Hydrawise Using the Bluetooth Remote Instructions

Using the Bluetooth Remote
To reduce maintenance time, eliminate having to return to the controller to manually start/stop zones when Wi-Fi is not present, and bypass the need for a SmartPort® and ROAM remote, add a WAND module to any X2TM controller. Then simply connect via Bluetooth® using the Hydrawise app! Hydrawise has a new Bluetooth Control screen that allows remote operation for manual single and all-zone run commands. This feature works up to 75′ (23 m) away from the controller location, providing easier zone diagnostics, winterization, and site maintenance.

Step 1 Sign in to your Hydrawise account.[] From the HOME screen, select the ( ) icon in the upper left, then BLUETOOTH CONTROL.

Step 2 Select the module listed from the WAND list. Select RESCAN if necessary.

Step 3 If your model phone asks for a PAIRING REQUEST, accept by selecting OK. Step 4 A 6-digit number will appear on the X2 controller. ENTER the full PIN here and select OK. .

Step 5 The REMOTE CONTROL feature will appear. The CONTROLLER STATUS will display any current zones running. Using the two drop-downs, you can select a SINGLE-ZONE or RUN ALL ZONES in sequential order. Enter a RUN TIME in minutes. Select START and the system will begin watering via Bluetooth connection.