FTX YW05 Bluetooth Speaker User Manual

Using the supplied USB cable, connect the Type-C end of the USB
cable to the Type-C port (7) of the speaker; connect the other end
of the cable to the USB port of a PC or USB charger (5V, 1A, not
included).
The LED indicator(2) will light up red to indicate the charging
status of the speaker; when fully charged, the LED indicator will
turn off.

Basic Operation

To turn on the speaker, press and hold the power button (1).

Bluetooth mode: When the speaker is turned on, it will be in
Bluetooth mode.

Micro SD mode: If a micro SD memory card is inserted into the
micro SD port (6), the speaker will start playing music
automatically.

Volume Adjustment

Short press the Volume – (3) or Volume + (5) to decrease or
increase the volume.

Using a Micro SD Card

Turn on the speaker.
Insert a micro SD card into the micro SD port (6).

The speaker will start playing music automatically.
Press and hold the Volume-/Previous track button (3) button to
skip to the previous track; press and hold the Volume +/Next track
button (5) to skip to the next track.

Press the button (4) to pause or resume the playback.

Bluetooth Operation – Pairing Devices

Place the speaker next to the Bluetooth device to be
paired.

Power on the speaker.
Follow the instructions of your device to search for the
speaker.

The speaker name is BTP-127 and will be displayed on your
Bluetooth device list, select it and enter the password 0000 if
required.
When paired successfully, you can stream music from your
Bluetooth device to the speaker.

FAQ

Q: How can I pair the Bluetooth speaker with my device?

A: Follow the steps provided in the Bluetooth Operation –
Pairing Devices section of the manual. Make sure to enter the
password 0000 if required.

Q: How do I know when the speaker is fully charged?

A: The LED indicator will turn off when the speaker is fully
charged.

Q: Can I use a micro SD card with this speaker?

A: Yes, you can insert a micro SD card into the micro SD port
(6) to play music directly from it.

“`

View Fullscreen

YW05 BLUETOOTH SPEAKER MANUAL

CONTROLS 1. Power on/off, press twice to change the LED light
2. LED indicator
3. Volume-/Previous track button 4. Play/Pause

5. Volume +/Next track button 6. Micro SD card input 7. Type-C charging port
CHARGING The speaker must be recharged when switched off. 1. Using the supplied USB cable, connect the Type-C end of the USB
cable to the Type-C port (7) of the speaker; connect the other end of the cable to the USB port of a PC or USB charger (5V, 1A, not included). 2. The LED indicator(2) will light up red to indicate the charging status of the speaker; when fully charged, the LED indicator will turn off.
BASIC OPERATION To turn on the speaker, press and hold the power button (1) . 1. Bluetooth mode. when the speaker turned on, it will be in bluetooth
mode. 2. Micro SD mode: If a micro SD memory card is inserted into the micro
SD port (6), the speaker will start playing music automatically.
VOLUME ADJUSTMENT Short press the Volume -(3) or Volume + (5) to decrease or increase the volume.
USING A MICRO SD CARD 1. Turn on the speaker. 2. Insert a micro SD card into the micro SD port (6) 3. The speaker will start playing music automatically. 4. Press and hold the Volume-/Previous track button (3) button to skip to
the previous track; press and hold the Volume +/Next track button (5) to skip to the next track. 5. Press the button (4) to pause or resume the playback.
Bluetooth OPERATION PAIRING DEVICES 1. Place the speaker next to the Bluetooth device to be paired.

2. Power on the speaker . 3. Follow the instructions of your device to search for the speaker. 4. The speaker name is “BTP-127” and will be displayed on your
Bluetooth device list, select it and enter the password “0000” if required. 5. When paired successfully, you can stream music from your Bluetooth device to the speaker.
Notes: The Bluetooth speaker only can connect to one Bluetooth device at a
time, and the connection cannot be interrupted during operation. When the Bluetooth pairing fails, turn off Bluetooth on your Bluetooth
device that you don’t want to connect, restart the Bluetooth speaker and search for the Bluetooth device to be connected again.
COMMANDS IN Bluetooth MODE 1. Press and hold the Volume-/Previous Track button (3) button to skip to
the previous track; press and hold the Volume +/Next track button (5) to skip to the next track. 2. Press the button (4) to pause or resume the playback.
TRUE WIRELESS STEREO Bluetooth CONNECTION (TWS FUNCTION FOR TWO SPEAKERS) 1. Power on two speakers and the default setting is the Bluetooth mode
(a sound is heard confirming the speaker is set into Bluetooth pairing mode); 2. Turn off the Bluetooth function on your phone or other Bluetooth device, press and hold the play/pause (4) button of either speaker (a sound is heard confirming the TWS function is activated), after a few seconds both Bluetooth speakers will give a voice prompt. Both speakers’ Bluetooth are connected; 3. Turn on your mobile phone’s Bluetooth, search for the “BTP-127”; 4. Find the name “BTP-127” and select it to connect; 5. Bluetooth speaker gives a voice prompt, then you can enjoy the music from two speakers; 6. Press and hold the play/pause(4) button again to quit the TWS function to hear music only from one speaker.

HANDS FREE FUNCTION

When incoming a call, press play/pause (4) button to answer the call, press again to hang up the call.

TECHNICAL FEATURES Rechargeable Battery: Output power: Charging: Bluetooth Frequency Range: Operating Frequency Range: Dimensions: Weight:

3.7V, 1000mAh 80W (8W RMS) 5V 1A 2402MHz~2480MHz 120Hz~18KHz 97(W)*75(D)*37(H) mm 240g

Documents / Resources

FTX YW05 Bluetooth Speaker [pdf] User Manual
FTXSP-8SBK, YW05 Bluetooth Speaker, YW05 Speaker, Bluetooth Speaker, YW05, Speaker

References

User Manual

FTX YW05 Bluetooth Speaker User Manual

YW05 Bluetooth Speaker

Specifications

Product Usage Instructions

Charging