Abubuwan da ke ciki boye
1 Danfoss PLUS+1 Madaidaicin EMD Speed ​​​​Digital Direction Block
2 Ƙayyadaddun bayanai
3 FAQs
4 Takardu / Albarkatu
4.1 Magana

Danfoss-logo

Danfoss PLUS+1 Madaidaicin EMD Speed ​​​​Digital Direction Block

Danfoss-PLUS+1-Madaidaicin-EMD-Speed-Digital-Direction-Aikin-Block-samfurin

Ƙayyadaddun bayanai

  • Sunan samfur: PLUS+1 Madaidaicin EMD Sensor Dijital Aiki Block
  • Mai ƙira: Danfodiyo
  • Kewayon shigarwar Spd: 1,250 zuwa 10,000,000 (Kowace Ƙididdigar U32 U16)
  • Kewayon Dir Input: 0 zuwa 5,250 (Vol/Voltagda U16)

powersolutions.danfoss.com

Tarihin bita

Danfoss-PLUS+1-Madaidaicin-EMD-Speed-Digital-Direction-Aikin-Block-fig-1

Manual mai amfani

EMD_SPD_DIR_D Block AikiDanfoss-PLUS+1-Madaidaicin-EMD-Speed-Digital-Direction-Aikin-Block-fig-2

Ƙarsheview
Wannan toshe aikin yana fitar da siginar rpm da na jagora bisa abubuwan da aka shigar daga na'urar Sensor Saurin EMD.

A kan masu sarrafa MC, wannan toshe aikin yana karɓar sa:

  • Shigar Spd ta hanyar shigarwar MFIN.
  • Shigar DigDir ta hanyar shigarwar MFIN na biyu, shigarwar DigIn, ko shigarwar DigAn.

A kan masu sarrafa SC, wannan toshe aikin yana karɓar sa:

  • Shigar Spd ta hanyar shigarwar MFIN.
  • Shigar DigDir ta hanyar shigarwar MFIN na biyu ko shigarwar DigAn.

Duba:

Game da Haɗin Toshe Aiki a shafi na 8 don ƙarewaview na wannan aikin toshe haɗin haɗin gwiwa da sigina.

EMD_SPD_DIR_D Block Aiki

Bukatun shigar da Mai sarrafawa don Tubalan Ayyukan EMD
Tebur masu zuwa suna lissafin buƙatun shigarwar mai sarrafawa don EMD SPD DIR, EMD SPD DIR A, da EMD SPD DIR D tubalan ayyuka.

Haɗin shigarwa-Masu Gudanar da MCDanfoss-PLUS+1-Madaidaicin-EMD-Speed-Digital-Direction-Aikin-Block-fig-3

Haɗin shigarwa - Masu Gudanar da SCDanfoss-PLUS+1-Madaidaicin-EMD-Speed-Digital-Direction-Aikin-Block-fig-4EMD_SPD_DIR_D Block Aiki

Abubuwan shigarwa

  • Ayyukan Toshe Abubuwan ShigaDanfoss-PLUS+1-Madaidaicin-EMD-Speed-Digital-Direction-Aikin-Block-fig-5

EMD_SPD_DIR_D Block Aiki

Abubuwan da aka fitar

  • Abubuwan Toshe AikiDanfoss-PLUS+1-Madaidaicin-EMD-Speed-Digital-Direction-Aikin-Block-fig-6

EMD_SPD_DIR_D Block Aiki

Game da Haɗin Toshe AikiDanfoss-PLUS+1-Madaidaicin-EMD-Speed-Digital-Direction-Aikin-Block-fig-7

Game da Haɗin Toshe AikiDanfoss-PLUS+1-Madaidaicin-EMD-Speed-Digital-Direction-Aikin-Block-fig-8

EMD_SPD_DIR_D Block Aiki

Matsayi da Fault Logic

  • Ba kamar sauran PLUS+1 tubalan ayyuka masu dacewa ba, wannan toshe aikin yana amfani da matsayi mara kyau da lambobin kuskure.
  • Hankalin HaliDanfoss-PLUS+1-Madaidaicin-EMD-Speed-Digital-Direction-Aikin-Block-fig-9

Bit 16 saita zuwa 1 yana gano daidaitaccen matsayi na Danfoss ko lambar kuskure.

  • Fault Logic
    Danfoss-PLUS+1-Madaidaicin-EMD-Speed-Digital-Direction-Aikin-Block-fig-10
  • Bit 16 saita zuwa 1 yana gano daidaitaccen matsayi na Danfoss ko lambar kuskure.
  • An ba da rahoton kuskuren jinkiri idan yanayin kuskuren da aka gano ya ci gaba don takamaiman lokacin jinkiri. Ba za a iya share kuskuren da aka jinkirta ba har sai yanayin kuskuren ya kasance ba a gano shi ba don lokacin jinkirin.
  • Katangar aikin tana kiyaye rahoton kuskuren da aka kama har sai an fitar da latch ɗin.

EMD_SPD_DIR_D Block Aiki

Ayyukan Toshe Ma'auni

  • Shigar da babban matakin shafi na EMD_SPD_DIR toshe toshe zuwa view kuma canza ma'aunin toshe wannan aikin.Danfoss-PLUS+1-Madaidaicin-EMD-Speed-Digital-Direction-Aikin-Block-fig-11
  • Ayyukan Toshe Ma'auniDanfoss-PLUS+1-Madaidaicin-EMD-Speed-Digital-Direction-Aikin-Block-fig-12

EMD_SPD_DIR_D Block Aiki

Game da Shigarwar Param

  • Yi amfani da shigarwar Param don shigar da ƙimar siga na waje zuwa wannan toshewar aikin.Danfoss-PLUS+1-Madaidaicin-EMD-Speed-Digital-Direction-Aikin-Block-fig-13

Bayanin HotoDanfoss-PLUS+1-Madaidaicin-EMD-Speed-Digital-Direction-Aikin-Block-fig-14

Saitunan Gudanarwa
Abubuwan shigarwa akan masu kula da MC da SC suna buƙatar tsari don aiki tare da wannan toshewar aikin. Duba:

  • Kanfigareshan Mai Kula da MC
  • SC Controller Configuration

Kanfigareshan Mai Kula da MC

Bayanin InputDanfoss-PLUS+1-Madaidaicin-EMD-Speed-Digital-Direction-Aikin-Block-fig-15

Saitunan Gudanarwa

Yadda ake saita MFIN don shigar da Spd

  1. A cikin samfurin JAGORA, shigar da shafin abubuwan shigarwa.Danfoss-PLUS+1-Madaidaicin-EMD-Speed-Digital-Direction-Aikin-Block-fig-16
  2. Shigar da MFIN wanda ke karɓar siginar shigarwa.
  3. Yi canje-canjen da aka nuna a cikin adadi mai zuwa.Danfoss-PLUS+1-Madaidaicin-EMD-Speed-Digital-Direction-Aikin-Block-fig-18

Yadda ake saita DigIn don shigar da DigDir

  1. A cikin samfurin JAGORA, shigar da shafin abubuwan shigarwa.Danfoss-PLUS+1-Madaidaicin-EMD-Speed-Digital-Direction-Aikin-Block-fig-19
  2. Shigar da shafin DigIn wanda ke karɓar siginar shigarwa.Danfoss-PLUS+1-Madaidaicin-EMD-Speed-Digital-Direction-Aikin-Block-fig-20
  3. Yi canje-canjen da aka nuna a cikin adadi mai zuwa.Danfoss-PLUS+1-Madaidaicin-EMD-Speed-Digital-Direction-Aikin-Block-fig-21

Saitunan Gudanarwa

SC Controller Configuration

  • Bayanin InputDanfoss-PLUS+1-Madaidaicin-EMD-Speed-Digital-Direction-Aikin-Block-fig-22
  • MFIN da kuke amfani da shi dole ne a yi masa lakabi Dig/Ana/Freq.
  • † Idan akwai.

Yadda ake saita MFIN don shigar da Spd

  1. A cikin samfurin JAGORA, shigar da shafin abubuwan shigarwa.Danfoss-PLUS+1-Madaidaicin-EMD-Speed-Digital-Direction-Aikin-Block-fig-23
  2. Shigar da MFIN wanda ke karɓar siginar shigarwa.Danfoss-PLUS+1-Madaidaicin-EMD-Speed-Digital-Direction-Aikin-Block-fig-24
  3. Yi canje-canjen da aka nuna a cikin adadi mai zuwa.Danfoss-PLUS+1-Madaidaicin-EMD-Speed-Digital-Direction-Aikin-Block-fig-25

Saitunan Gudanarwa

Yadda ake saita MFIN don shigar da DigDir

  1. A cikin samfurin JAGORA, shigar da shafin abubuwan shigarwa.Danfoss-PLUS+1-Madaidaicin-EMD-Speed-Digital-Direction-Aikin-Block-fig-29
  2. Shigar da MFIN wanda ke karɓar siginar shigarwa.Danfoss-PLUS+1-Madaidaicin-EMD-Speed-Digital-Direction-Aikin-Block-fig-27
  3. Yi canje-canjen da aka nuna a cikin adadi mai zuwa.Danfoss-PLUS+1-Madaidaicin-EMD-Speed-Digital-Direction-Aikin-Block-fig-28

Saitunan Gudanarwa

Yadda ake saita DigAn don shigar da DigDir

  1. A cikin samfurin JAGORA, shigar da shafin abubuwan shigarwa.Danfoss-PLUS+1-Madaidaicin-EMD-Speed-Digital-Direction-Aikin-Block-fig-29
  2. Shigar da DigAn wanda ke karɓar siginar shigarwa.
  3. Danfoss-PLUS+1-Madaidaicin-EMD-Speed-Digital-Direction-Aikin-Block-fig-30Yi canje-canjen da aka nuna a cikin adadi mai zuwa.Danfoss-PLUS+1-Madaidaicin-EMD-Speed-Digital-Direction-Aikin-Block-fig-31

Kayayyakin da muke bayarwa:

  • Abubuwan da aka bayar na Bent Axis Motors
  • Rufe Famfu na Piston Axial da Motoci
  • Nunawa
  • Electrohydraulic Power tuƙi
  • Electrohydraulics
  • Na'ura mai aiki da karfin ruwa tuƙi
  • Haɗin Kai Tsarukan
  • Joysticks da Sarrafa Hannu
  • Microcontrollers da software
  • Buɗe Wutar Lantarki Axial Piston
  • Orbital Motors
  • PLUS+1® JAGORA
  • Matsakaicin Valves
  • Sensors
  • tuƙi
  • Direbobin Haɗaɗɗen Wuta

Abubuwan da aka bayar na Danfoss Power Solutions

masana'anta ne na duniya kuma mai ba da kayayyaki masu inganci da na'urorin lantarki. Mun ƙware wajen samar da fasaha na zamani da mafita waɗanda suka yi fice a cikin matsanancin yanayin aiki na kasuwar wayar tafi da gidanka. Gina kan ƙwararrun aikace-aikacen mu, muna aiki tare da abokan cinikinmu don tabbatar da ingantaccen aiki don faɗuwar kewayon motocin kashe-kashe. Muna taimaka wa OEMs a duk duniya suna hanzarta haɓaka tsarin, rage farashi da kawo motocin zuwa kasuwa cikin sauri. Danfoss - Abokin Ƙarfafan Ƙarfafan Ƙarfafawar ku a Wayar Hannun Ruwa. Je zuwa www.powersolutions.danfoss.com don ƙarin bayanin samfurin.

Duk inda motocin da ba su kan hanya suke wurin aiki, Danfoss ma. Muna ba da goyan bayan ƙwararrun ƙwararrun abokan cinikinmu a duk duniya, tare da tabbatar da mafi kyawun mafita don yin fice. Kuma tare da faffadan cibiyar sadarwa na Abokan Sabis na Duniya, muna kuma ba da cikakkiyar sabis na duniya don duk abubuwan haɗin gwiwarmu. Da fatan za a tuntuɓi wakilin Danfoss Power Solution mafi kusa da ku.

Comatrol

Schwarzmüller-Inverter

Tubrolla

Valmbova

Hydro-Gear

Daikin-Sauer-Danfoss

Danfoss Power Solutions (US) Kamfanin 2800 Gabas 13th Street Ames, IA 50010, USA Phone: +1 515 239 6000 Danfoss Power Solutions GmbH & Co. OHG Krokamp 35 D-24539 Neumünster, Jamus Waya: +49 4321 871 Qiao, Pudong Sabuwar Gundumar Shanghai, China 0 Waya: +81 6430 45 7488

Danfoss ba zai iya karɓar alhakin yuwuwar kurakurai a cikin kasida, ƙasidu da sauran bugu. Danfoss yana da haƙƙin canza kayan sa ba tare da sanarwa ba. Wannan kuma ya shafi samfuran da aka riga aka yi kan oda muddin ana iya yin irin waɗannan sauye-sauye ba tare da wasu canje-canjen da suka zama dole ba a cikin takamaiman ƙayyadaddun da aka amince da su. Duk alamun kasuwanci a cikin wannan kayan mallakar kamfanoni ne. Danfoss da alamar tambarin Danfoss alamun kasuwanci ne na Danfoss A/S. An kiyaye duk haƙƙoƙi. www.danfoss.com

FAQs

Tambaya: Menene voltage kewayo don shigarwar Dir?
A: Voltage kewayon Dir A shigarwa shine 0 zuwa 5,250 (Volt/Voltagku 16).

Tambaya: Ta yaya ake ƙididdige RPM ta hanyar toshe aikin?
A: Ana ƙididdige fitowar RPM ta amfani da siginar Per, Siginar Ƙidaya, da ƙimar sigar Puls/Rev da aka karɓa daga shigarwar Sensor Speed.

Takardu / Albarkatu

Danfoss PLUS+1 Madaidaicin EMD Speed ​​​​Digital Direction Block [pdf] Jagorar mai amfani
PLUS 1 Madaidaicin EMD Speed ​​​​Digital toshe Aiki na Dijital, PLUS 1, Madaidaicin EMD Speed ​​​​Digital Direction Tushe

Magana

Bar sharhi

Ba za a buga adireshin imel ɗin ku ba. Ana yiwa filayen da ake buƙata alama *