ArcPixel Power Controller
Jagoran Jagora 
UMARNIN SHIGA
ARCPIXEL POWER
Lambar QR don Umarnin Shigarwa
https://www.anolislighting.com/resource/arcpixel-power-installation-instructions
ArcPixel Power Controller
Dole ne ƙwararren ma'aikacin lantarki ya shigar da naúrar daidai da duk ƙa'idodin lantarki da na gida da na ƙasa. Wannan na'urar tana ƙarƙashin aji I kuma dole ne ta kasance ƙasa! 
MATAKI NA 1
ARCPIXEL POWER INSTALLATION
Yi amfani da kayan ɗamara waɗanda suka dace don amfani tare da saman hawan ku.
Haɗa ƙarfin ArcPixel zuwa sama ta ramukan hawa huɗu da sukurori huɗu.
MATAKI NA 2
ARCPIXEL POWER CONNECTION
Gefen baya view - 4x ArcDot fitarwa, 4x ArcPix fitarwa, Ethernet, DMX OUT da DMX IN
Gefen gaba view – Shigarwar Wuta
Matsakaicin tsayi tsakanin ArcPixel Power da na ƙarshe dole ne ya wuce mita 100. Kar a haɗa ko cire haɗin samfuran LED lokacin da ArcPixel Power ke ƙarƙashin voltage. Idan an katse layin kayan aiki, kashe wutar ArcPixel kafin maido da haɗin.
2A Haɗin ArcDot
Ana iya yin layin ArcDot tare da haɗin ciki/ fita ko ta amfani da masu haɗin T (1 ArcDot ana iya haɗa shi da mai haɗin T). Max. adadin ArcDots a kowace fitarwa shine 35. Max. Tsawon kebul na fitowar LED 1 shine 65m a 35 ArcDots da 100m a 25 ArcDots ta fitowar LED.
A farkon kowane layin fitarwa dole ne a shigar da ferrite kuma dole ne a shigar da mai aiki a ƙarshen layin don ƙarawa. Dole ne a maye gurbin mai aiki mai aiki da mai ƙarewa lokacin da aka yi magana.
2B ArcPix II haɗi
Ferrite tace umarnin aikace-aikacen:
Ferrite mai juyi ɗaya na kebul ɗin lebur ɗin da ke kewaye da shi (kimanin 100mm na USB) dole ne a sanya shi a farkon kowane layin fitarwa na ArcPix II. Ferrite ba tare da kebul ya juya ba dole ne a sanya shi bayan kowane ArcPix II na talatin na layin fitarwa kafin hawa shi zuwa saman. (misali jimlar ferrite 4 cikin layi na 100 ArcPixes II) Kowane layin ArcPix II dole ne a ƙare tare da akwatin ƙarewa ArcPix.
Shigar da katangar tasha zuwa kebul mai laushi na layin ArcPix II kuma haɗa shi zuwa fitowar wutar ArcPixel.
Max. kaya a kowace fitarwa shine 100 ArcPixes II da max. Tsawon layin fitarwa shine 100m.
ROBE lighting sro
Palakeho 416
757 01 Valasske Mezirici
Jamhuriyar Czech
Lambar waya: +420 571 751 500
Imel: info@anolis.eu
www.anolislighting.com
NA 2.0 / 2_2023
Takardu / Albarkatu
 |
Anolis ArcPixel Power Controller [pdf] Jagoran Jagora ArcPixel, ArcPixel Power Controller, Power Controller, Controller |
 |
Anolis ArcPixel Power Controller [pdf] Manual mai amfani ArcPixel Mai Kula da Wutar Lantarki, ArcPixel, Mai Kula da Wuta, Mai Sarrafa |
