ZYXEL NETWORKS RM-ZN-T1 Network Device Mounting Kit

Especificacións

• Modelo: RM-ZN-T1
• Vendedor: Zyxel Networks
• Modelos admitidos: USG Flex 100, USG Flex 100AX, USG Flex 100H, USG Flex 100HP, USG Flex 100W, USG Flex 50, USG Flex 50AX, USG Flex 50H, USG Flex 50HP
• Cor: Prata
• Dimensións (HxWxD): 44 x 483 x 217 mm / 1.73 x 19.00 x 8.54 polgadas

Instrucións de montaxe:

1. Unscrew the middle screw on the back of the appliance.
2. Slide your appliance through the front of the rack and secure it with one bolt.
3. Place the power supply on the rack and secure it with two zip ties.
4. Connect the power supply to the appliance and tie down the excess length to the rack with one zip tie.
5. Connect the appliance to the keystones using the supplied cables.
6. Tie the cables together using the Velcro strap.

Asegúrese de ventilación adecuada segundo as directrices do fabricante do aparello de rede.

Electrodoméstico non incluído.

MODELOS COMPATIBLES

• USG Flex 100
• USG Flex 100AX
• USG Flex 100H
• USG Flex 100HP
• USG Flex 100W
• USG Flex 50
• USG Flex 50AX
• USG Flex 50H
• USG Flex 50HP

COR
PRATA

DIMENSIÓNS

• (HxWxD)
  • 44 x 483 x 217 mm
  • 1.73 x 19.00 x 8.54 polgadas

INSTRUCCIÓNS DE MONTAXE

1. Unscrew the middle screw on the back of the appliance.
2. Slide your appliance through the front of the rack and secure it with one bolt.
3. Place the power supply on the rack and secure with two zip ties.
4. Connect the power supply to the appliance and tie down the exces lenght to the rack with one zip tie.
5. Connect the appliance to the keystones using the supplied cables.
6. Tie the cables together using the Velcro strap.

Asegúrese de ventilación adecuada segundo as directrices do fabricante do aparello de rede.

CONTIDO DO PAQUETE

• 1 Rackmount kit
• 1 Parafuso
• 3 lazos de cremallera
• 9 cables de categoría 6
• 2 correas de velcro

Electrodoméstico non incluído.

CONSIDER THE ENVIRONMENT,RECYCLE WHERE APPLICABLE

PREGUNTAS

Correo electrónico support@rackmount.it ou póñase en contacto co seu revendedor.

FAQ

Pregunta: Como podo obter apoio?

Resposta: Para obter asistencia, podes enviar un correo electrónico support@rackmount.it ou póñase en contacto co seu revendedor.

Documentos/Recursos

ZYXEL NETWORKS RM-ZN-T1 Network Device Mounting Kit [pdfManual do propietario USG Flex 100, USG Flex 100AX, USG Flex 100H, USG Flex 100HP, USG Flex 100W, USG Flex 50, USG Flex 50AX, USG Flex 50H, USG Flex 50HP, RM-ZN-T1 Network Device Mounting Kit, RM-ZN-T1, Network Device Mounting Kit, Device Mounting Kit, Mounting Kit

Referencias

• Manual de usuario