JBL 1500 ARRAY Project Subwoofer

Bayanin samfur

Ƙayyadaddun bayanai

• Samfura: Tsarin aikin
• Nau'in: lasifika
• Zane: Modular
• Abubuwan Tsari: 5

Bayani

An ƙera lasifika na Project Array na JBL don haɓakar sauti mai girma. Sun dace da aikace-aikace daban-daban, gami da sitiriyo na tashoshi biyu masu ƙima da saitin gidan wasan kwaikwayo na tashoshi da yawa. Jerin ya ƙunshi abubuwa biyar na tsarin.

Haɗe da Na'urorin haɗi

• Don 1400 Array: 2 Dogon 1/4 x 20 Allen-head bolts, 1 Short 1/4 x 20 Allen-head bolts, 1 Logo farantin, 1 Allen-head screwdriver, 1 Rubber rami toshe, 4 Metal coasters (don kare bene daga kafafu masu zube)
• Domin 1000 Array, 800 Array, da 1500 Array: 4 Metal coasters (don kare bene daga spiked ƙafa)

Kariyar Tsaro

Da fatan za a karanta matakan tsaro masu zuwa kafin amfani da samfurin:

• Tsanaki: Don rage haɗarin girgizar lantarki, kar a cire murfin ko bayan samfurin. Babu sassan da za a iya amfani da su a ciki. Koma hidima ga ƙwararrun ma'aikatan sabis.
• Tsanaki: Kada a yi amfani da filogi mai ƙarfi tare da igiya mai tsawo, ma'auni, ko wata hanyar fita sai dai idan za'a iya shigar da ruwan wukake don hana bayyanar ruwa da girgiza wutar lantarki.
• Gargadi: Walƙiya mai walƙiya tare da alamar kibiya tana nuna gaban voltage cikin rumbun samfurin, wanda zai iya haifar da girgiza wutar lantarki.
• Gargadi: Ma'anar faɗa a cikin madaidaicin alwatika yana nuna mahimman umarnin aiki da kulawa a cikin wallafe-wallafen da ke biye.

Sanya Mai Magana

Tsarin Tashoshi

• Masu magana na gaba: Sanya masu lasifikan gaba a nisa ɗaya daga juna kuma daga wurin sauraro. Masu tweeters yakamata su kasance kusan tsayi ɗaya da kunnuwa masu sauraro.
• Kakakin Channel Channel: Sanya mai magana ta tsakiya a ƙasan talabijin kuma bai wuce ƙafa biyu a ƙasa da tweeters na hagu da dama masu magana ba.
• Masu Magana Kewaye: Da kyau, sanya masu lasifikan da ke kewaye biyu kadan a bayan wurin saurare, suna fuskantar juna. Idan hakan bai yiwu ba, ana iya sanya su a bangon bayan wurin sauraron, suna fuskantar gaba. Gwaji tare da sanya su har sai kun sami sauti mai yaduwa, sautin yanayi tare da babban kayan shirin da aka ji a gaban masu magana. Bai kamata masu magana da ke kewaye su kula da kansu ba.

Tambayoyin da ake yawan yi (FAQ)

• Q: Ta yaya zan kare benena daga zuriyar ƙafafu na
  masu magana?
• A: Don wasu nau'ikan benaye, irin su katako, zaku iya amfani da ƙwanƙolin ƙarfe da aka haɗa tsakanin ƙafar ƙafa da bene don hana lalacewa.
• Q: A ina zan iya rijistar samfur na?
• A: Kuna iya yin rijistar samfurin ku akan JBL websaiti a www.jbl.com. Rijista samfurin ku yana ba ku damar karɓar sabuntawa akan sabbin ci gaba kuma yana taimaka wa kamfani mafi fahimtar buƙatun abokin ciniki da tsammanin.

KARANTA FARKO

Muhimman Kariyar Tsaro!

HANKALI

ILLAR HUKUNCIN LANTARKI BA YA BUDE

HANKALI: Don rage haɗarin girgiza wutar lantarki, kar a cire murfin (ko baya). Babu sassa masu amfani a ciki. Koma hidima ga ƙwararrun ma'aikatan sabis.

HANKALI: Don hana girgiza wutar lantarki, kar a yi amfani da wannan filogi (polarized) tare da igiya mai tsawo, rumbun ko wata hanyar fita sai dai idan za a iya shigar da ruwan wukake don hana fallasa ruwan wuka.

 

• Walƙiya mai walƙiya tare da alamar kibiya, a cikin madaidaicin alwatika, an yi niyya ne don faɗakar da mai amfani da kasancewar "mummunan volley" marar lahani.tage” a cikin shingen samfurin wanda zai iya zama isashen girma don zama haɗarin girgizar lantarki ga mutane.
• Wurin faɗakarwa a cikin madaidaicin alwatika an yi niyya don faɗakar da mai amfani game da kasancewar mahimman umarni na aiki da kiyayewa (sabis) a cikin wallafe-wallafen da ke tare da na'urar.

1. Karanta waɗannan umarnin.
2. A kiyaye waɗannan umarnin.
3. Ku kula da duk gargaɗin.
4. Bi duk umarnin.
5. Kar a yi amfani da wannan na'urar kusa da ruwa.
6. Tsaftace kawai da bushe bushe.
7. Kada a toshe kowane buɗewar samun iska. Shigar daidai da umarnin masana'anta.
8. Kada a shigar kusa da kowane tushen zafi kamar radiators, rajistan zafi, murhu ko wasu na'urori (ciki har da amplifiers) masu samar da zafi.
9. Kar a kayar da manufar aminci na filogi mai nau'in polarized ko ƙasa. Filogi na polarized yana da ruwan wukake guda biyu daya fadi fiye da ɗayan. Filogi mai nau'in ƙasa yana da ruwan wukake guda biyu da na ƙasa na uku. An tanadar da faffadan ruwa ko na uku don amincin ku. Idan filogin da aka bayar bai dace da mashin ɗin ku ba, tuntuɓi ma'aikacin wutar lantarki don maye gurbin mabuɗin da aka daina amfani da shi.
10. Kare igiyar wutar lantarki daga tafiya a kunne ko a matse ta, musamman a matosai, madaidaitan ma'auni da wurin da suke fita daga na'urar.
11. Yi amfani da haɗe-haɗe-haɗe-haɗe/na'urorin haɗi kawai da mai ƙira ya ƙayyade.
12. Yi amfani kawai tare da keken keke, tsayawa, tudu, sashi ko tebur wanda masana'anta suka ƙayyade ko aka sayar tare da na'ura. Lokacin da aka yi amfani da keken keke, yi taka tsantsan lokacin motsi haɗin keke/na'ura don guje wa rauni daga faɗuwa.
13. Cire wannan na'urar yayin guguwar walƙiya ko lokacin da ba a yi amfani da ita na dogon lokaci ba.
14.  Koma duk hidima ga ƙwararrun ma'aikatan sabis. Ana buƙatar sabis lokacin da na'urar ta lalace ta kowace hanya, kamar igiyar samar da wutar lantarki ko toshe ta lalace, ruwa ya zube ko abubuwa sun fada cikin na'urar, na'urar ta fallasa ruwan sama ko danshi, ba ya aiki yadda ya kamata. , ko kuma an jefar da shi.
15. Kada a yi amfani da haɗe-haɗe waɗanda masana'anta ba su ba da shawarar ba, saboda suna iya haifar da haɗari.
16. Ya kamata a sarrafa wannan samfurin daga nau'in tushen wutar lantarki da aka nuna akan alamar alama. Idan ba ku da tabbacin nau'in samar da wutar lantarki zuwa gidanku, tuntuɓi dillalin samfuran ku ko kamfanin wutar lantarki na gida. Don samfuran da aka yi niyyar yin aiki daga ƙarfin baturi ko wasu tushe, koma zuwa umarnin aiki.
17. Idan an haɗa eriyar waje ko tsarin kebul zuwa samfurin, tabbatar cewa eriya ko tsarin kebul ɗin yana ƙasa don samar da wasu kariya daga vol.tage hauhawa da ginanniyar cajin da aka gina. Mataki na 810 na Kundin Lantarki na Kasa, ANSI/NFPA 70, yana ba da bayanai game da ingantaccen ƙasa na mast ɗin da tsarin tallafi, ƙaddamar da wayan gubar zuwa naúrar fitar da eriya, girman masu sarrafa ƙasa, wurin da naúrar fitar da eriya take. , dangane da grounding lantarki, da kuma bukatun ga grounding lantarki. Duba Hoto A.
18.  Tsarin eriya na waje bai kamata ya kasance a kusa da layukan wuta na sama ko wasu hasken lantarki ko da'irar wutar lantarki ba, ko kuma inda zai iya fada cikin irin wannan wutar.
    Hoto A.
    ExampLe of Antenna Grounding kamar yadda National Electrical Code ANSI/NFPA 70Lines ko kewaye. Lokacin shigar da na'urar eriya ta waje, ya kamata a kula sosai don kiyayewa daga taɓa irin waɗannan layukan wutar lantarki ko da'irori, saboda haɗuwa da su na iya zama m.
19. Kar a yi lodin kantunan bango, igiyoyin tsawaitawa, ko ma'auni masu dacewa, saboda wannan na iya haifar da haɗarin gobara ko girgizar lantarki.
20. Kada a taɓa tura abubuwa kowane iri cikin wannan samfur ta hanyar buɗewa, saboda suna iya taɓa voltage maki ko gajeriyar sassa, wanda zai iya haifar da tashin gobara ko wutar lantarki. Kada a taɓa zubar da ruwa kowane iri akan samfurin.
21. Kada a fallasa na'urar ga ɗigowa ko fantsama, kuma babu wani abu da aka cika da ruwa, kamar vases, da za a sanya a kan na'urar.
22. Kada kayi ƙoƙarin yin sabis da wannan samfur da kanka, saboda buɗewa ko cire murfin na iya fallasa ka ga mai haɗari voltage ko wasu hadura. Koma duk hidima ga ƙwararrun ma'aikatan sabis.
23. Lokacin da ake buƙatar ɓangarorin musanyawa, tabbatar da ma'aikacin sabis ya yi amfani da ɓangarorin maye gurbin da masana'anta suka ayyana ko waɗanda ke da halaye iri ɗaya da ɓangaren asali. Sauye-sauye mara izini na iya haifar da wuta, girgiza wutar lantarki ko wasu haɗari.
24. Bayan kammala kowane sabis ko gyare-gyare ga wannan samfur, tambayi ma'aikacin sabis don yin binciken aminci don sanin cewa samfurin yana cikin yanayin aiki mai kyau.
25. Ya kamata a ɗora samfurin zuwa bango ko rufi kawai kamar yadda masana'anta suka ba da shawarar.

NAGODE DA ZABI JBL®

Fiye da shekaru 60, JBL yana shiga kowane fanni na kiɗa da rikodin fim da haifuwa, tun daga wasan kwaikwayon kai tsaye zuwa rikodin da kuke kunnawa a cikin gidanku, motarku ko ofis. Muna da tabbacin cewa tsarin JBL da kuka zaɓa zai ba da kowane bayanin jin daɗin da kuke tsammani - kuma lokacin da kuke tunanin siyan ƙarin kayan aikin sauti don gidanku, motarku ko ofis ɗinku, zaku sake zaɓar JBL. Da fatan za a ɗauki ɗan lokaci don yin rajistar samfuran ku akan mu Web saiti a www.jbl.com. Yana ba mu damar ci gaba da buga ku akan sabbin abubuwan ci gabanmu kuma yana taimaka mana don ƙarin fahimtar abokan cinikinmu da gina samfuran da suka dace da buƙatu da tsammaninsu. JBL Kayayyakin Masu Amfani

PROJECT ARRAY™

Lasifikar Array Project ƙirar ƙira ce mai girman gaske da aka yi niyya don amfani da ke kama daga sitiriyo na tashoshi biyu zuwa aikace-aikacen gidan wasan kwaikwayo na tashoshi da yawa. Silsilar na zamani ce kuma ta ƙunshi abubuwa biyar na tsarin:

• 1400 Array - bene
• 1000 Array - bene
• 800 Array - kantin sayar da littattafai
• 880 Array - tashar tsakiya
• 1500 Array - subwoofer mai ƙarfi

HADA

• 1400 tsarin
• 2 Dogon 1/4 "x 20 Allen-head bolts 1 Short 1/4" x 20 Allen-head bolts 1 Logo farantin
• 1 Allen-head screwdriver
• 1 toshe rami na roba
• 4 Metal coasters (don kare bene daga spiked ƙafa)

1000 Array, 800 Array da 1500 Array

• 4 Metal coasters (don kare bene daga spiked ƙafa)

WURIN MAGANA

MUHIMMAN NOTE: Samfuran 800, 1000, 1400 da 1500 Array suna da ƙafafu masu zube don ingantaccen aikin ƙara sauti. Koyaya, spikes na iya lalata wasu nau'ikan benaye, kamar katako. A irin waɗannan lokuta, wurin ya haɗa da ƙwanƙwasa ƙarfe

tsakanin ƙafãfunsu spiked da bene.

TSARIN CHANNEL

1. Masu Magana Gaba
2. Mai magana da tashar tashar ta tsakiya

Kewaye Speakers

Ya kamata a sanya masu magana na gaba nisa daidai da juna kamar yadda suke daga wurin sauraro, tare da tweeters a kusan tsayi ɗaya daga bene kamar yadda kunnuwa masu sauraro za su kasance. Ya kamata a sanya mai magana ta tsakiya a ƙasan talabijin kuma bai wuce ƙafa biyu a ƙasa da tweeters na hagu da dama masu magana ba. Ya kamata a sanya lasifikan da ke kewaye biyu a baya kadan a bayan wurin sauraron kuma, a dace, su fuskanci juna. Idan hakan ba zai yiwu ba, ana iya sanya su a bangon bayan wurin sauraron, suna fuskantar gaba. Bai kamata masu magana da ke kewaye su kula da kansu ba. Gwaji tare da sanya su har sai kun ji sauti mai yaduwa, na yanayi tare da babban kayan shirin da aka ji a gaban masu magana. Ƙananan mitar kayan da subwoofer ya sake bugawa shine yawanci gabaɗaya, kuma ana iya sanya wannan lasifikar a wuri mai dacewa a cikin ɗakin. Koyaya, mafi kyawun haifuwa na bass za a ji lokacin da aka sanya subwoofer a cikin kusurwa tare da bango ɗaya kamar masu magana da gaba. Gwaji tare da sanya subwoofer ta hanyar sanya subwoofer na ɗan lokaci a cikin wurin sauraro da motsawa cikin ɗakin har sai haifuwar bass ya fi kyau. Sanya subwoofer a wannan wurin.

TSARIN CHANNEL

Tsarin tashar tashoshi 6.1 zai ƙunshi daidaitawar tashar tashoshi 5.1, kamar yadda aka nuna a shafi na 4, tare da ƙari na mai magana na tsakiya wanda aka sanya tsakiyar tsakiyar lasifikan da ke kewaye biyu, kuma gaba zuwa baya fiye da kewaye. Mai magana da baya bai kamata ya kula da kansa fiye da masu magana da ke kewaye ba.

TSARIN CHANNEL

Wasu sabbin tsarin sauti na kewaye suna amfani da tashoshi na kewaye hagu da dama waɗanda ake amfani da su don cika gefe, baya ga tashoshi na hagu da dama na baya da aka samu a cikin tsarin 5.1. Sanya lasifikan da ke kewaye da hagu da dama a gefen ɗakin, a ko a gaban wurin sauraron, suna fuskantar juna.

MAJALIYYA

1400 ARRAY Majalisar

Saboda nauyin nauyin ƙaho na 1400 Array, an cushe shi daban daga maƙallan ƙananan mitoci. Hanya ce mai sauƙi don shigar da tsarin, kuma an jera umarnin da ake buƙata a ƙasa. Screwdriver da ake buƙata na Allen an haɗa shi a cikin fakitin kayan haɗi.

1. Cire tsarin ƙahon a hankali daga marufi kuma sanya shi fuskantar ƙasa akan ƙasa mai laushi.
2. Nemo hannun kayan haɗi na kwali kuma cire kayan aikin.
3. Hannun kayan haɗi yakamata ya ƙunshi:
   • 2 Dogon 1/4 "x 20 Allen-head kusoshi
   • 1 Short 1/4 "x 20 Allen-head kusoshi
   • 1 Logo farantin
   • 1 toshe rami na roba
   • 4 Metal coasters (don kare itace da benaye daga karukan ƙafafu)
4. A hankali kwance marufin ƙananan mitoci kuma sanya shi a tsaye. Zai zama taimako don sanya shi kusa da matsayinsa na ƙarshe a cikin ɗakin tun yana da sauƙin motsawa ba tare da ƙarin nauyin ƙaho ba.
5. Yi la'akari da abubuwan da aka sanya zaren guda biyu a kan kusurwar kusurwar saman da kuma ƙaramin maƙallan L a saman. Waɗannan su ne abubuwan haɗin kai don ƙirar ƙaho. Nan da nan kusa da sashin L-bracket shine haɗin da aka dakatar wanda zai yi haɗin lantarki don ƙirar ƙaho.
6. Ko da yake mutum ɗaya na iya shigar da tsarin, yana da sauƙi idan akwai saitin hannaye na biyu.
7. Jaro ƙirar ƙaho tare da buɗewa tare da hannunka kuma, ta yin amfani da hannun kyauta, haɗa filogi da ke fitowa daga ƙasan taron ƙahon zuwa jack ɗin da ke saman shingen.
8. Yanzu zaku iya sanya ƙahon a matsayi a saman shingen. Bakin L ya dace a cikin buɗewa ƙarƙashin taron ƙaho. Tsarin zai zauna a saman shingen-tabbatar da kansa, ko da yake ya kamata a tsaya a koyaushe har sai an cika shi sosai.
9. Yi layi ramukan hawa biyu a kan ƙananan leɓe na gaban ƙaho tare da waɗanda ke cikin shinge. Partiyan shigar da dogon gunki ɗaya sannan ɗayan. Yana iya zama larura a ɗaga ƙahon kaɗan don ƙullun su shigar da kyau. Kar a tilasta su ko a ƙetare su.
10. Da zarar an fara kusoshi biyu, yi aiki da su gabaɗaya, amma kar a ƙarfafa su har yanzu.
11. Shigar da sauran guntun guntun a cikin rami a ƙarshen ƙarshen ƙaho. Kuna iya ƙara wannan kullin.
12. Yanzu gaba ɗaya ƙara maƙallan gaba biyu.
13. Komai ya kamata ya kasance mai tsauri kuma ya daidaita daidai a wannan lokacin. Idan ba haka ba, sassauta, sake daidaitawa, kuma ja da baya kamar yadda ake buƙata.
14. Matakai na ƙarshe shine cire goyan baya daga alamar tambarin kuma sanya shi a cikin wurin hutawa akan leɓen ƙaho na ƙasa, da kuma amfani da filogin ramin roba don ɓoye ramin a ƙasan baya na ƙaho. Kar a kammala waɗannan matakan har sai an kunna tsarin kuma an gwada su da murya. Tabbatar cewa ƙaho na fara kunnawa. Da zarar an shigar da alamar tambari da ramukan filogi na roba, yana da matukar wahala a cire su.

HANYOYIN MAGANA

Gudanar da Subwoofer da Haɗin kai (Tsarin Tsari 1500 Kawai)

1. Shigar da Matsayin Layi
2. Fitowar Matsayi-Layi
3. Alamar Wuta
4. Matsayin Subwoofer (Ƙarar) Sarrafa ∞ Daidaita Juyawa
5. Sauya Mataki
6. Mai Zabin LP/LFE
7. Kunnawa/Kashewa ta atomatik
8. Canjin Wuta

Haɗin kai:
Idan kana da Dolby® Digital ko DTS® mai karɓa/mai sarrafawa tare da ƙananan sakamako-sakamako (LFE), saita canjin LFE/LP zuwa LFE. Idan kun fi son yin amfani da giciye da aka gina a cikin 1500 Array, saita Canjawar LFE/LP ku LP.

Tsarin 1500 ya haɗa da fitarwar layi. Wannan fitarwa yana ba ku damar "sarkar daisy" ɗaya 1500 Array zuwa mahara 1500 Array subwoofers. Kawai haɗa subwoofer na farko kamar yadda aka bayyana a sama sannan kuma gudanar da kebul na subwoofer daga fitowar layi (s) zuwa shigar da layi akan subwoofer na gaba.

AIKI

1500 ARRAY AIKIN

Kunna wuta

Toshe igiyar AC na subwoofer ɗin ku cikin mashin bango. Kada a yi amfani da kantunan da ke bayan mai karɓa. Da farko saita Matsayin Subwoofer (Volume) Control zuwa matsayin "min". Kunna sub ɗin ku ta latsa maɓallin wuta a baya panel.

Kunna/A jiran aiki ta atomatik Tare da Power Switcha cikin "akan" matsayi, LED Indicator zai kasance mai haske a ja ko kore don nuna yanayin Kunna/Ayi jiran aiki na subwoofer.

• JAN = TSAYE (Ba a gano sigina ba, Amp A kashe)
• GREEN = ON (An gano sigina, Amp Kunna)

Subwoofer zai shiga yanayin jiran aiki ta atomatik bayan kusan mintuna 10 lokacin da ba a gano sigina daga tsarin ku ba. Subwoofer zai kunna kunna kai tsaye lokacin da aka gano sigina. A lokutan amfani na yau da kullun, Canjin Wutaza a iya barin. Kuna iya kashe wutar lantarki na tsawon lokacin rashin aiki, misali, lokacin da ba ku da hutu. Idan Canjawa ta atomatik yana cikin "akan" matsayi, subwoofer zai kasance a kunne.

Daidaita Matsayi Kunna tsarin sautin ku gaba ɗaya kuma fara CD ko sautin sautin fim a matsakaicin matakin. Ƙaddamar da Ƙwararrun Matakin Subwoofer (Ƙarar). kusan rabin hanya. Idan babu sautin da ya fito daga subwoofer, duba igiyar layin AC da igiyoyin shigarwa. Shin masu haɗin kan igiyoyin suna yin tuntuɓar da ta dace? Ana haɗa filogin AC zuwa ma'ajiyar "rayuwa"? Yana da Power Switch an danna zuwa wurin "kunna"? Da zarar kun tabbatar cewa sub-woofer yana aiki, ci gaba ta kunna CD ko fim. Yi amfani da zaɓin da ke da ampda bass bayanai.
Saita gabaɗayan sarrafa ƙarar na gabaamplifi ko sitiriyo zuwa matakin dadi. Daidaita Matsayin Subwoofer (ƙarar) Sarrafa har sai kun sami cakuda bass mai daɗi. Amsar bass bai kamata ya yi ƙarfin ƙarfin ɗakin ba amma yakamata a daidaita shi don a sami haɗuwa mai jituwa a duk faɗin kiɗan. Yawancin masu amfani suna da hali don saita ƙarar subwoofer da ƙarfi sosai, suna bin imani cewa subwoofer yana can don samar da bass da yawa. Wannan ba gaskiya bane gaba ɗaya. Subwoofer yana can don haɓaka bass, yana ba da amsa ga tsarin gabaɗayan don haka bass za a iya ji da kuma ji. Koyaya, dole ne a kiyaye ma'auni gabaɗaya ko kiɗan ba zai yi sautin yanayi ba. Gogaggen mai sauraro zai saita ƙarar sub-woofer don haka tasirinsa akan amsawar bass koyaushe yana nan amma ba zai yuwu ba.
Canje-canjen Gyara

NOTE: Wannan iko ba zai yi tasiri ba idan LP/LFE Selector Switch an saita zuwa "LFE." Idan kana da Dolby Digital ko DTS processor/receiver, Crossover Frequency an saita ta processor/mai karɓa. Tuntuɓi littafin mai gidan ku don koyon yadda ake view ko canza wannan saitin. Gudanar da Daidaitawar Crossover Yana ƙayyade mafi girman mita inda subwoofer ke sake yin sauti. Idan manyan lasifikan ku na iya sake yin wasu ƙananan sautuka cikin nutsuwa, saita wannan iko zuwa ƙaramin mitar mitar, tsakanin 50Hz da 100Hz. Wannan zai mayar da hankali kan ƙoƙarin subwoofer akan sautin bass ultradeep da ake buƙata ta fina-finai da kiɗan yau. Idan kana amfani da ƙananan lasifikan kantin littattafai waɗanda ba su wuce zuwa ƙananan mitoci ba, saita Ikon Daidaitawa na Crossover zuwa wuri mafi girma, tsakanin 120Hz da 150Hz.

Sarrafa lokaci

Canjin Mataki yana ƙayyade ko aikin piston mai magana na subwoofer yana motsawa ciki da waje tare da manyan lasifika (0˚) ko akasin manyan masu magana (180˚). Daidaita lokaci mai dacewa ya dogara da sauye-sauye da yawa, kamar su sanya subwoofer da matsayi na sauraro. Daidaita Canjin lokaci don ƙara girman fitowar bass a wurin sauraro.

BAYANIN HADIN GABA ɗaya

Ware da tube iyakar waya ta lasifikar (ba a kawota ba) kamar yadda aka nuna. Masu magana da tashoshi na lantarki suna da madaidaicin (+) da (-) tashoshi. Yawancin masu kera lasifika da na'urorin lantarki, gami da JBL, suna amfani da ja don nuna alamar (+) da baki ga tashar (-). Ana lura da gubar (+) na wayar lasifikar wani lokaci tare da ɗigon ruwa ko wani shatanci. Yana da mahimmanci a haɗa masu magana biyu iri ɗaya: (+) akan lasifikar zuwa (+) akan amplifier da (-) akan lasifikar zuwa (-) akan amplififi. Wayar da waya "daga lokaci" yana haifar da sautin bakin ciki, bass mai rauni da mummunan hoton sitiriyo. Tare da zuwan tsarin sauti masu yawa da ke kewaye, haɗa dukkan lasifikan da ke cikin tsarin ku tare da madaidaicin polarity ya kasance daidai da mahimmanci don adana yanayi mai kyau da jagorar kayan shirin.

FARJI FARKO

MUHIMMI: Tabbatar cewa an kashe duk kayan aiki kafin yin kowane haɗi.

Don haɗin lasifika, yi amfani da waya mai inganci mai inganci tare da coding polarity. Gefen waya tare da tudu ko wasu coding yawanci ana ɗaukar tabbataccen polarity (+).
NOTE: Idan ana so, tuntuɓi dillalin JBL na gida game da wayar lasifikar da zaɓuɓɓukan haɗi. Masu lasifikan suna da tashoshi masu lamba waɗanda ke karɓar nau'ikan haɗin waya iri-iri. Ana nuna haɗin da aka fi sani a hoto 1.
Don tabbatar da ingantacciyar polarity, haɗa kowane + tasha a bayan gidan amplifi ko mai karɓa zuwa madaidaicin + (ja) akan kowane lasifika, kamar yadda aka nuna a hoto 2. Haɗa tashoshi – (baƙi) ta hanya iri ɗaya. Duba jagororin mai shi waɗanda aka haɗa tare da naku amplifier, mai karɓa da talabijin don tabbatar da hanyoyin haɗi. MUHIMMI: Kada a juya polarities (watau, + zuwa - ko - zuwa +) lokacin yin haɗi. Yin hakan zai haifar da rashin kyawun hoto da raguwar amsawar bass..

GYARAN KARSHE

Bincika lasifikan don sake kunnawa, da farko ta saita ikon sarrafa ƙarar tsarin zuwa ƙaramin matakin, sannan ta amfani da iko akan tsarin sautin ku. Kunna kiɗan da aka fi so ko ɓangaren bidiyo kuma ƙara sarrafa ƙarar tsarin zuwa matsayi mai daɗi.
NOTE: Ya kamata ku ji daidaitattun haifuwar sauti a duk faɗin mitar. Idan ba haka ba, duba duk hanyoyin haɗin waya ko tuntuɓi dillalin JBL mai izini wanda kuka sayi tsarin don ƙarin taimako. Duka adadin bass ɗin da kuke ji da ingancin sitiriyo-hoton abubuwa da yawa za su shafi abubuwa daban-daban, ciki har da girman ɗakin da siffarsa, kayan gini da ake amfani da su don gina ɗakin, matsayin mai sauraro dangane da masu magana, da matsayi. na masu magana a cikin dakin. Saurari zaɓin kiɗa iri-iri kuma lura da matakin bass. Idan akwai bass da yawa, matsar da lasifikan daga bangon da ke kusa. Akasin haka, idan kun sanya masu magana kusa da bango, za a sami ƙarin fitarwar bass Kusa da ke nuna saman na iya yin illa ga ingancin sitiriyo. Idan wannan ya faru, gwada karkatar da lasifika kaɗan zuwa cikin wurin sauraron har sai an sami kyakkyawan sakamako.

KULA DA TSARIN MAGANAR KU

Kowane shingen Array na Project yana da ƙarewa wanda baya buƙatar kowane babban hayar kuɗi na yau da kullun. Lokacin da ake buƙata, yi amfani da zane mai laushi don cire duk wani yatsa ko ƙura daga wurin yawo ko gasa. NOTE: Kada a yi amfani da kowane kayan tsaftacewa ko goge a kan ma'ajiya ko gasa.

CUTAR MATSALAR

Idan babu sauti daga ɗaya daga cikin masu magana:

• Duba cewa mai karɓa/amplifier yana kunne kuma tushen yana wasa.
• Duba duk wayoyi da haɗin kai tsakanin mai karɓa/ampmasu zazzagewa da masu magana. Tabbatar an haɗa duk wayoyi. Tabbatar cewa babu ɗaya daga cikin wayoyi masu magana da ya lalace, yanke ko huda.
• Review aikin da ya dace na mai karɓar ku/ampmai sanyaya wuta.

Idan babu sauti da ke fitowa daga mai magana ɗaya:

• Duba ikon "Balance" akan mai karɓar ku/ampmai sanyaya wuta.
• Duba duk wayoyi da haɗin kai tsakanin mai karɓa/ampmasu zazzagewa da masu magana. Tabbatar an haɗa duk wayoyi. Tabbatar cewa babu ɗaya daga cikin wayoyi masu magana da ya lalace, yanke ko huda.
• A cikin yanayin Dolby Digital ko DTS, tabbatar da cewa an daidaita mai karɓar / mai sarrafawa domin an kunna lasifikar da ake tambaya.

Idan babu sauti daga tsakiyar lasifikar:

• Duba duk wayoyi da haɗin haɗin kai tsakanin mai karɓa/amplifi da lasifika. Tabbatar cewa an haɗa duk wayoyi. Tabbatar cewa babu ɗaya daga cikin wayoyi masu magana da ya lalace, yanke ko huda.
• Idan an saita mai karɓar mai sarrafa ku a yanayin Dolby Pro Logic®, tabbatar cewa lasifikar tsakiya baya cikin yanayin fatalwa.
• Idan an saita mai karɓar / mai sarrafa ku a yanayin Dolby Digital ko DTS, tabbatar an saita mai karɓa/masu sarrafa don kunna cibiyar magana.

Idan tsarin yana wasa a ƙananan ƙira amma yana kashewa yayin da aka ƙara ƙara:

• Duba duk wayoyi da haɗin kai tsakanin mai karɓa/ampmasu zazzagewa da masu magana. Tabbatar an haɗa duk wayoyi. Tabbatar cewa babu ɗaya daga cikin wayoyi masu magana da ya lalace, yanke ko huda.
• Idan ana amfani da manyan lasifika sama da ɗaya, duba mafi ƙarancin buƙatun rashin ƙarfi na mai karɓar ku/ampmai sanyaya wuta.

Idan akwai ƙananan fitarwa (ko a'a) bass fitarwa (1500 Array):

• Tabbatar cewa haɗin haɗin hagu da dama "Masu-Speaker" suna da madaidaicin polarity (+ da -).
• Tabbatar cewa an toshe subwoofer a cikin tashar lantarki mai aiki.
• Tabbatar da Canjin Wuta yana kan.
• A cikin yanayin Dolby Digital ko DTS, tabbatar da an daidaita mai karɓar / na'ura mai sarrafawa ta yadda an kunna subwoofer da fitarwa na LFE.
• Daidaita Ikon Matsayin Subwoofer

Idan babu sauti daga masu magana da kewaye:

• Duba duk wayoyi da haɗin kai tsakanin mai karɓa/ampmasu zazzagewa da masu magana. Tabbatar an haɗa duk wayoyi. Tabbatar cewa babu ɗaya daga cikin wayoyi masu magana da ya lalace, yanke ko huda.
• Review aikin da ya dace na mai karɓar ku/amplifier da kewaye da siffofin sauti.
• Tabbatar cewa fim ɗin ko nunin TV ɗin da kuke kallo an yi rikodin su a yanayin sauti na kewaye. Idan ba haka ba, duba don ganin ko mai karɓar ku/amplifier yana da wasu hanyoyin kewaye da zaku iya amfani da su.
• A cikin yanayin Dolby Digital ko DTS, tabbatar an saita mai karɓar / mai sarrafa ku don kunna masu magana da kewaye.
• Review aikin na'urar DVD ɗinka da jaket ɗin DVD ɗinka don tabbatar da cewa DVD ɗin ya ƙunshi yanayin Dolby Digital ko DTS da ake so, kuma ka zaɓi yanayin da kyau ta amfani da menu na na'urar DVD da menu na diski na DVD.

BAYANI

Duk fasalulluka da ƙayyadaddun bayanai ana iya canzawa ba tare da sanarwa ba. JBL da Harman International alamun kasuwanci ne na Harman International Industries, Incorporated, rajista a Amurka da/ko wasu ƙasashe. Project Array, Pro Sound yazo Gida da SonoGlass alamun kasuwanci ne na Harman International Industries, Incorporated. Dolby da Pro Logic alamun kasuwanci ne na Laboratories Dolby. DTS alamar kasuwanci ce mai rijista ta DTS, Inc.

PRO SAUTI YAZO GIDA ™

• JBL Kayayyakin Masu Amfani, 250 Crossways Park Drive, Woodbury, NY 11797 USA 8500 Balboa Boulevard, Northridge, CA 91329 Amurka
• 2, hanya de Tours, 72500 Château du Loir, Faransa
• 516.255.4JBL (4525) (Amurka kawai) www.jbl.com
• © 2006 Harman International Industries, Incorporated. An kiyaye duk haƙƙoƙi. Sashe na 406-000-05331-E

Sanarwa Da Daidaitawa

1400 Array, 1000 Array, 800 Array, 880 Array

Mu, Harman Consumer Group International

• 2, hanya de Tours
• 72500 Château du Loir Faransa

ayyana cikin nasu alhakin samfuran da aka siffanta a cikin wannan jagorar mai shi sun bi ƙa'idodin fasaha:

• TS EN 61000-6-3: 2001
• TS EN 61000-6-1: 2001

Laurent Rault
Harman Consumer Group International Faransa 1/06

Sanarwa Da Daidaitawa

1500 Array (230V kawai)

Mu, Harman Consumer Group International

• 2, hanya de Tours
• 72500 Château du Loir Faransa

ayyana cikin nasu alhakin cewa samfurin da aka siffanta a cikin wannan jagorar mai shi ya dace da ƙa'idodin fasaha:

• EN 55013:2001+A1:2003
• EN 55020:2002+A1:2003
• TS EN 61000-3-2: 2000
• EN 61000-3-3:1995+A1:2001
• EN 60065: 2002

Laurent Rault
Harman Consumer Group International Faransa 1/06

Takardu / Albarkatu

JBL 1500 ARRAY Project Subwoofer [pdf] Littafin Mai shi 1500 ARRAY Project Subwoofer, 1500 ARRAY, Subwoofer Project, Subwoofer

Magana

• Manual mai amfani