tushen duniya 1932 3-SPEED RECORD PLAYER TUNRTABLE

Fitilar walƙiya tare da kibiya, a cikin kusurwar madaidaiciya, an yi niyyar faɗakar da mai amfani game da kasancewar “vol mai haɗari”tage” a cikin ƙulli na samfurin wanda zai iya zama isashen girma don zama haɗarin girgizar lantarki ga mutane. GARGADI - DOMIN RAGE HADAR WUTA KO HUKUNCIN LANTARKI, KAR KA BAYYANA WANNAN KAYAN NA RUWAN RUWAN KWANA KO DANSHI.

AVIS Abubuwan da aka bayar na RISQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR

BABU BANGASKIYA MAI AMFANI A CIKIN. NUNA HIDIMAR ZUWA

Ma'anar faɗa a cikin madaidaicin alwatika an yi niyya don faɗakar da mai amfani game da kasancewar mahimman umarnin aiki da kulawa (sabis) a cikin wallafe-wallafe Don hana girgizar wutar lantarki, donotremove murfin ko baya. Babu sassan da za a iya amfani da su a ciki.

MUHIMMAN UMURNIN TSIRA!

KA KARANTA SU KAFIN AIKI DA WANNAN KAYAN

1. Karanta waɗannan umarnin.
2. A kiyaye waɗannan umarnin.
3. Ku kula da duk gargaɗin.
4. Bi duk umarnin.
5. Kar a yi amfani da wannan na'urar kusa da ruwa.
6. Tsaftace kawai da bushe bushe.
7. Kar a toshe kowane buɗewar samun iska. Shigar daidai da umarnin masana'anta.
8. Kada a shigar kusa da kowane tushen zafi kamar radiators, rajistan zafi, murhu ko wasu na'urori (ciki har da amplifiers) masu samar da zafi.
9. Kare igiyar wutar lantarki daga tafiya a kai ko a danne su musamman a matosai, madaidaitan ma'auni, da wurin da suke fita daga na'urar.
10. Yi amfani da haɗe-haɗe/kayan haɗe-haɗe kawai wanda mai ƙira ya ƙayyade.
11. Cire wannan na'urar a lokacin hadari na walƙiya ko lokacin da ba a amfani da shi na dogon lokaci.
12. Koma duk hidima ga ƙwararrun ma'aikatan sabis. Ana buƙatar sabis lokacin da na'urar ta lalace ta kowace hanya, kamar igiyar wutar lantarki ko filogi ta lalace, ruwa ya zube ko abubuwa sun fada cikin na'urar, na'urar ta gamu da ruwan sama ko danshi, ba ta aiki yadda ya kamata ko an jefar da shi.
13. Kada a bijirar da wannan na'ura mai yawo ko fantsama kuma tabbatar da cewa babu wani abu da aka cika da ruwa, kamar vases, akan kayan aikin.
    GARGADI: Yi amfani da wannan samfurin kawai tare da Adaftar Wutar Lantarki da aka bayar.Rashin yin hakan na iya haifar da girgiza wuta da wuta.
14. Don cire haɗin wannan kayan gabaɗaya daga ac mains, cire haɗin AC/DCadapter daga ma'ajin.
15. Babban filogi na igiyoyin wutar lantarki za su kasance cikin sauƙin aiki. Idan an samar da AC/DCadapter tare da abin da aka makala na igiyar wutar lantarki, tologin wannan igiyar samar da wutar zata ci gaba da aiki da sauri.
16. Haɗa tashar wutar lantarki ta hanyar igiyar wutar lantarkicordonlytoa mains soket tare da haɗin ƙasa mai karewa.

Sarrafa DA AIKI

1. Platter mai juyayi
2. Adaftar rikodin 45RPM
3. Tonearm mai nauyin nauyi
4. Mai riƙe da hannu
5. Onearamar hannu
6. Maɓallin kunnawa/kashewa ta atomatik
7. 33/45/78 RPM mai zaɓin saurin gudu
8. Hasken phono/Bluetooth mai nuna alama
9. Canja wutar lantarki / Ikon ƙarar / ikon Bluetooth
10. Harsashi
11. Masu magana da sitiriyo
12. Jakin adaftan wutar lantarki na waje
13. Jakin layi na layi (hagu/dama)
14. Jakin magana (hagu/dama)

HUKUNCIN AIKI

CUTAR DA TUNAWA

1. Cire naúrar a hankali daga cikin kunshin sa kuma fitar da shi daga cikin jakar filastik.
2. Cire murfin harsashi na gaskiya ta hanyar ja a hankali zuwa gaban naúrar.
   

HADA DA TUNTTABLE

Gano wuri kuma cire counterweight na tonearm daga marufi. Mayar da ƙima mai ƙima zuwa ga baya na
Sautin hannu Tura shi har sai ya wuce faifan ƙarfe a kan tonearm ɗin kuma zai dunƙule kan gefen baya na tonearm.

HANYA

1. Haɗa akwatin lasifikar hagu da dama zuwa jacks lasifika na hagu da dama.
2. Haɗa adaftar wutar lantarki zuwa naúrar sannan ka toshe adaftan cikin babban soket.

AIKI MAI JUYA

※ Kunna naúrar ta hanyar kunna POWER SWITCH (9) dake jikin gaban panel.
※ Lokacin daɗa hannun sautin zuwa rikodin, yana canzawa ta atomatik zuwa Yanayin Phono. Hasken alamar phono zai juya zuwa ja.

1. Saita SPEED SELECTOR (7) zuwa saurin da ake so (33 1/3, 45 ko 78 rpm). Sanya rikodin akan farantin. Don rikodin RPM 45, sanya adaftan45RPM akan igiya ta tsakiya kafin sanya rikodin akan platter.
2. Cire abin da aka nannade akan tonearm kuma buɗe shi. A hankali matsar da sautin hannu zuwa wurin da ake so akan rikodin.
3. Daidaita sarrafa VOLUME (9) zuwa matakin da ake so.
4. A ƙarshen rikodin, hannun sautin zai tsaya kai tsaye ta tsakiya kuma naúrar zata canza zuwa Yanayin Bluetooth. Ɗaga sautin hannu daga rikodin kuma mayar da shi zuwa sauran.
5. Don tsayawa da hannu, a hankali ɗaga hannun sautin daga rikodin kuma mayar da shi zuwa sauran.
6. Idan rikodin ya daina motsi lokacin kunnawa, kuna buƙatar kashe maɓallin tsayawa ta atomatik. Maballin yana ƙarƙashin tonearm.

AIKIN BLUETOOTH

1. Kunna kullin wutar lantarki. Yanayin tsoho shine Yanayin Bluetooth. Hasken shuɗin shuɗi zai yi walƙiya, yana nuna cewa naúrar a shirye take don haɗawa da na'urorin ku masu kunna Bluetooth. Lokacin daɗa hannun sautin akan rikodin, yana canzawa ta atomatik zuwa Yanayin Phono.
2. Kunna aikin Bluetooth akan wayar hannu ko kwamfutar hannu PC kuma bincika sunan na'urar Pi. Bayan haɗawa da haɗawa, hasken blueindicator zai daina walƙiya, zaku iya kunna kiɗan ku daga wayar hannu ko kwamfutar hannu ta wannan na'urar kunnawa.
3. Juya ƙwanƙolin KYAUTA don daidaita ƙarar. Ikon ƙarar wayar hannu ko kwamfutar hannu kuma yana haifar da ƙimar ƙarar gabaɗaya. Da fatan za a daidaita hakan kuma idan ya cancanta.

LAYIN FITAR JAKABA

Ana iya haɗa wannan tsarin tare da na'urorin waje (misali amplifiers da masu magana) ta LINE-OUT jacks a bayan naúrar.

Matsalar harbi

Turntable yana aiki amma baya fitar da sauti ko rashin isasshen sauti.

1. Murfin kariyar harsashi yana nan a wurin. Cire murfin kariyar harsashi.
2. Ba a haɗa masu magana da na'urar kunnawa. Saka igiyoyin lasifikan da ƙarfi a cikin tashar da ke bayan abin juyawa.
3. Stylus ya karye ko ya ɓace. Bincika taron stylus kuma maye gurbin idan ya cancanta.
4. Ƙila taron stylus ɗin ba zai zama cikakken zama a jikin harsashi ba. Bincika harsashi kuma daidaita idan ya cancanta

Turntable yana aiki amma stylus ya “tsalle” cikin rikodin rikodi

1. Murfin kariyar harsashi yana nan a wurin. Cire murfin kariyar harsashi.
2. An saita ƙarfin bin diddigin haske sosai. Saita ƙarfin bin diddigi ta daidaita matsayin ƙima.
3. An saita ƙarfin bin diddigin nauyi da yawa (taron stylus yana ƙasa akan rikodin). Saita ƙarfin bin diddigi ta daidaita matsayin ƙima
4. Turntable yana ɗaukar firgita fiye da kima daga bene, bango, ko lasifika na kusa. Rage jijjiga ko sanya jujjuyawar a kan m / m surface.

Yi rikodin sauti da sauri ko a hankali

An saita turntable don saurin kuskure. Yi zaɓin saurin da ya dace don nau'in rikodin da ake kunna tare da maɓallan saurin platter.

NASIHA DOMIN INGANTACCEN YI

• Kada ku taɓa titin mai salo da yatsun ku; kauce wa cin karo da salo akan tabarma mai juyawa ko rikodi.
• Tsaftace titin mai salo akai-akai, ta amfani da goga mai laushi da motsi na baya1 zuwa gaba.
• Idan kuna amfani da ruwa mai tsaftacewa, yi amfani da shi a hankali.
• Shafa murfin ƙura da mahalli mai juyawa a hankali tare da zane mai laushi. Yi amfani da ɗan ƙaramin bayani mai laushi don tsaftacewa
• Kada a taɓa amfani da sinadarai masu tsauri ko kaushi zuwa kowane ɓangare na tsarin juyawa.
• Kafin matsar da turntable, koyaushe cire shi daga AC

BAYANI

Tushen wutan lantarki	DC12V/2A
Fitar wutar lantarki	10 Watts X 2 Rms
Bluetooth	Kewayon mitar: 2.402GHz - 2.480GHz Mai watsawa: 4dBm
Adafta	Abun shigarwa: AC 100V ~ 240V 50/60Hz Fitarwa: DC 12V 2A

Takardu / Albarkatu

tushen duniya 1932 3-SPEED RECORD PLAYER TUNRTABLE [pdf] Manual mai amfani 1932 3-GUDU RUBUTU MAI GIRMA, MAI GIRMA RUBUTU MAI GUDU, MAI RUBUTU MAI RUBUTU, MAI GIRMA.

Magana

• Manual mai amfani