FORTIN 92561 EVO-ALL Universal All-In One Data Bypass and Interface Module
Product Information
- Product Name: Key Control THARNESS HARNAIS ENT
- Compatible Vehicles: Volkswagen Tiguan 2018
- Firmware Version: 61.[12]
Specifications
- Key Control Functions: Lock, Unlock, Arm, Disarm, Tachometer, Parking Lights, Trunk Open, Door Status, Trunk Status, Hood Status,n Hand-Brake Status, Foot-Brake Status
- Supports OEM Remote Monitoring
- Parts Required (Not Included): 1x Vehicle key, 1x 7.5 Amp. fuse, 4x Diodes, THARNESS THAR-VW6 or THARNESS THAR-VW2
INSTALLATION WITH KEY REQUIRED
ONLY COMPATIBLE WITH AUTOMATIC TRANSMISSION VEHICLES.
To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.
 |
Program bypass option: | UNIT OPTION | DESCRIPTION | |
| C1 | OEM Remote status (Lock/Unlock) monitoring | |||
| Program bypass option (If equiped with OEM alarm): | D2 | Unlock before / Lock after (Disarm OEM alarm) | ||
| IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN: | A11 |
OFF NON |
Hood trigger (Output Status). | |
| Contact de capot | ||||
| NOTES | |
1 KEY REQUIRED FOR THE INSTALLATION |
|
| The vehicle’s OEM remote will operate while the engine is running. | |
MANDATORY INSTALL
HOOD STATUS : THE HOOD PIN SWITCH MUST BE INSTALLED
IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.
PARTS REQUIRED
PARTS REQUIRED (NOT INCLUDED)
Notice: the installation of safety elements are mandatory.
The hood pin and the valet switch are essential security elements and must be installed.
STAND ALONE CONFIGURATION
REMOTE STARTER FUNCTIONNALITY
- All doors must be closed.
- Press the OEM remote’s Lock Unlock Lock buttons to remote-start (or remote-stop) the vehicle.
- The vehicle will START.
REMOTE STARTER DIAGNOSTICS
REMOTE STARTER WARNING CARD
CUT THIS WARNING CARD AND STICK IT ON A VISIBLE PLACE: or use the package RSPB, Sold separately.
WARNING
REMOTE STARTER
THE VEHICLE CAN BE STARTED BY EITHER: PRESSING THE LOCK BUTTON ON THE OEM REMOTE 3 TIMES CONSECUTIVELY OR BY A SMARTPHONE. TURN ON THE SAFETY SWITCH LOCATED UNDER THE DASHBOARD BEFORE WORKING ON THE VEHICLE.
Photo & Location
WIRE-TO-WIRE AUTOMATIC TRANSMISSION WIRING CONNECTION
THAR-VW6 – AUTOMATIC TRANSMISSION WIRING CONNECTION
THAR-VW2 – AUTOMATIC TRANSMISSION WIRING CONNECTION
PROGRAMMING PROCEDURE
REMOTE STARTER FUNCTIONALITY
- All doors must be closed.
- Remote start the vehicle.
- Unlock the doors with the remote-starter remote or the OEM remote.
- Press the brake pedal
- The vehicle can now be put in to gear and driven.
Notice: Updated Firmware and Installation Guides
Updated fi rmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest fi rmware and download the latest installation guide(s) prior to the installation of this product.
WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualified technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.
TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
FAQ
- How do I know if my vehicle is compatible with the Key Control THARNESS?
You can check the compatibility by verifying if your vehicle is a Volkswagen Tiguan 2018 model. - Is it necessary to install the hood pin switch?
Yes, it is mandatory to install the hood pin switch for proper functioning and security purposes. - Can I program the Key Control THARNESS without professional help?
We recommend having a qualified technician install and program the Key Control THARNESS to avoid any potential damage to your vehicle.
Documents / Resources
 |
FORTIN 92561 EVO-ALL Universal All-In One Data Bypass and Interface Module [pdf] User Guide 92561, THAR-VW6, THAR-VW2, 92561 EVO-ALL Universal All-In One Data Bypass and Interface Module, 92561 EVO-ALL, Universal All-In One Data Bypass and Interface Module, One Data Bypass and Interface Module, Interface Module, Module |