JBL TUNE710BT Quick Start Guide

Your guide to getting started with your new headphones.

What's in the Box

Inside the box, you will find:

JBL TUNE710BT Headphones
USB-C Charging Cable
Detachable Audio Cable
Warranty Card
Safety Sheet
Quick Start Guide

Power On & Connect

To Power On: Press and hold the power button for 2 seconds.

To Enter Pairing Mode: Power off the headphones, then press and hold the power button for 5 seconds.

Connecting via Bluetooth:

On your device, go to Settings > Bluetooth.
Choose "JBL TUNE710BT" to connect.

Multi-Point Connection

Connect to two Bluetooth devices simultaneously. The headphones will automatically switch between devices.

Button Commands

Press x 1: Play/Pause music, Answer/End call.
Press x 2: Next track, Activate voice assistant (Siri/Bixby/Others).
Hold (2s): Power On/Off, Enter pairing mode.
Hold (5s): Enter pairing mode again.

Wired Listening Mode

Connect the included audio cable to the headphone jack for wired listening. This mode disables Bluetooth and active noise cancelling.

Charging

Connect the USB-C cable to charge the headphones. A full charge takes approximately 2 hours. A 5-minute charge provides up to 3 hours of playback.

Factory Reset

To reset the headphones to factory settings, press and hold the power button and the volume up button simultaneously for 5 seconds while the headphones are powered on and not connected to any device.

LED Behaviors

Solid Red: Low Battery
Pulsing Red: Charging
Solid Blue: Fully Charged
Pulsing Blue: Bluetooth Connecting
Solid Blue: Bluetooth Connected
Flashing Red & Blue: Bluetooth Not Connected
No Light: Power Off

Technical Specifications

Model	JBL TUNE710BT
Driver Size	40 mm / 1.6" Dynamic Driver
Power Supply	5V-1A
Weight	220 g / 0.485 lbs
Headset Battery Type	Polymer Li-ion battery (690 mAh / 3.7 V)
Charging Time	< 2 hrs from empty
Music Play Time with BT On	Up to 50 hrs
Frequency Response	20 Hz - 20 kHz
Impedance	32 ohm
Sensitivity (Passive Mode)	104 dB SPL @ 1 kHz
Sensitivity (Active Mode)	103 dB SPL @ 1 kHz
Maximum SPL	93 dB
Microphone Sensitivity	-40 dBV/Pa @ 1 kHz
Bluetooth Version	5.0
Bluetooth Profile Version	A2DP V1.3, AVRCP V1.6, HFP V1.7
Bluetooth Transmitter Frequency Range	2.4 GHz - 2.4835 GHz
Bluetooth Transmitter Power	< 10 dBm
Bluetooth Transmitter Modulation	GFSK, π/4 DQPSK, 8DPSK
Maximum Operation Temperature	45 °C

	JBL TUNE520BT Wireless On-Ear Headphones Quick Start Guide A comprehensive guide to setting up, connecting, and using the JBL TUNE520BT wireless on-ear headphones, including controls, app features, charging, and technical specifications.
	JBL JR460NC Wireless Noise Cancelling Headphones Quick Start Guide Get started with your JBL JR460NC wireless headphones. This guide covers setup, Bluetooth pairing, button controls, charging, factory reset, LED indicators, and technical specifications.
	JBL TUNE720BT Wireless Headphones Quick Start Guide A comprehensive guide to setting up and using your JBL TUNE720BT wireless over-ear headphones, including pairing, controls, app integration, charging, and technical specifications.
	JBL JR310BT Kids Wireless On-Ear Headphones Quick Start Guide A quick start guide for the JBL JR310BT Kids Wireless On-Ear Headphones, covering what's in the box, power on and connect, manual pairing, button commands, charging, LED behaviors, and technical specifications.
	JBL Tune 520BT Wireless Headphones Quick Start Guide Get started with your JBL Tune 520BT wireless headphones. Learn how to power on, connect via Bluetooth, use multi-point connection, control playback, charge the device, and access advanced features through the JBL Headphones app. Includes technical specifications and LED behavior.
	JBL Tune 125TWS Quick Start Guide Get started with your JBL Tune 125TWS true wireless earbuds. This guide covers setup, pairing, controls, charging, and technical specifications for optimal use.
	JBL Junior 320BT Quick Start Guide This guide provides essential information for setting up and using your JBL Junior 320BT wireless headphones, including unboxing, pairing, controls, app features, charging, and technical specifications.
	JBL TUNE600BTNC Wireless Noise Cancelling Headphones: Quick Start Guide Get started with your JBL TUNE600BTNC wireless on-ear headphones. This guide covers Bluetooth pairing, music and call controls, ANC activation, wired listening, LED status indicators, and technical specifications.