gats-LOGO

gats Bluetooth Remote Control

gats-Bluetooth-Remote-Control-PRODUCT

Bluetooth Remote Control Manual

The description of the remote control in this manual corresponds to the actual keys. Please read the instructions carefully and use the instructions correctly. Open the battery cover on the back of the remote control, insert the batteries in the correct polarity direction (+ to +,-to -), insert two batteries (1.5V M), and then dose the back cover.GATS TY 16J XSJ02A Bluetooth Remote ControlGATS - logo 2The product sends out a Bluetooth remote control pairing request. Press the menu and return button for more than 3 seconds to complete the remote control pairing, and then the Bluetooth remote control can be used normally. Key Description: Power: Turn on/off the product

  • Mute: turn on/off the sound function
  • Vol +/-: adjust the volume of the sound
  • Set up: Quickly call up the settings menu
  • Voice: input voice function (function requires product adaptation to use)
  • CH +/-: adjust analog/digital TV channels (functions need product adaptation to use)
  • Navigation keys (up/down/left/right): move through options and menus
  • OK key: confirm the selection
  • Menu: Enter the main menu or enter the menu on the playback interface
  • Homepage: Enter the main page
  • Back: Back to the previous level

Specifications

  • Working voltage: 3V Bluetooth
  • RF: 2402-2480MHz
  • Distance: 10m
  • Transmitting power: -4dBm
  • Environmental characteristics: -10°C-50°C
  • Size: 160mm*42mm*19.42mm
  • Model: TV-161-XS.102A
  • Brand: GATS

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to the rat: floor television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement 
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. The device can be used in portable exposure conditions without restriction. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution! Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

  • Product Name: Bluetooth Remote Control
  • Manufacturer: Chongqing GATS Technology Co., Ltd.
  • Compliance: Directive 2014/53/EU, UK Radio Equipment Regulations S1 2017 No.1206
  • Operating Frequency: BT LE 2402-2480 MHz (2.61dBm)

Frequently Asked Questions (FAQ)

Q: Can I use the Bluetooth Remote Control with multiple devices?
A: The Bluetooth Remote Control can typically be paired with multiple devices, but it depends on the specific model and compatibility. Refer to the user manual for instructions on how to pair with additional devices.

Q: How do I change the batteries in the remote control?
A: If the remote control uses batteries, refer to the user manual for instructions on how to access and replace the batteries. Ensure to use the correct type and size of batteries as recommended by the manufacturer.

Documents / Resources

gats Bluetooth Remote Control [pdf] Instructions
419-YD02, 419YD02, 2BKXC419-YD02, 2BKXC419YD02, Bluetooth Remote Control, Remote Control, Control, Remote

References

Leave a comment

Your email address will not be published. Required fields are marked *