
- 22h: Yanayin DAW da aka nuna sunan (Fiel 0, komai: tsoho)
- 23h: DAW Drum pad yanayin da aka nuna sunan (Fiel 0, komai: tsoho)
- 24h: Sunan yanayin mahaɗar mahaɗa (Fiel 0, fanko: tsoho)
- 25h: Sunan da aka nuna yanayin encoder na plugin (Fiel 0, fanko: tsoho)
- 26h: Yana aika sunan da aka nuna yanayin yanayin (Fiel 0, komai: tsoho)
- 27h: Sunan da aka nuna na yanayin jigilar sufuri (Fiel 0, fanko: tsoho)
- 28h: Sunan da aka nuna yanayin fader girma (Fiel 0, komai: tsoho)
Saita
The byte yana saita tsari da aiki na nuni. 00h da 7Fh suna da ƙima na musamman: Yana soke (00h) ko kuma ya kawo (7Fh) nuni tare da abubuwan da ke cikin sa na yanzu (kamar yadda taron MIDI, ƙaramar hanya ce don kunna nuni).
- Bit 6: Bada maɓallin ƙaddamarwa don samar da Temp. Nuna ta atomatik akan Canji (tsoho: Saita).
- Bit 5: Bada maɓallin ƙaddamarwa don samar da Temp. Nuna ta atomatik akan taɓawa (tsoho: Saita; wannan shine Shift + juya).
- Bit 0-4: Tsarin nuni
Shirye-shiryen nuni:
- 0: Ƙimar musamman don soke nuni.
- 1-30: ID na tsari, duba tebur a ƙasa.
- 31: Ƙimar musamman don jawo nuni.
| ID | Bayani | Lambobi | Filaye | F0 | F1 | F2 |
| 1 | Layuka 2: Sunan Siga da Ƙimar Rubutu | A'a | 2 | Suna | Daraja | – |
| 2 | Layuka 3: Take, Sunan Sigar da Ƙimar Rubutu | A'a | 3 | Take | Suna | Daraja |
| 3 | Layi 1 + 2×4: Take da sunaye 8 (don ƙididdiga na ƙididdiga) | A'a | 9 | Take | Suna1 | … |
| 4 | Layuka 2: Sunan Siga da Ƙimar Sigar Lambobi (Tsoffin) | Ee | 1 | Suna | – | – |
NOTE
An yi watsi da tsarin don kawai saitin sunaye (22h (34) - 28h (40)), duk da haka, don canza ikon faɗakarwa, yana buƙatar saita shi ba sifili ba (tunda darajar 0 ga waɗannan har yanzu tana aiki don soke nunin) .
Saitin rubutu
Da zarar an daidaita nuni, ana iya amfani da saƙon da ke gaba don cike filayen rubutu.
SKUs na yau da kullun:
- Hex: F0h 00h 20h 29h 02h 14h 06h F7h
- Dec: 240 0 32 41 2 20 6 247
Mini SKUs:
- Hex: F0h 00h 20h 29h 02h 13h 06h F7h
- Disamba: 240 0 32 41 2 19 6 247
Rubutun yana amfani da daidaitaccen taswirar halayen ASCII a cikin kewayon 20h (32) - 7Eh (126) tare da ƙari na lambobin sarrafawa na ƙasa, waɗanda aka sake sanyawa don samar da ƙarin haruffa marasa ASCII.
- Akwatin Babu - 1 Bh (27)
- Akwatin Cika - 1C (28)
- Alamar Fita - 1Dh (29)
- Zuciya - 1 Eh (30)
Kada a yi amfani da wasu haruffa masu sarrafawa saboda halayensu na iya canzawa a nan gaba.
Bitmap
Hakanan allon yana iya nuna zane-zane na al'ada ta hanyar aika bitmap zuwa na'urar.
SKUs na yau da kullun:
- Hex: F0h 00h 20h 29h 02h 14h 09h 7 fh
- Disamba: 240 0 32 41 2 20 9 127
Mini SKUs:
- Hex: F0h 00h 20h 29h 02h 13h 09h 7 fh
- Disamba: 240 0 32 41 2 19 9 127
The na iya zama ko dai nunin tsayawa (20h(32)) ko nunin ɗan lokaci na duniya (21h(33)). Babu wani tasiri a kan sauran hari.
The yana da ƙayyadaddun bytes 1216, bytes 19 ga kowane jere na pixel, don jimlar layuka 64 (19 × 64 = 1216). Ragowar 7 na SysEx byte suna ɓoye pixels daga hagu zuwa dama (mafi girman bit daidai da pixel na hagu), bytes 19 wanda ke rufe faɗin pixels 128 na nuni (tare da rago biyar marasa amfani a cikin byte na ƙarshe).
Bayan nasara, akwai martani ga wannan saƙon, wanda ya dace da raye-rayen raye-raye na lokaci (da zarar an karɓa, Launchkey yana shirye don karɓar saƙon Bitmap na gaba):
SKUs na yau da kullun:
- Hex: F0h 00h 20h 29h 02h 14h 09h 7Fh
- Dec: 240 0 32 41 2 20 9 127
Mini SKUs:
- Hex: F0h 00h 20h 29h 02h 13h 09h 7Fh
- Disamba: 240 0 32 41 2 19 9 127
Ana iya soke nunin ta ko dai soke shi a bayyane (ta amfani da Configure Display SysEx ko MIDI Event), ko jawo nuni na al'ada (wanda aka adana sigoginsa yayin da bitmap ke nunawa).
NOTE
Firmware zai iya riƙe bitmap ɗaya kawai a cikin ƙwaƙwalwar ajiyarsa lokaci ɗaya.
Launchkey MK4 fasali controls
Yawancin fasalulluka na Launchkey za a iya sarrafa su ta hanyar saƙonnin MIDI CC da aka aika a tashar 7 kuma ana tambaya ta hanyar aika saƙo iri ɗaya zuwa tashar 8. Saƙon amsawa masu tabbatar da canje-canje ko amsa tambayoyin za a aika a tashar 7 koyaushe.
Don kunna ko kashe waɗannan sarrafawar a cikin keɓewa, yi amfani da saƙonnin da ke ƙasa.
Kunna sarrafa fasali:
- Hex: 9Fh 0Bh 7Fh
- Disamba: 159 11 127
Kashe abubuwan sarrafawa:
- Hex: 9Fh 0Bh 00h
- Disamba: 159 11 0
A cikin yanayin DAW, duk abubuwan sarrafawa suna sauraro, amma ba za su aika da amsar tabbatarwa ba sai kaɗan masu mahimmanci. A yanayin DAW, ana iya amfani da waɗannan saƙonnin da ke sama don kunna su gabaɗaya ko komawa zuwa saitin DAW.
| Lambar CC | Siffar | Nau'in sarrafawa |
| 02h: 22h | Arp Swing | 2's complement sun sanya hannu 14 bits
kashi daritage |
| 03h:23h | Ikon lokaci | |
| 04h: 24h | Arp Kau da tsarin kari | nibble-tsaga bitmask |
| 05h: 25h | Arp Ties | nibble-tsaga bitmask |
| 06h: 26h | Lafazin Arp | nibble-tsaga bitmask |
| 07h: 27h | Arp Ratchets | nibble-tsaga bitmask |
| 1Dh (#) | Zaɓi shimfidar pads | |
| 1 Eh (#) | Zaɓan shimfidar maɓalli | |
| 1Fh (#) | Zaɓi shimfidar Faders | |
| 3 Ch | Zaɓin halayen sikelin | |
| 3Dh (#) | Tonic sikelin (tushen bayanin kula) zaɓi | |
| 3 Eh (#) | Yanayin Sikeli (nau'in) zaɓi | |
| 3Fh (#) | Shift | |
| 44h ku | DAW 14-bits Analogue fitarwa | Kunna/Kashe |
| 45h ku | DAW Encoder Dangantakar fitarwa | Kunna/Kashe |
| 46h ku | DAW Fader Pickup | Kunna/Kashe |
| 47h ku | Abubuwan DAW Touch | Kunna/Kashe |
| 49h ku | Arp | Kunna/Kashe |
| 4 Ah | Yanayin sikelin | Kunna/Kashe |
| 4 Ch | Ƙaddamar da bayanin Ayyukan DAW (Lokacin Kunna, Bayanan kula na Maɓalli suna zuwa DAW) | Kunna/Kashe |
| 4Dh ku | Yankunan allo, yanayi | 0: Sashe na A, 1: Sashe na B, 2: Raba, 3: Layer |
| 4 EH | Yankunan allo, maɓallin raba | Bayanin MIDI akan tsoffin maɓalli na octave |
| 4Fh (*) | Yankunan allo, zaɓi haɗin Arp | 0: Sashe na A, 1: Sashe na B |
| 53h ku | DAW Drumrack launi mai aiki | |
| 54h ku | DAW Drumrack Kunnawa / Kashe (Lokacin Kashe, Drumrack ya kasance a cikin yanayin MIDI
yayin da yake cikin yanayin DAW) |
|
| 55h ku | Nau'in Arp (Up / Down da dai sauransu) | |
| 56h ku | Arp Rate (ciki har da Triplets) | |
| 57h ku | Arp Octave | |
| 58h ku | Arp Latch | Kunna/Kashe |
| 59h ku | Tsawon Ƙofar Arp | kashi daritage |
| 5 Ah | Ƙofar Arp mafi ƙarancin | millise seconds |
| 5 Ch | Arp Mutate | |
| 64h (*) | Tashar MIDI, Sashe na A (ko tashar MIDI ta Maɓalli don SKUs ba su da shi
madannai tsaga) |
0-15 |
| 65h (*) | Tashar MIDI, Sashe na B (Ana amfani dashi akan SKUs mai tsaga madannai) | 0-15 |
| 66h (*) | MIDI Channel, Chords | 0-15 |
| 67h (*) | Tashar MIDI, Ganguna | 0-15 |
| 68h (*) | Maɓalli saurin lanƙwasa / Kafaffen gudu zaɓi | |
| 69h (*) | Maɓallin saurin pads / Kafaffen gudu zaɓi |
Nau'in Sarrafa fasalin Lamba CC
| 6 ah(*) | Kafaffen ƙimar saurin gudu | |
| 6 Bh (*) | Gudun Arp (ko Arp ya kamata ya ɗauki gudu daga shigarwar bayanin sa ko amfani
tsayayyen gudu) |
|
| 6 Ch (*) | Nau'in bugun bayanta | |
| 6Dh (*) | Pad aftertouch ƙofa | |
| 6 Eh (*) | Fitowar agogon MIDI | Kunna/Kashe |
| 6Fh (*) | Matsayin haske na LED | (0 - 127 inda 0 ke min, 127 shine max) |
| 70h (*) | Matsayin hasken allo | (0 - 127 inda 0 ke min, 127 shine max) |
| 71h (*) | Lokacin nuni na ɗan lokaci | Raka'a 1/10 seconds, mafi ƙarancin 1 daƙiƙa a 0. |
| 72h (*) | Yanayin Vegas | Kunna/Kashe |
| 73h (*) | Jawabin Waje | Kunna/Kashe |
| 74h (*) | Pads ikon-kan tsoho yanayin zaɓi | |
| 75h (*) | Yanayin wutar lantarki na tukwane zaɓi | |
| 76h (*) | Faders ikon-kan tsoho yanayin zaɓi | |
| 77h (*) | Yanayin Fader na al'ada | 0: Tsalle, 1: Karɓa |
| 7 Ah | Saitin Kasadar Taswirar Chord | 1-5 |
| 7 Bh ku | Saitin Taswirar Chord | 1-8 |
| 7 Ch | Saitin Yada Taswirar Chord | 0-2 |
| 7Dh ku | Saitin Rubutun Taswirar Chord | 0-100 millise seconds |
Ikon nibble-ragawa yana amfani da mafi ƙarancin mahimmin nibble na ƙimar CC guda biyu don ƙirƙirar ƙimar 8-bit. Ƙimar CC ta farko ta zama mafi mahimmancin nibble.
- Siffofin da aka yiwa alama da (*) ba su da ƙarfi, suna dawwama a cikin kewayon wutar lantarki.
- Abubuwan da aka yiwa alama da (#) koyaushe ana kunna su cikin yanayin DAW.
Takardu / Albarkatu
 |
LAUNCHKEY MK4 MIDI Masu Kula da Allon madannai [pdf] Jagoran Jagora MK4 MIDI Masu Gudanar da Allon madannai, MK4, MIDI Masu Gudanar da Allon madannai, Masu Gudanar da Allon madannai, Masu Gudanarwa |
