AXXESS AXDIS-GMLN29 Data Interface tare da SWC

Ƙayyadaddun samfur

• Samfura: AXDIS-GMLN29
• Daidaitawa: GM Data Interface tare da SWC 2006-Up
• Aikace-aikace: Daban-daban Buick, Cadillac, Chevrolet, GMC, Hummer, Pontiac, Saturn, Suzuki model

Umarnin Amfani da samfur

Umarnin Shigarwa
Kafin fara tsarin shigarwa, tabbatar da ziyarci AxxessInterfaces.com don ƙayyadaddun aikace-aikacen abin hawa na baya-bayan nan.

Muhimmiyar Bayani: Cire haɗin tashar baturi mara kyau tare da maɓalli daga cikin kunnawa kafin shigar da samfurin. Tabbatar cewa duk haɗin kai, musamman fitilun jakunkuna na iska, an toshe a ciki kafin sake haɗa baturin ko hawan keken wuta don gwada samfurin. Koma zuwa umarnin rediyo na bayan kasuwa kuma.

Abubuwan da suka dace don AXDIS-GMLN29
AXDIS-GMLN29 ya dace da kewayon motocin da suka haɗa da Buick Enclave, Cadillac DTS, Chevrolet Avalanche, GMC Acadia, Hummer H2, Pontiac Torrent, da ƙari. Tabbatar bincika takamaiman samfurin da daidaiton shekara.

Haɗin kai
An ƙera keɓancewa don yin aiki tare da waɗanda baampanalogues, m ampingantacce, ko dijital ampsamfurori masu inganci. Bi umarnin a hankali bisa na abin hawan ku ampnau'in lification don guje wa batutuwan sauti. Idan babu tabbas game da abin hawan ku ampnau'in liifier, tuntuɓi dillalin ku na gida don ƙarin bayani.

FAQ

Tambaya: Ta yaya zan san idan abin hawa na masana'anta ne amplified ko a'a?
A: Don sanin ko motarka masana'anta ce amplified, duba takardar shaidar Sabis ɗin Sabis ɗin da ke cikin akwatin safar hannu don lambobin RPO Y91, STZ, ko wasu da aka ambata a cikin littafin. Waɗannan lambobin suna nuna kasancewar dijital amplifi a cikin motar ku.

INTERFACE BANGASKIYA

• Saukewa: AXDIS-GMLN29
• Saukewa: AXDIS-GMLN29
• Mai haɗin mata 3.5mm tare da ɗigon jagorori
• 16-pin kayan doki tare da tube jagororin
• Farashin RSE
• Ajiyayyen kayan aikin kyamara
• 4-pin zuwa 4-pin resistor pad kayan doki
• Adaftar Eriya

KAYAN NAN AKE BUKATA

• Mai yankan waya
• Kayan aiki
• Gun bindiga
• Tef
• Masu haɗin (example: butt-connectors, caps caps, da dai sauransu)
• Karamin lebur-blade sukudireba

APPLICATIONS
Duba cikin murfin gaba

GM Data Interface tare da SWC 2006-Up
Ziyarci AxxessInterfaces.com don sabunta abubuwan hawa takamaiman aikace-aikace.

SIFFOFIN INTERFACE

• Tsara don wadanda baamplified, ko analog / dijital ampsamfurori masu inganci
• Yana ba da ƙarfin haɗi (12-volt 10-amp)
• Yana Riƙe RAP (Ƙarfin Na'ura Mai Rike)
• Yana ba da abubuwan fitar NAV (birki na yin kiliya, baya, ma'anar sauri)
• Yana riƙe da sarrafa sauti akan sitiyarin
• Yana riƙe ma'auni kuma ya ɓace (ban da dijital ampSamfura masu inganci)
• Rike RSE (Rear Seat Entertainment)
• Yana riƙe sauti
• Yana riƙe da OnStar® / OE Bluetooth
• Daidaitacce matakin OnStar®
• Yana riƙe jack ɗin AUX-IN masana'anta
• Yana riƙe kyamarar madadin masana'anta
• Yana riƙe SAT (Radiyon Tauraron Dan Adam)
• Ya haɗa da adaftar eriya
• Micro-B USB ana sabunta shi

MetraOnline.com za a iya amfani da www.MetraOnline.com Bayanin samfur don taimakawa tare da umarnin taro dash. Kawai shigar da Shekarar ku, Kera, Motar Mota a cikin jagorar dacewa da abin hawa kuma nemi Umarnin Shigar Dash Kit.

HANKALI: Tare da maɓalli daga kunnawa, cire haɗin tashar baturi mara kyau kafin shigar da wannan samfur. Tabbatar cewa duk haɗin shigarwa, musamman fitilolin alamar jakar iska, an toshe a ciki kafin sake haɗa baturin ko hawan keken wuta don gwada wannan samfur.

NOTE: Koma kuma zuwa umarnin da aka haɗa tare da rediyon kasuwa.

APPLICATIONS NA AXDIS-GMLN29

BUICK

• Ƙarfafa………………………………………………………………… 2008-2017
• Lucerne……………………………………………………………………… 2006-2011

CADILLAC

• DTS †………………………………………………………………………….2006-2011
• Escalade †………………………………………………………………..2007-2014
• SRX †………………………………………………………………………..2007-2009

CHEVROLET

• Avalanche *Δ……………………………………………….2007-2013
• Wasannin Captiva……………………………………………………….2012-2015
• Cheyenne (IOB)……………………………………………….2016-2018

CHEVROLET (CI GABA)

• Cheyenne (babu RPO)……………………………….2012-2014
• Equinox……………………………………………………… 2007-2009
• Bayyana ‡……………………………………………………….2008-2023
• Impala……………………………………………………………………….2006-2013
• Monte Carlo …………………………………………..2006-2007
• Silverado *Δ……………………………………………………….2007-2013
• Spark (IOB) ………………………………………………………….2016-2018
• Bakin Karfi **Δ……………………………………………….2007-2014
• Tahoe **Δ……………………………………………………………….2007-2014
• Tafiya……………………………………………….2009-2017

GMC

• Acadia………………………………………………………..2007-2016
• Savana ‡……………………………………………………………….2008-2023
• Sierra 2500/3500 *Δ………………………………..2014
• Saliyo *Δ……………………………………………………….2007-2013
• Yukon/Denali / XL **Δ………………………………..2007-2014

HUMMER
H2 †……………………………………………………………………….2008-2009

PONTIAC

• Torrent……………………………………………….2007-2009
• Watsawa ………………………………………………………………… 2009

SATURN

• Outlook……………………………………………………… 2007-2009
• Wuce……………………………………………………….2007-2009

SUZUKI
XL-7……………………………………………………………………….2007-2009

• Waɗannan motocin suna da dijital amp zaɓi. Da fatan za a yi la'akari da sitika "Gano Sashe na Sabis" da ke cikin akwatin safar hannu don lambar RPO Y91. Idan Y91 yana nan, to motar tana sanye da dijital ampmai sanyaya wuta.
• Waɗannan motocin suna da dijital amp zaɓi. Da fatan za a yi la'akari da sitika "Gano Sashe na Sabis" da ke cikin akwatin safar hannu don lambar RPO STZ ko Y91. Idan STZ ko Y91 yana nan, motar tana sanye da dijital ampmai sanyaya wuta.
• † Waɗannan motocin ma'auni ne na dijital ampmai sanyaya wuta.
• ‡ Don samfuran 2013-2015 sanye take da NAV suna amfani da AXDIS-GMLN44.

Don samfuran 2012 da aka sanye da NAV suna amfani da AXDIS-GMLN44.

HANYOYI

Hankali! Wannan ƙirar za ta yi aiki tare da samfuran waɗanda ko dai baampanalogues, m ampingantacce, ko dijital ampingantacce. Da fatan za a bi umarnin a hankali don abin hawan ku. Rashin yin hakan zai haifar da ko dai babu sauti, ko ƙaramar sauti. Idan ba ku da tabbas idan abin hawan ku masana'anta ne amplãbãri ko a'a, da fatan za a tuntuɓi dillalin ku na gida.

Don Model ba tare da wani Amplififi
Daga kayan doki 16-pin tare da tsiri yana kaiwa zuwa gidan rediyon bayan kasuwa

• Haɗa Jar waya zuwa na'urar haɗi.
• Haɗa Blue/Fara waya zuwa wayar eriyar wutar lantarki.
• Idan rediyon bayan kasuwa yana da waya mai haske, haɗa waya Orange/White zuwa gare ta.
• Idan gidan rediyon bayan kasuwa yana da wayar bebe, haɗa wayar Brown zuwa gare ta. Idan ba a haɗa wayar bebe ba, rediyon zai kashe lokacin da aka kunna OnStar®.
• Haɗa wayar Grey zuwa mafi kyawun lasifikar lasifika ta dama.
• Haɗa waya mai launin toka/Baƙar fata zuwa fitowar magana mara kyau ta gaba.
• Haɗa Farar waya zuwa gefen hagu tabbatacce fitarwa na lasifika.
• Haɗa Wayar Fari/Baƙi zuwa fitowar mai magana mara kyau ta gaba.

Wayoyin (3) masu zuwa suna don multimedia/radiyon kewayawa waɗanda ke buƙatar waɗannan wayoyi.

• Haɗa waya ta Blue/Pink zuwa wayar VSS/saurin waya.
• Haɗa Green/Purple waya zuwa wayar baya.
• Haɗa Wayar Green Green zuwa waya birkin ajiye motoci
• Cire kuma watsi da waɗannan wayoyi (4) masu zuwa, ba za a yi amfani da su a cikin wannan aikace-aikacen ba: Green, Green/Black, Purple and Purple/Black.

Daga AXDIS-GMLN29 Harness zuwa Gidan Rediyon Bayan Kasuwa

• Haɗa Black waya zuwa ƙasa waya.
• Haɗa wayar Yellow zuwa wayar baturi.
• Yanke resistors daga Green, Green/Black, Purple, da Purple/Black wayoyi a ƙasan zafin zafi.
• Haɗa Green waya zuwa hagu tabbatacce fitarwa na baya.
• Haɗa Green/Baƙar waya waya zuwa hagu na baya mara kyau fitarwa.
• Haɗa wayar Purple zuwa mafi ingancin lasifikar dama ta baya.
• Haɗa Purple/Black waya zuwa madaidaicin fitowar mai magana mara kyau.
• Tabbatar cewa an haɗa haɗin (2) 4-pin Molex tare.
  Lura: Ba za a yi amfani da kayan doki na resistor 4-pin zuwa 4-pin a cikin wannan aikace-aikacen ba.
• Ana amfani da wayar Black/Yellow don daidaita matakin OnStar® don samfuran da basu zo da kayan sarrafa sitiyari ba. Koma zuwa sashin daidaita matakin OnStar® don ƙarin umarni.
• Haɗa jajayen ja da fari na RCA zuwa jakunan AUX-IN mai jiwuwa na gidan rediyon bayan kasuwa.
• Yi watsi da jack ɗin DIN da Red waya.

Lura: Relay ɗin da aka haɗe zuwa kayan aikin AXDIS-GMLN29 don danna maɓallin juyi mai ji ne kawai. Ba a buƙatar ƙarin matakai don riƙe wannan fasalin, don haka bar relay kamar yadda yake.

Ci gaba zuwa 3.5mm jack tutiya riƙe iko

Hankali! Wannan ƙirar za ta yi aiki tare da samfuran waɗanda ko dai waɗanda baampanalogues, m ampingantacce, ko dijital ampingantacce. Da fatan za a bi umarnin a hankali don abin hawan ku. Rashin yin hakan zai haifar da ko dai babu sauti, ko ƙaramar sauti. Idan ba ku da tabbas idan abin hawan ku masana'anta ne amplãbãri ko a'a, da fatan za a tuntuɓi dillalin ku na gida.

Don Samfura tare da Analog Amplififi
Daga kayan doki 16-pin tare da tsiri yana kaiwa zuwa gidan rediyon bayan kasuwa

• Haɗa Jar waya zuwa na'urar haɗi.
• Haɗa Blue/White waya zuwa amp kunna waya. Dole ne a haɗa wannan waya don jin sauti daga masana'anta ampmai sanyaya wuta.
• Idan rediyon bayan kasuwa yana da waya mai haske, haɗa waya Orange/White zuwa gare ta.
• Idan gidan rediyon bayan kasuwa yana da wayar bebe, haɗa wayar Brown zuwa gare ta. Idan ba a haɗa wayar bebe ba, rediyon zai kashe lokacin da aka kunna OnStar®.
• Haɗa wayar Grey zuwa mafi kyawun lasifikar lasifika ta dama.
• Haɗa waya mai launin toka/Baƙar fata zuwa fitowar magana mara kyau ta gaba.
• Haɗa Farar waya zuwa gefen hagu tabbatacce fitarwa na lasifika.
• Haɗa Wayar Fari/Baƙi zuwa fitowar mai magana mara kyau ta gaba.

Wayoyin (3) masu zuwa suna don multimedia/radiyon kewayawa waɗanda ke buƙatar waɗannan wayoyi.

• Haɗa waya ta Blue/Pink zuwa wayar VSS/saurin waya.
• Haɗa Green/Purple waya zuwa wayar baya.
• Haɗa Wayar Green Green zuwa waya birkin ajiye motoci
• Cire kuma watsi da waɗannan wayoyi (4) masu zuwa, ba za a yi amfani da su a cikin wannan aikace-aikacen ba: Green, Green/Black, Purple, Purple/ Black

Daga kayan aikin AXDIS-GMLN29 zuwa rediyon kasuwa

• Haɗa Black waya zuwa ƙasa waya.
• Haɗa wayar Yellow zuwa wayar baturi.
• Haɗa Green waya zuwa hagu tabbatacce fitarwa na baya.
• Haɗa Green/Baƙar waya waya zuwa hagu na baya mara kyau fitarwa.
• Haɗa wayar Purple zuwa mafi ingancin lasifikar dama ta baya.
• Haɗa Purple/Black waya zuwa madaidaicin fitowar mai magana mara kyau.
• Cire haɗin (2) 4-pin Molex haši, sa'an nan kuma haɗa 4-pin zuwa 4-pin resistor kushin kushin.
• Ana amfani da wayar Black/Yellow don daidaita matakin OnStar® don samfuran da basu zo da kayan sarrafa sitiyari ba. Koma zuwa sashin daidaita matakin OnStar® don ƙarin umarni.
• Haɗa jajayen ja da fari na RCA zuwa jakunan AUX-IN mai jiwuwa na gidan rediyon bayan kasuwa.
• Yi watsi da jack ɗin DIN da Red waya.

Lura: Relay ɗin da aka haɗe zuwa kayan aikin AXDIS-GMLN29 don danna maɓallin juyi mai ji ne kawai. Ba a buƙatar ƙarin matakai don riƙe wannan fasalin, don haka bar relay kamar yadda yake.

Ci gaba zuwa 3.5mm jack tutiya riƙe iko

Hankali! Wannan ƙirar za ta yi aiki tare da samfuran waɗanda ko dai waɗanda baampanalogues, m ampingantacce, ko dijital ampingantacce. Da fatan za a bi umarnin a hankali don abin hawan ku. Rashin yin hakan zai haifar da ko dai babu sauti, ko ƙaramar sauti. Idan ba ku da tabbas idan abin hawan ku masana'anta ne amplãbãri ko a'a, da fatan za a tuntuɓi dillalin ku na gida.

Don Samfura tare da Dijital Amplififi
Daga kayan doki 16-pin tare da tsiri yana kaiwa zuwa gidan rediyon bayan kasuwa

• Haɗa Jar waya zuwa na'urar haɗi.
• Haɗa Blue/White waya zuwa amp kunna waya. Dole ne a haɗa wannan waya don jin sauti daga masana'anta ampmai sanyaya wuta.
• Idan rediyon bayan kasuwa yana da waya mai haske, haɗa waya Orange/White zuwa gare ta.
• Idan gidan rediyon bayan kasuwa yana da wayar bebe, haɗa wayar Brown zuwa gare ta. Idan ba a haɗa wayar bebe ba, rediyon zai kashe lokacin da aka kunna OnStar®.
• Haɗa wayar Grey zuwa mafi kyawun lasifikar lasifika ta dama.
• Haɗa waya mai launin toka/Baƙar fata zuwa fitowar magana mara kyau ta gaba.
• Haɗa Farar waya zuwa gefen hagu tabbatacce fitarwa na lasifika.
• Haɗa Wayar Fari/Baƙi zuwa fitowar mai magana mara kyau ta gaba.
• Haɗa Green waya zuwa hagu tabbatacce fitarwa na baya.
• Haɗa Green/Baƙar waya waya zuwa hagu na baya mara kyau fitarwa.
• Haɗa wayar Purple zuwa mafi ingancin lasifikar dama ta baya.
• Haɗa Purple/Black waya zuwa madaidaicin fitarwa mara kyau na baya.

Wayoyin (3) masu zuwa suna don multimedia/radiyon kewayawa waɗanda ke buƙatar waɗannan wayoyi.

• Haɗa waya ta Blue/Pink zuwa wayar VSS/saurin waya.
• Haɗa Green/Purple waya zuwa wayar baya.
• Haɗa Wayar Green Green zuwa waya birkin ajiye motoci

Daga kayan aikin AXDIS-GMLN29 zuwa rediyon kasuwa

• Haɗa Black waya zuwa ƙasa waya.
• Haɗa wayar Yellow zuwa wayar baturi.
• Tabbatar cewa an haɗa haɗin (2) 4-pin Molex tare.
  Lura: Ba za a yi amfani da kayan doki na resistor 4-pin zuwa 4-pin a cikin wannan aikace-aikacen ba.
• Ana amfani da wayar Black/Yellow don daidaita matakin OnStar® don samfuran da basu zo da kayan sarrafa sitiyari ba. Koma zuwa sashin daidaita matakin OnStar® don ƙarin umarni.
• Cire kuma watsi da waɗannan wayoyi (4) masu zuwa, ba za a yi amfani da su a cikin wannan aikace-aikacen ba: Green, Green/Black, Purple, Purple/ Black.
• Haɗa jajayen ja da fari na RCA zuwa jakunan AUX-IN mai jiwuwa na gidan rediyon bayan kasuwa.
• Yi watsi da jack ɗin DIN da Red waya.

Lura: Relay ɗin da aka haɗe zuwa kayan aikin AXDIS-GMLN29 don danna maɓallin juyi mai ji ne kawai. Ba a buƙatar ƙarin matakai don riƙe wannan fasalin, don haka bar relay kamar yadda yake.

Ci gaba zuwa 3.5mm jack tutiya riƙe iko

3.5mm Jack Steering Wheel Control Riƙe

• Za a yi amfani da jack ɗin 3.5mm don riƙe ikon sarrafa sauti akan sitiyarin.
  • Don radiyon da aka jera a ƙasa, haɗa haɗin haɗin 3.5mm na mace da aka haɗa tare da ɗigon jagora akan jack ɗin SWC na 3.5mm na AXDIS-GMLN29. Duk wasu wayoyi da suka rage sun kashe kuma suyi watsi da su.
    • Husufi: Haɗa waya mai sarrafa sitiyarin, yawanci launin ruwan kasa, zuwa wayar Brown / White na mahaɗin. Don haka haɗa sauran waya mai sarrafa sitiyarin, yawanci launin ruwan kasa / Fari, zuwa waya mai ruwan kasa na mahaɗin.
    • Metra OE: Haɗa maɓalli mai sarrafa sitiya waya (Gray) zuwa wayar Brown.
    • Kenwood ko zaɓi JVC tare da waya mai sarrafa sitiyari: Haɗa Blue/Yellow waya zuwa waya Brown.
      Lura: Idan injin rediyon ku na Kenwood ya gano azaman JVC, saita nau'in rediyo da hannu zuwa Kenwood. Duba umarnin ƙarƙashin canza nau'in rediyo.
    • XITE: Haɗa wayar SWC-2 mai sarrafa sitiya daga rediyo zuwa wayar Brown.
    • Aku Asteroid Smart ko Tablet: Haɗa jack ɗin 3.5mm cikin AXSWCH-PAR (an sayar da shi daban), sannan ka haɗa haɗin haɗin 4-pin daga AXSWCH-PAR cikin rediyo. Lura: Dole ne a sabunta rediyo zuwa rev. 2.1.4 ko mafi girma software.
    • Rediyon "2 ko 3 waya" na duniya: Haɗa wayar sarrafa sitiyari, ana kiranta da Maɓalli-A ko SWC-1, zuwa wayar Brown na mahaɗin. Sa'an nan kuma haɗa sauran sitiyarin kula da waya, da ake kira Key-B ko SWC-2, zuwa Brown/White waya na connector. Idan rediyo ya zo da waya ta uku don ƙasa, yi watsi da wannan waya.
      Lura: Bayan an tsara hanyar sadarwa zuwa abin hawa, koma zuwa littafin da aka tanada tare da rediyo don sanya maɓallan SWC. Tuntuɓi masana'antar rediyo don ƙarin bayani.
    • Ga dukkan sauran rediyo: Haɗa jack ɗin 3.5mm daga kayan aikin AXDIS-GMLN29 a cikin jack ɗin akan radiyon bayan kasuwa wanda aka keɓance don ƙirar sarrafa sitiyari na waje. Da fatan za a koma zuwa littafin rediyo na bayan kasuwa idan kuna shakkar inda jack ɗin 3.5mm ke zuwa.

Kyamarar Ajiyayyen da RSE Harness (idan an zartar)

• Idan riƙe kyamarar madadin masana'anta, haɗa jack ɗin Rawaya RCA zuwa shigar da kyamarar madadin rediyon kasuwa.
• Idan riƙe tsarin nishaɗin wurin zama na baya:
  • Haɗa Black waya tare da tashar zobe zuwa chassis na rediyon kasuwa.
  • Daga jacks RCA masu lakabi "DAGA REAR A/V INPUT" zuwa shigar da A/V na rediyon bayan kasuwa:
  • Haɗa jack ɗin Rawaya RCA zuwa bidiyo a ciki.
  • Haɗa jacks ɗin Red da Farin RCA zuwa sautin cikin.
• Daga jacks RCA da aka yiwa lakabin "ZUWA KYAUTA SCREEN" zuwa fitowar A/V na rediyon bayan kasuwa:
  • Haɗa jack ɗin RCA na Yellow zuwa fitar da bidiyon.
  • Haɗa jajayen ja da fari na RCA zuwa fitar da sauti.

SHIGA

Tare da Maɓalli a Matsayin Kashe
Haɗa kayan doki 16-pin tare da jagororin tsiri, da kayan doki na AXDIS-GMLN29, cikin mahallin.

Hankali! Kar a haɗa abin dokin AXDIS-GMLN29 zuwa kayan aikin waya a cikin abin hawa tukuna.

Hankali! Idan riƙe da sarrafa sitiyari, tabbatar cewa an haɗa jack/waya zuwa rediyo kafin a ci gaba. Idan aka tsallake wannan matakin, za a buƙaci a sake saita kebul ɗin don sarrafa sitiyarin ya yi aiki.

SHIRI

Don matakan da ke ƙasa, LED ɗin da ke cikin ƙirar za a iya gani kawai yayin aiki. Ba a buƙatar buɗe kebul don ganin LED ɗin

• Fara abin hawa.
• Haɗa kayan doki na AXDIS-GMLN29 zuwa igiyar waya a cikin abin hawa.
• Da farko LED ɗin zai kunna kore mai ƙarfi, sannan ya kashe na ɗan daƙiƙa yayin da yake gano rediyon da aka shigar ta atomatik.
• Daga nan LED ɗin zai yi walƙiya ja har zuwa sau 24 wanda ke nuna wace rediyo ke da haɗin Intanet, sannan a kashe na ɗan daƙiƙa biyu. Kula da hankali ga yawan jan walƙiya akwai. Wannan zai taimaka wajen magance matsala, idan ya cancanta.
• Koma sashin amsawar LED don ƙarin bayani.
• Bayan daƙiƙa biyu LED ɗin zai kunna ja mai ƙarfi yayin da injin ke dubawa ta gano abin hawa. Rediyon zai kashe a wannan lokacin. Wannan tsari ya kamata ya ɗauki 5 zuwa 30 seconds.
• Da zarar an gano motar ta atomatik ta hanyar sadarwa, LED ɗin zai kunna Green Green, kuma rediyon zai dawo, yana nuna shirye-shirye sun yi nasara.
• Gwada duk ayyukan shigarwa don aiki mai kyau, kafin sake haɗa dash. Idan mai dubawa ya kasa aiki, koma zuwa Sake saitin AXDIS-GMLN29.

Lura: LED ɗin zai kunna kore mai ƙarfi na ɗan lokaci, sannan a kashe a ƙarƙashin aiki na yau da kullun bayan an zagaya maɓallin.

gyare-gyare

Daidaita Matsayin Sauti (Digital AmpModel kawai)

• Tare da kunna abin hawa da rediyo, kunna ƙarar sama 3/4 na hanya.
• Tare da ƙaramin lebur-screwdriver, daidaita ƙarfin ƙarfin ƙarfin agogo don ɗaga matakin sauti; karkata agogo baya don rage matakin sauti.
• Da zarar a matakin da ake so, daidaita matakin sauti ya cika.

Daidaita Matsayin Chime

• Tare da abin hawa, kashe shi kuma bar makullin a kunna. Bude kofar direba; za a ji kara.
• Jira daƙiƙa 10, sannan tare da ƙaramin screwdriver, juya ƙarfin ƙarfin agogon agogo don ɗaga matakin ƙararrawa; counterclockwise don runtse matakin karan.
• Lokacin da chime ya kasance a matakin da ake so, cire maɓallan daga kunnawa. Wannan zai kulle ƙarar chime a matakin da yake yanzu.

Daidaita Matsayin OnStar®

• Danna maɓallin OnStar® don kunna shi.
• Yayin da OnStar® ke magana, danna maɓallin KYAU ko KYAUTA a kan sitiyarin don ɗaga ko rage matakin OnStar®.
• Idan abin hawa bai zo sanye da abubuwan sarrafa sitiyari ba, nemo baƙar fata/Yellow waya akan kayan AXDIS-GMLN29.
• Yayin da OnStar® ke magana, matsa Black/Yellow waya zuwa ƙasa. Da zarar an saita matakin OnStar®, zai kasance a wannan matakin har sai an sake danna Black/Yellow waya zuwa ƙasa.

KARIN SIFFOFI

AUX-IN, RSE da SAT
Idan motar tana dauke da AUX-IN, nishaɗin wurin zama na baya, ko rediyon tauraron dan adam, AXDIS-GMLN29 na iya riƙe waɗannan fasalulluka.

Bayanan kula Lokacin Riƙe AUX-IN

• Za a iya amfani da jack ɗin AUX-IN idan jack ɗin AUX-IN ce kaɗai.
• Idan motar ta zo sanye da jack ɗin AUX-IN da tashar USB, ba za a iya riƙe su ba.
• Canja tushen rediyo zuwa AUX-IN; tauraron dan adam radio zai fara kunnawa.
• Nuni a cibiyar bayanan direba zai nuna bayanan rediyon tauraron dan adam.
• Don samun damar abubuwan ci-gaba na rediyon tauraron dan adam, danna kuma ka riƙe maɓallin SOURCE akan sitiyarin na tsawon daƙiƙa 3.
• An jera a ƙasa ayyukan maɓallan sarrafa sitiyari yayin samun damar abubuwan da suka ci gaba:
  • NEMA – Gungura menu sama.
  • NEMA KASA – Gungura menu ƙasa.
  • KYAUTA - Shiga
• An jera a ƙasa akwai zaɓuɓɓukan menu na ci-gaba:
  • Nuna Rubutu - Menu na fita.
  • Saita Yanayin Tuna – Yana ba mai amfani damar zaɓar kunna ta ko dai saiti, ko tashoshi.
  • Saita Saita – Yana ba mai amfani damar tsara saitattun saiti.
  • Saita Nuni - Yana ba mai amfani damar zaɓar wane bayanin rediyon tauraron dan adam ya kamata a nuna.
  • Saita Yanayin Rubutun Tauraron Dan Adam - Yana ba mai amfani damar saita tsawon nunin bayanan rediyon tauraron dan adam. Zabuka su ne; Kunnawa, A kashe, ko 5 seconds (tsoho shine sakan 5).
• Don samun damar AUX-IN ko nishaɗin wurin zama na baya, latsa ka riƙe maɓallin SOURCE akan sitiyarin na tsawon daƙiƙa 2. Wannan zai canza zuwa tushe na gaba da ke akwai. Duk lokacin da aka danna maɓallin SOURCE na daƙiƙa 2, tushen zai canza. Jerin tushen shine SAT/RSE/AUX-IN. Cibiyar bayanan direba za ta ba da tabbacin gani na wane tushe ke aiki.

STEERING CONTROL SETTING

Bayanin LED

• Fitilar LED (24) Red LED tana wakiltar masana'anta na rediyo daban don dubawar AXDIS-GMLN29 don ganowa.
• Don misaliampto, idan kuna shigar da rediyon JVC, ƙirar AXDIS-GMLN29 za ta kunna ja (5), sannan ta tsaya.
• A dama akwai Legend Feedback LED, wanda ke nuna adadin walƙiya na masana'antar rediyo.

LED Feedback Legend

Filashi Kidaya	Rediyo
1	Eclipse (nau'i na 1) †
2	Kenwood ‡
3	Clarion (nau'i 1) †
4	Sony / Dual
5	JVC
6	Majagaba / Jensen
7	Alpine *
8	Visteon
9	Valor
10	Clarion (nau'i na 2) †
11	Metra OE
12	Eclipse (nau'i na 2) †

Filashi Kidaya	Rediyo
13	LG
14	Aku **
15	XITE
16	Philips
17	TBA
18	JBL
19	Mahaukaci
20	Magnadyne
21	Shugaba
22	Axxera
23	Axxerra (na ta 2)
24	Alpine (na ta 2)

MULKI

• Idan AXDIS-GMLN29 ya haskaka RED (7) sau, kuma ba a shigar da rediyon Alpine ba, wannan yana nufin akwai buɗaɗɗen haɗin da ba a lissafta shi ba. Tabbatar cewa an haɗa jack ɗin 3.5mm zuwa madaidaicin jack/waya a cikin rediyo.
• Ana buƙatar AXSWCH-PAR (ana siyarwa daban). Hakanan, software a cikin rediyo dole ne ta zama rev. 2.1.4 ko mafi girma.
• † Idan an shigar da rediyon Clarion ko Eclipse kuma masu sarrafa motar ba su aiki, canza rediyo zuwa Clarion (nau'in 2) ko Eclipse (nau'in 2) bi da bi. Idan har yanzu sarrafa sitiyarin baya aiki, koma zuwa Canja daftarin aiki Nau'in Rediyo da ke akwai a axxessinterfaces.com .
• ‡ Idan an shigar da rediyon Kenwood kuma bayanin LED ya haskaka (5) maimakon (2), da hannu canza nau'in rediyo zuwa Kenwood. Don yin wannan, koma zuwa Canja daftarin aiki Nau'in Rediyo a shafi na gaba, kuma akwai a axxessinterfaces.com .

Hankali: Hakanan za'a iya amfani da App na Axxess Updater don tsara wasu ƙananan sassan (3) masu zuwa, har sai an fara fara aikin kuma an tsara shi.

Canja Nau'in Rediyo
Idan filasha na LED bai dace da rediyon da kuka haɗa ba, dole ne ku shirya AXDIS-GMLN29 da hannu don gaya masa wanne rediyo yake da alaƙa da shi.

1. Bayan (3) daƙiƙa na kunna maɓalli, danna ka riƙe maɓallin ƙara-ƙasa akan sitiyarin har sai LED a cikin AXDIS-GMLN29 ya yi ƙarfi.
2. Saki maɓallin ƙara-ƙasa; LED din zai fita yana nuna cewa yanzu muna cikin Canza yanayin Nau'in Rediyo.
3. Koma zuwa Legend Radio don sanin lambar rediyo da kuke son yi.
4. Latsa ka riƙe maɓallin Ƙara-Up har sai LED ya yi ƙarfi, sannan a saki. Maimaita wannan mataki don lambar rediyon da kuke so da kuka zaɓa.
5. Da zarar an zaɓi lambar rediyon da ake so, danna kuma ka riƙe maɓallin ƙara-ƙasa akan sitiyarin har sai LED ɗin ya yi ƙarfi. LED ɗin zai kasance a kunne na kusan daƙiƙa 3 yayin da yake adana sabbin bayanan rediyo.
6. Da zarar LED ya kashe, yanayin Canja Nau'in Rediyo zai ƙare. Yanzu zaku iya gwada ikon sarrafa sitiyari.

Lura: Idan a kowane lokaci mai amfani ya kasa danna kowane maɓalli na tsawon lokaci fiye da daƙiƙa 10, wannan tsari zai ƙare.

Labarin Radiyo

Filashi Kidaya Rediyo Labari
1. Eclipse (na ta 1)	13. LG
2. Kenwood	14. Aku
3. Clarion (na ta 1)	15. XITE
4. Sony / Dual	16. Philips
5. JVC	17. TBA
6. Majagaba / Jensen	18. JBL
7. Alpine	19. Mahaukaci
8. Visteon	20. Magnadyne
9. Valor	21. Shugaba
10. Clarion (na ta 2)	22. Axxera
11. Metra OE	23. Axxerra (nau'i 2)
12. Eclipse (na ta 2)	24. Alpine (nau'in 2)

Remapping Buttons Control Wheel
Bari mu ce kuna da AXDIS-GMLN29 farawa kuma kuna son canza aikin maɓalli don maɓallan sarrafa sitiyari. Domin misaliampto, kuna son neman-Up ya zama bebe. Bi matakan da ke ƙasa don sake taswirar maɓallan sarrafa sitiyari

1. Tabbatar cewa AXDIS-GMLN29 yana bayyane don ku iya ganin fitilun LED don tabbatar da gane maɓallin. Tukwici: Ana bada shawarar kashe rediyo.
2. A cikin daƙiƙa ashirin na farko na kunna kunnawa, danna kuma ka riƙe maɓallin Ƙara-Up akan sitiyarin har sai LED ya yi ƙarfi.
3. Saki maɓallin Volume-Up, LED ɗin zai fita; Maballin Ƙarfafawa yanzu an tsara shi.
4. Bi jeri a cikin Maɓallin Ƙirar Maɓalli don yin la'akari da tsarin da ake buƙatar tsara maɓallan sarrafa sitiyari.
   Lura: Idan aiki na gaba a jerin ba ya kan sitiyari, danna maɓallin Ƙara-Up na (1) na biyu har sai LED ya kunna, sa'an nan kuma saki maɓallin Ƙara-Up. Wannan zai gaya wa AXDIS-GMLN29 cewa wannan aikin ba ya samuwa kuma zai ci gaba zuwa aiki na gaba.
5. Don kammala aikin sake taswira, danna kuma ka riƙe maɓallin Ƙarar-Up akan sitiyarin har sai LED a cikin AXDIS-GMLN29 ya fita.

Maballin Assignment Legend

1. Ƙarfafawa
2. Ƙarar-Ƙasa
3. Neman-Up/Na gaba
4. Neman-ƙasa/Mafi
5. Tushen/Yanayin
6. Yi shiru
7. Saita-Up
8. Saita-Ƙasa
9. Ƙarfi
10. Band
11. Kunna/Shiga
12. PTT (Tura don Magana) *
13. Kan-ƙugiya*
14. Kashe-ƙugiya*
15. Masoya*
16. Fan-Down*
17. Saurin Sauyi*
18. Sauƙaƙe *

* Ba a aiwatar da wannan aikace-aikacen ba

Lura: Ba duk rediyo za su sami duk waɗannan umarni ba. Da fatan za a koma zuwa littafin jagorar da aka bayar tare da rediyo, ko tuntuɓi masana'antun rediyo don takamaiman umarni da waccan rediyo ta gane.

Umarnin Aiwatar da Dual (Long Button Press)
AXDIS-GMLN29 yana da ikon sanya ayyuka (2) zuwa maɓalli guda ɗaya, ban da ƙarar ƙara da ƙarar ƙasa. Bi matakan da ke ƙasa don tsara maɓallin (s) don jin daɗin ku.

Lura: Neman-Up da Neman-Down sun zo da shirye-shiryen da aka riga aka tsara azaman Saita-Up da Saita-ƙasa don dogon latsa maɓallin.

1. Kunna wuta amma kar a tada abin hawa.
2. Latsa ka riže žasa maɓallin sarrafa sitiyari wanda kake son sanya dogon aikin latsawa zuwa kusan daƙiƙa 10, ko har sai LED ɗin yayi walƙiya da sauri. A wannan lokacin saki maɓallin; LED din zai tafi da karfi.
3. Latsa ka saki maɓallin Ƙarar-Ƙara adadin lokutan da suka yi daidai da sabuwar lambar maɓallin da aka zaɓa. Koma zuwa Legend Assignment Dual. LED ɗin zai yi walƙiya da sauri yayin da ake danna maɓallin Ƙara-Up, sannan komawa zuwa ingantaccen LED da zarar an saki. Je zuwa mataki na gaba da zarar an danna maballin Ƙarar Ƙarar adadin lokutan da ake so.
4.  Don adana dogon latsa maɓallin a ƙwaƙwalwar ajiya, danna maɓallin da kuka sanya dogon latsa maɓallin (maɓallin da ke ƙasa a Mataki na 2). LED ɗin yanzu zai kashe yana nuna sabon bayanin an adana shi.

Labari na Ayyuka Biyu

1. Ba a yarda ba
2. Ba a yarda ba
3. Neman-Up/Na gaba
4. Neman-ƙasa/Mafi
5. Yanayin/Madogararsa
6. ATT / Yi shiru
7. Saita-Up
8. Saita-Ƙasa
9. Ƙarfi
10. Band
11. Kunna/Shiga
12. Kan-ƙugiya
13. Kashe-ƙugiya
14. Masoya*
15. Fan-Down*
16. Saurin Sauyi*
17. Sauƙaƙe *
18. PTT*

Ba a aiwatar da wannan aikace-aikacen ba

Tsanaki: Idan sama da dakika 10 suka wuce tsakanin latsa maballin Ƙarfafawa, wannan hanya za ta ƙare, kuma LED ɗin zai fita.

Lura: Dole ne a maimaita waɗannan matakan don kowane maɓalli da kuke son sanya fasalin manufa biyu. Don sake saita maɓalli zuwa tsohuwar yanayinsa, maimaita Mataki na 1, sannan danna maɓallin ƙara-ƙasa. LED ɗin zai fita, kuma za a goge dogon taswirar latsa maballin.

CUTAR MATSALAR

Sake saitin AXDIS-GMLN29

1. Maɓallin sake saiti mai shuɗi yana cikin mahaɗin, tsakanin mahaɗa biyu. Maɓallin yana samuwa a waje da ke dubawa, babu buƙatar buɗe mai dubawa.
2. Latsa ka riƙe maɓallin sake saiti na tsawon daƙiƙa biyu, sannan bari ka je don sake saita mu'amala.
3. Koma zuwa sashin shirye-shirye daga wannan batu.

Samun matsaloli? Mun zo nan don taimakawa.

• Tuntuɓi layin Tallafin Fasaha a
• 386-257-1187
• Ko ta hanyar imel a
• techsupport@metra-autosound.com

Sa'o'in Tallafi na Fasaha (Lokacin Daidaita Gabas)

• Litinin - Juma'a: 9:00 na safe - 7:00 na yamma
• Asabar: 10:00 na safe - 5:00 na yamma
• Lahadi: 10:00 na safe - 4:00 na yamma

Metra yana ba da shawarar ƙwararrun masu fasaha na MECP

Takardu / Albarkatu

AXXESS AXDIS-GMLN29 Data Interface tare da SWC [pdf] Jagoran Shigarwa AXDIS-GMLN29, AXDIS-GMLN29 Data Interface tare da SWC, Data Interface tare da SWC, Interface tare da SWC, SWC

Magana

• Manual mai amfani