Document

FUNSNAP Capture 2s Axis Gimbal User Guide
FUNSNAP Capture 2s Axis Gimbal

Charge

  • Charging:
    The battery Level Indicator flashes red.
    Charge
  • Fully Charged:
    The Battery Level Indicator turns solid green.
    Charge

Download Capture2 App

Scan the QR codes on the right side or search for “Capture2” on Google- Play/ App Store, then download and install it.

  • Google Play
    QR Code Icon
  • iOS
    QR Code Icon

Mount and Balance Your Phone Horizontally

  1.  Mounting and Balancing
  2.  Mounting and Balancing
  3. Mounting and Balancing
    Please fit one side of your mobile phone into the Mounting Slot.
    Please make sure the part with camera on the top side.
  4. Mounting and Balancing
  5.  Mounting and Balancing
  6.  Mounting and Balancing
  7.  Mounting and Balancing
  8. Mounting and Balancing
    Tips: If Your phone is too heavy to balanced by the adjustable arm, you can stick the counterweight on to the tilt motor.

Mount an Balanced Your Phone Vertically

  1.   Mounting and Balancing
  2.  Mounting and Balancing
  3.  Mounting and Balancing
  4.  Mounting and Balancing
  5. Mounting and Balancing
    Please make sure the part with camera on the right side.
  6.  Mounting and Balancing
  7.  Mounting and Balancing
  8.  Mounting and Balancing
  9.  Mounting and Balancing

Connect to Capture 2s

  1. Enable the Bluetooth on your mobile phone.
    Connect to Capture
  2. Long press the power button for 3 seconds to turn on the gimbal.
    Capture 2s app instructions
  3. Launch Capture2 App
    Capture 2s app instructions
  4. Follow the in-app instructions to Connect to Capture 2s.
    Capture 2s app instructions

Tips: After the above steps are completed, if you encounter problems, please refer to the troubleshooting guide on page 22 of the manual.

FUNSNAP Logo

 

Documents / Resources

FUNSNAP Capture 2s Axis Gimbal [pdf] User Guide
Capture 2s, Axis Gimbal, Capture 2s Axis Gimbal, Gimbal

Leave a comment

Your email address will not be published.