IVIC1L-1616MAR-T Mai Kula da Dabarun Mai Shirye-shirye
Jagorar Mai Amfani
Shafin: V1.0 202212
IVIC1L-1616MAR-T Mai Kula da Dabarun Mai Shirye-shirye
Bayanan Bayani na gaggawa na IVC1L-1616MAR-T tare da 2PT PLC
Wannan jagorar farawa mai sauri shine don ba ku jagora mai sauri zuwa ƙira, shigarwa, haɗi da kiyaye IVC1L-1616MAR-T jerin PLC, dacewa don nuni akan shafin. An gabatar da shi a taƙaice a cikin wannan ɗan littafin ƙayyadaddun ƙayyadaddun kayan masarufi, fasali, da amfani da IVC1L-1616MAR-T PLC, da sassa na zaɓi da FAQ don bayanin ku. Don yin odar littattafan mai amfani na sama, tuntuɓi mai rarrabawa INVT ko ofishin tallace-tallace. Hakanan zaka iya ziyarta http://www.invt-control.com don zazzage bayanan fasaha masu alaƙa da PLC ko bayar da ra'ayi kan al'amurran da suka shafi PLC.
Gabatarwa
1.1 Zayyana Samfura
Ana nuna ƙirar ƙirar a cikin adadi mai zuwa. 
Zuwa ga Abokan ciniki: Na gode da zabar samfuranmu. Don inganta samfurin da samar da mafi kyawun sabis a gare ku, za ku iya cika fom bayan an sarrafa samfurin na wata 1, kuma ku aika wasiku ko fax zuwa Cibiyar Sabis na Abokin Ciniki? Za mu aiko muku da wani abin tunawa mai daɗi bayan karɓar cikakkiyar Form ɗin Sake Mai Kyau. Bugu da ƙari, idan za ku iya ba mu wasu shawarwari kan inganta samfur da ingancin sabis, za a ba ku kyauta ta musamman. Na gode sosai!
Shenzhen INVT Electric Co., Ltd.
Samfurin Bayanin Ingantaccen Samfur
| Sunan abokin ciniki | Waya | ||
| Adireshi | Gidan waya | Lambar | |
| Samfura | Ranar amfani | ||
| Mashin SN | |||
| Bayyanar ko tsari | |||
| Ayyuka | |||
| Kunshin | |||
| Kayan abu | |||
| Matsalar ingancin lokacin amfani | |||
| Shawara game da ingantawa | |||
Adireshi: INVT Ginin Fasaha na Guangming, Hanyar Songbai, Matian, Gundumar Guangming, Shenzhen, China Tel: +86 23535967
1.2 Shaci
Ana nuna jigon ainihin tsarin a cikin adadi mai zuwa ta ɗaukar tsohonampSaukewa: IVC1L-1616MAR-T.
PORTO da PORT1 PORT2 tashoshin sadarwa ne. PORTO yana amfani da yanayin RS232 tare da Mini DIN8 soket. PORT1 da PORT2 suna da RS485 sau biyu. Socket ɗin busbar shine don haɗa tsarin haɓakawa. Yanayin zaɓin zaɓi yana da matsayi uku: ON, TM da KASHE.
1.3 Gabatarwar Tasha
1. Ana nuna shimfidu na tashoshi kamar haka: Tashoshin shigarwa: 
Tebur na ma'anar shigarwar tasha
| A'a. | Alama | Bayani | A'a. | Alama | Bayani |
| 1 | S/S | Wurin shigar da tushen shigarwa/yanayin nutsewa tasha | 14 | X1 | Tashar shigar da siginar dijital X1 |
| 2 | XO | Tashar shigar da siginar dijital XO | 1 c zan" | n ‘ |
Tashar shigar da siginar dijital X3 |
| 3 | X2 | Tashar shigar da siginar dijital X2 | 16 | c X' |
Tashar shigar da siginar dijital X5 |
| 4 | X4 | Tashar shigar da siginar dijital X4 | 17 '' |
y7 ” |
Tashar shigar da siginar dijital X7 |
| 5 | X6 | Tashar shigar da siginar dijital X6 | 18 | X11 | Tashar shigar da siginar dijital X11 |
| 6 | X10 | Tashar shigar da siginar dijital X10 | 19 | X13 | Tashar shigar da siginar dijital X13 |
| 7 | X12 | Tashar shigar da siginar dijital X12 | 20 | X15 | Tashar shigar da siginar dijital X15 |
| 8 | X14 | Tashar shigar da siginar dijital X14 | 21 | X17 | Tashar shigar da siginar dijital X17 |
| 9 | X16 | Tashar shigar da siginar dijital X16 | 22 | FG | RTD na USB garkuwa ƙasa |
| 10 | 11 | Ingantacciyar hanyar taimako ta RTD na CH1 | 23 | R1+ | Kyakkyawan thermal-resistor sisnal iniut na CH1 |
| 11 | 11 | Korau RTD karin halin yanzu na CH1 | 24 | R1 | Mara kyau thermal-resistor sisnal ineut na CH1 |
| 12 | 12+ | Ingantacciyar hanyar taimako ta RTD na CH2 | 25 | R2+ | Kyakkyawan thermal-resistor sisnal iniut na CH2 |
| 13 | 12- | Korau RTD karin halin yanzu na CH2 | 26 | R2- | Ingantacciyar shigar da siginar thermal-resistor na CH2 |
Tashoshin fitarwa: 
| A'a. | Alama | Bayani | A'a. | Alama | Bayani |
| 1 | +24 | Madaidaicin sandar wutar lantarki na fitarwa 24V | 14 | COM | Korau mara kyau na samar da wutar lantarki 24V |
| 2 | YO | Sarrafa tashar fitarwa | 15 | COMO | Sarrafa fitarwa gama gari |
| 3 | Y1 | Sarrafa tashar fitarwa | 16 | Babu komai | |
| 4 | Y2 | Sarrafa tashar fitarwa | 17 | COM1 | Common tasha na sarrafawa fitarwa tasha |
| 5 | Y3 | Sarrafa tashar fitarwa | 18 | COM2 | Common tasha na sarrafawa fitarwa tasha |
| 6 | Y4 | Sarrafa tashar fitarwa | 19 | Y5 | Sarrafa tashar fitarwa |
| 7 | Y6 | Sarrafa tashar fitarwa | 20 | Y7 | Sarrafa tashar fitarwa |
| 8 | • | Babu komai | 21 | COM3 | Common tasha na sarrafawa fitarwa tasha |
| 9 | Y10 | Sarrafa tashar fitarwa | 22 | Yll | Sarrafa tashar fitarwa |
| 10 | Y12 | Sarrafa tashar fitarwa | 23 | Y13 | Sarrafa tashar fitarwa |
| 11 | Y14 | Sarrafa tashar fitarwa | 24 | Y15 | Sarrafa tashar fitarwa |
| 12 | Y16 | Sarrafa tashar fitarwa | 25 | Y17 | Sarrafa tashar fitarwa |
| 13 | • | Babu komai | 26 | • | Babu komai |
Ƙimar wutar lantarki
An jera ƙayyadaddun ƙayyadaddun ƙarfi na PLC da aka gina a ciki da wutar lantarki don ƙirar haɓakawa a cikin tebur mai zuwa.
| Abu | Naúrar | Min. | Valueimar al'ada | Max. | Lura | |
| Wutar lantarki voltage | Vac | 85 | 220 | 264 | Farawa na al'ada da aiki | |
| Shigar da halin yanzu | A | / | / | 2. | Shigarwa: 90Vac, 100% fitarwa | |
| Ƙididdigar fitarwa na halin yanzu | 5V/GND | mA | / | 900 | / | Jimlar ƙarfin abubuwan da aka fitar 5V/GND da 24V/GND 10.4W. Max. ikon fitarwa: 24.8W ( jimlar duk rassan) |
| 24V/GND | mA | / | 300 | / | ||
| + -15V/AGND | mA | / | 200 | |||
| 24V/COM | mA | / | 600 | / | ||
Abubuwan Shiga na Dijital & Fitarwa
3.1 Halayen shigarwa da Ƙayyadaddun bayanai
Ana nuna halayen shigarwa da ƙayyadaddun bayanai kamar haka:
| Abu | Matsakaicin shigar da sauri X0-X7 | Gaba ɗaya tashar shigarwa | |
| Yanayin shigarwa | Yanayin tushe ko yanayin nutsewa, saita ta tashar s/s | ||
| Sigar lantarki | Shigar da kunditage | 24Vdc | |
| Juriya na shigarwa | 4k0 ku | 4.3k0 ku | |
| Shigarwa ON | Juriya na kewayen waje <4000 | Juriya na kewayen waje <4000 | |
| KASHE shigarwar | Juriya na waje> 24k0 | Juriya na waje> 24k0 | |
| Aikin tacewa | Tace ta dijital | X0-X7 suna da lokacin fi na dijital: 0, 8, 16, 32 ko 64ms shirin) | tering aiki. Tace (wanda aka zaba ta mai amfani |
| Hardware tace | Tashoshin shigarwa banda X0-X7 na tace kayan aiki ne. Lokacin tacewa: kusan 10ms | ||
| Babban aiki mai sauri | X0—X7: ƙidayar sauri, katsewa, da kama bugun bugun jini XO da X1: har zuwa mitar ƙidayar 50kHz X2—X5: har zuwa mitar ƙidayar 10kHz Adadin mitar shigarwa yakamata ya zama ƙasa da 60kHz |
||
| Tashar gama gari | Tasha gama gari ɗaya kawai: COM | ||
Matsakaicin shigarwa yana aiki azaman counter yana da iyaka akan matsakaicin mitar. Duk wani mita sama da hakan na iya haifar da ƙidayar da ba daidai ba ko aiki mara kyau. Tabbatar cewa tsarin shigarwar tasha yana da ma'ana kuma na'urorin firikwensin waje da aka yi amfani da su sun dace.
PLC tana ba da tashar S/S don zaɓar yanayin shigar da sigina tsakanin yanayin tushe da yanayin nutsewa. Haɗa tashar S/S zuwa tashar +24, watau saita yanayin shigarwa zuwa yanayin nutsewa, yana ba da damar haɗi tare da firikwensin NPN. 
Haɗin shigarwa example
Zane mai zuwa yana nuna tsohonample na IVC1L-1616MAR-T dangane da IVC1-0808ENR, wanda ke gane sauƙin sakawa iko. Sigina na sakawa daga PG ana shigar da su ta hanyar ƙidayar ƙidayar sauri XO da X1, siginar ƙayyadaddun ƙayyadaddun siginar da ke buƙatar amsa mai sauri za a iya shigar da su ta tashoshi masu sauri X2-X7. Sauran siginar mai amfani za a iya shigar da su ta kowace tashar shigarwa. 
3.2 Halayen Fitarwa da Ƙayyadaddun Bayanai
Ana nuna ƙayyadaddun bayanan lantarki na abubuwan fitarwa a cikin tebur mai zuwa.
| Abu | fitarwa fitarwa | |
| Jujjuyawar juzu'itage | Kasa da 250Vac, 30Vdc | |
| Warewa kewaye | By Relay | |
| Alamar aiki | An rufe lambobi masu fitarwa, LED a kunne | |
| Yayyo halin yanzu na bude da'ira | / | |
| Mafi ƙarancin kaya | 2mA/5Vdc | |
| Max. fitarwa halin yanzu | lodi mai juriya | maki 2A/1; maki 8A/4, ta amfani da COM maki 8A/8, ta amfani da COM |
| Nauyin inductive | 220VAC, 80VAC | |
| Nauyin haske | 220Vac, 100W | |
| Lokacin amsawa | KASHE—› ON | 20ms Max |
| ON-* KASHE | 20ms Max | |
| Y0, Y1 max. fitarwa mita | / | |
| Y2, Y3 max. fitarwa mita | / | |
| Fitar gama gari | YO/ Y1-COMO; Y2/Y3-COM1. Bayan Y4, Max 8 tashoshi suna amfani da keɓantaccen tasha na gama gari | |
| Fuse kariya | Babu | |
Haɗin fitarwa example
Zane mai zuwa yana nuna tsohonampna IVC1L-1616MAR-T dangane da IVC1-0808ENR. Wasu (kamar Y0-COMO) ana haɗa su zuwa 24Vdc da'ira ta gida 24V-COM, wasu (kamar Y2-COM1) ana haɗa su zuwa 5Vdc low vol.tage siginar da'ira, da sauransu (kamar Y4-Y7) an haɗa su zuwa 220Vac voltage sigina kewaye. Ƙungiyoyin fitarwa daban-daban za a iya haɗa su zuwa nau'ikan sigina daban-daban tare da nau'i daban-dabantage.
3.3 Halayen Thermistor da Bayani
Musammantawa
| Abu | Ƙayyadaddun bayanai | |||
| Digiri Celsius (°C) | Ina Digiri Fahrenheit (°F) ' | |||
| Siginar shigarwa. | Nau'in Termistor: Pt100, Cu100, Cu50 Yawan tashoshi: 2 | |||
| Saurin juyawa | (15± 2%) ms x 4 tashoshi (Ba a yin canjin don tashoshi marasa amfani.) | |||
| Ƙimar zafin jiki | Pt100 | -150°C—+600°C | Pt100 | -238°F—+1112°F |
| Ku100 | -30°C—+120°C | Ku100 | -22°F—+248°F | |
| Ku50 | -30°C—+120°C | Ku50 | -22°F—+248°F | |
| Fitowar dijital | Ana adana ƙimar zafin jiki a cikin lambar kari na binary 16-bit. | |||
| Pt100 | -1500-+6000 | Pt100 | -2380-+11120 | |
| Ku100 | -300-+1200 | Ku100 | -220-+2480 | |
| Ku50 | -300-+1200 | Ku50 | -220-+2480 | |
| Abu | Ƙayyadaddun bayanai | |||
| Digiri Celsius (°C) | Digiri Fahrenheit (°F) | |||
| Mafi ƙasƙanci ƙuduri |
Pt100 | 0.2°C | Pt100 | 0.36°F |
| Ku100 | 0.2°C | Ku100 | 0.36°F | |
| Ku50 | 0.2°C | Ku50 | 0.36°F | |
| Daidaitawa | ± 1% na cikakken kewayon | |||
| Kaɗaici | Ana keɓe da'irori na Analog daga da'irori na dijital ta amfani da su photoelectric ma'aurata. Tashoshin analog ɗin ba su keɓe ba daga juna. |
|||
Hoton da ke gaba yana nuna wayoyi ta ƙarshe: 
Alamun 0 zuwa 0 a cikin wannan adadi na sama suna nuna haɗin da kuke buƙatar kulawa ta musamman.
- Ana ba da shawarar cewa ka haɗa siginonin thermistor ta amfani da kebul na murɗaɗɗen garkuwa, kuma ka kiyaye kebul ɗin daga igiyoyin wutar lantarki ko wasu igiyoyi waɗanda zasu iya haifar da kutsawar wutar lantarki. An bayyana haɗin thermistor kamar haka:
Don firikwensin thermistor na nau'ikan Pt100, Cu100, da Cu50, zaku iya amfani da hanyoyin haɗin waya 2, 3-waya, da 4-waya. Daga cikin su, madaidaicin hanyar haɗin waya 4 shine mafi girma, na hanyar haɗin waya 3 shine mafi girma na biyu, kuma na hanyar haɗin waya 2 shine mafi ƙanƙanta. Idan tsawon waya ya fi mita 10, ana ba da shawarar cewa kayi amfani da hanyar haɗin waya 4 don kawar da kuskuren juriya da wayar ta haifar.
Don rage kurakuran ma'auni da hana tsangwama a cikin hayaniya, ana ba da shawarar ku yi amfani da igiyoyin haɗi waɗanda suka fi guntu m 100. - Idan an haifar da tsangwama na lantarki da yawa, haɗa ƙasa mai kariya zuwa PG na ƙasa na module.
- Ƙaddamar da ƙasa ta PG na module yadda ya kamata.
- Yi amfani da wutar lantarki 220Vac. O. Takaitaccen zagayawa tashoshi masu kyau da mara kyau waɗanda basa amfani da tashar don hana gano bayanan kuskure akan tashar.
Tsarin naúrar SD
| Adireshin No. | Suna | Farashin RIW | Lura |
| SD172 | SampFarashin CH1 | R | Tsoffin ƙimar: 0 |
| SD173 | SampRahoton da aka ƙayyade na CH1 | RW | 1-1000, Ƙimar ta asali: 8 |
| SD174 | SampFarashin CH2 | R | Tsoffin ƙimar: 0 |
| SD175 | SampRahoton da aka ƙayyade na CH2 | RW | 1-1000, Ƙimar ta asali: 8 |
| SD178 | Zaɓin yanayi don CH1 (8 LSBs) Zaɓin yanayin don CH2 (8 MSBs) |
RW | 0: Kashe 1: PT100 (-1500-6000, digiri Celsius) 2: PT100 (-2380-11120, digiri Fahrenheit) 3:Cu100 (-300-1200, digiri Celsius) 4:Cu100 (-220-2480, digiri Fahrenheit) 5:Cu50 (-300-1200, digiri Celsius) 6:Cu50 (-220-2480, digiri Fahrenheit) |
Saitin exampda:
Domin saita PT100 don duka CH1 da CH2, fitar da ƙimar a cikin digiri Celsius, kuma saita maki matsakaicin darajar zuwa 4, kuna buƙatar saita 8 leaset mahimman raƙuman ruwa (LSBs) na SD178 zuwa Ox01 da 8 mafi mahimmancin ragowa (MSBs) na SD178 zuwa Ox01, watau saita Ox178de (SD0101). Sannan saita SD173 da SD175 zuwa 4. Ma'aunin SD172 da SD174 sune matsakaicin yanayin zafi a ma'aunin Celsius na s huɗu.amplings gano ta CH1 PT100 da CH2 PT100, bi da bi.
Tashar Sadarwa
IVC1L-1616MAR-T asali module yana da serial asynchronous sadarwa tashar jiragen ruwa: PORTO, PORT1, da PORT2. Adadin baud masu goyan baya: 115200, 57600, 38400, 19200, 9600, 4800, 2400, 1200bps. Canjin zaɓin yanayin yana ƙayyade ƙa'idar sadarwar PORTO.
| Fil A'a | Suna | Bayani |
| 3 | GND | Kasa |
| 4 | RXD | Serial data karba fil (daga RS232 zuwa PLC) |
| 5 | TX D | Serial data watsa fil (daga PLC zuwa RS 232) |
| 1, 2, 6, 7,8 | Wuraren ajiya | Fitin da ba a bayyana ba, bar shi a dakatar |
A matsayin tasha da aka keɓe don shirye-shiryen mai amfani, PORTO za a iya canza shi zuwa ƙa'idar shirye-shirye ta hanyar sauya yanayin zaɓi. Ana nuna alaƙa tsakanin matsayin aiki na PLC da ka'idar da PORTO ke amfani da shi a cikin tebur mai zuwa.
| Matsayin zaɓin zaɓi | Matsayi | PORTO tsarin aiki |
| ON- | Gudu | Protocol na shirye-shirye, ko Modbus Protocol, ko ka'idar tashar jiragen ruwa kyauta, ko yarjejeniyar hanyar sadarwa N: N, kamar yadda tsarin mai amfani da tsarin tsarin ya ƙaddara. |
| ON→TM | Gudu | Juya zuwa ka'idar shirye-shirye |
| KASHE →TM | Tsaya | |
| KASHE | Tsaya | Idan tsarin tsarin tsarin mai amfani shine ka'idar tashar tashar jiragen ruwa ta kyauta, yana canzawa zuwa shirye-shirye yarjejeniya ta atomatik bayan tsayawa; ko tsarin tsarin yana ci gaba da canzawa |
PORT1. PORT2 sun dace don haɗi tare da kayan aiki waɗanda zasu iya sadarwa (kamar inverters). Tare da ka'idar Modbus ko RS485 ƙa'idar kyauta ta tashar, tana iya sarrafa na'urori da yawa ta hanyar sadarwar. An gyara tashoshinsa tare da sukurori. Zaka iya amfani da garkuwar murɗaɗɗen-biyu azaman kebul na sigina don haɗa tashoshin sadarwa da kanka.
Shigarwa
PLC ana amfani da shi zuwa nau'in shigarwa na II, digiri na 2 na gurɓatawa.
5.1 Girman Shigarwa
| Samfura | Tsawon | Nisa | Tsayi | Cikakken nauyi |
| Saukewa: IVCAL-1616MAR-T | 182mm ku | 90mm ku | 71.2mm ku | 750 g |
5.2 Hanyar Shigarwa
DIN dogo shigarwa
Gabaɗaya zaka iya shigar da PLC akan layin dogo mai faɗin 35mm (DIN), kamar yadda aka nuna a cikin adadi mai zuwa. 
Cikakken tsari shine kamar haka:
- Gyara layin dogo na DIN akan jirgin baya na shigarwa;
- Fitar da shirin dogo na DIN daga kasan tsarin;
- Dutsen module zuwa DIN.
- Latsa baya shirin dogo na DIN don kulle tsarin.
- Gyara ɓangarorin biyu na ƙirar tare da tsayawar dogo don guje wa zamewa.
Ana iya amfani da wannan hanya don shigar da dogo na DIN don duk sauran IVC1L-1616MAR-T PLCs.
Gyaran dunƙulewa
Gyara PLC tare da sukurori na iya tsayawa firgita fiye da hawan dogo na DIN.
Yi amfani da sukurori na M3 ta cikin ramukan hawa akan shingen PLC don gyara PLC akan allon baya na majalisar lantarki, kamar yadda aka nuna a adadi mai zuwa. 
5.3 Haɗin Kebul da Ƙididdiga
Haɗa kebul na wuta da kebul na ƙasa. Muna ba ku shawarar yin waya da kewayen kariya a tashar shigar da wutar lantarki. Hoton da ke gaba yana nuna haɗin haɗin AC da kayan wutar lantarki.
Ana iya inganta ƙarfin tsoma baki na PLC ta hanyar daidaita igiyoyin ƙasa masu dogaro. Lokacin shigar da PLC, haɗa tashar samar da wutar lantarki 
zuwa kasa. Ana ba da shawarar cewa kayi amfani da wayoyi masu haɗawa na AWG12 zuwa AWG16 kuma kayi ƙoƙarin rage wayoyi, sannan ka saita ƙasa mai zaman kanta da kiyaye igiyoyin ƙasa daga na wasu na'urori (musamman waɗanda ke haifar da tsangwama mai ƙarfi), kamar yadda aka nuna a cikin adadi mai zuwa.
Bayanin kebul
Lokacin yin waya da PLC, yi amfani da waya ta jan ƙarfe mai nau'i-nau'i da yawa da madaidaitan tashoshi don tabbatar da inganci. Ana nuna samfurin da aka ba da shawarar da yanki na kebul na kebul a cikin tebur mai zuwa.
| Kebul | Tsare-tsare yanki |
Nasiha abin koyi |
Cable lug da bututu mai zafi |
| Wutar wutar lantarki ta AC (L, N) | 1.0-2.0mm2 | AWG12, 18 | H1.5/14 zagaye mai rufi lug, ko tinned na USB lug |
| Kebul na Duniya (e) | 2.0mm2 ku | Saukewa: AWG12 | H2.0114 zagaye mai rufi lug, ko tinned na USB lug |
| Kebul na siginar shigarwa (X) | 0.8-1.0mm2 | AWG18, 20 | UT1-3 ko OT1-3 solderless lug 1) 3 ko c1314 zafi shrinkable tube |
| Kebul na siginar fitarwa (Y) | 0.8-1.0mm2 | AWG18, 20 |
Gyara shugaban kebul ɗin da aka shirya akan tashoshin PLC tare da sukurori. karfin juyi: 0.5-0.8Nm.
Ana nuna hanyar sarrafa kebul da aka ba da shawarar a cikin adadi mai zuwa.
Aiki-Aiki da Kulawa
6.1 Farawa
Duba haɗin kebul a hankali. Tabbatar cewa PLC ya fita daga baƙon abubuwa kuma tashar watsar da zafi a bayyane take.
- Wuta akan PLC, alamar PLC POWER ya kamata a kunna.
- Fara software na AutoStation akan mai watsa shiri kuma zazzage shirin mai amfani da aka haɗa zuwa PLC.
- Bayan duba shirin zazzagewa, canza yanayin zaɓin yanayin zuwa matsayin ON, alamar RUN yakamata ya kasance a kunne. Idan alamar ERR tana kunne, shirin mai amfani ko tsarin ba daidai ba ne. Saka cikin jerin IVC PLC Programming Manual kuma cire kuskuren.
- Ƙarfi akan tsarin waje na PLC don fara gyara tsarin.
6.2 Kulawa na yau da kullun
Yi abubuwa masu zuwa:
- Tabbatar da PLC tsabtataccen muhalli. Kare shi daga baki da kura.
- Ajiye iskar iska da zafi na PLC cikin yanayi mai kyau.
- Tabbatar cewa haɗin kebul ɗin abin dogaro ne kuma yana cikin yanayi mai kyau.
Gargadi
- Yi amfani da lambobin sadarwa na relay kawai idan ya cancanta, saboda tsawon rayuwar
Sanarwa
- An keɓe kewayon garanti ga PLC kawai.
- Lokacin garanti shine watanni 18, a cikin lokacin INVT ke gudanar da kulawa kyauta da gyara ga PLC wanda ke da wani laifi ko lalacewa a ƙarƙashin yanayin aiki na yau da kullun.
- Lokacin farawa na lokacin garanti shine ranar isar da samfur, wanda samfurin SN shine kawai tushen hukunci. PLC ba tare da samfur SN ba za a yi la'akari da baya garanti.
- Ko da a cikin watanni 18, za a kuma cajin kulawa a cikin yanayi masu zuwa:
Lalacewar da aka samu ga PLC saboda rashin aiki, waɗanda ba su dace da littafin Mai amfani ba;
Lalacewar da aka samu ga PLC saboda gobara, ambaliya, voltage, da sauransu;
Lalacewar da aka samu ga PLC saboda rashin amfani da ayyukan PLC da bai dace ba. - Za a caje kuɗin sabis bisa ga ainihin farashin. Idan akwai wani kwangila, kwangilar ta yi nasara.
- Da fatan za a ajiye wannan takarda kuma ku nuna wannan takarda ga sashin kulawa lokacin da samfurin ke buƙatar gyarawa.
- Idan kuna da kowace tambaya, tuntuɓi mai rarrabawa ko kamfaninmu kai tsaye.
Shenzhen INVT Electric Co., Ltd.
Adireshi: INVT Ginin Fasaha na Guangming, Hanyar Songbai, Matian,
Gundumar Guangming, Shenzhen, China
Website: www.invt.com
An kiyaye duk haƙƙoƙi. Abubuwan da ke cikin wannan takaddar ana iya canzawa ba tare da sanarwa ba.
Takardu / Albarkatu
 |
INVT IVIC1L-1616MAR-T Mai Kula da Dabarun Mai Shirye-shirye [pdf] Jagorar mai amfani IVIC1L-1616MAR-T Mai Kula da Ma'ana Mai Ma'ana, IVIC1L-1616MAR-T |
