Interface Module Manuals & User Guides

SHINHWA SYSTEM SHAL-1000 Access Link Control Unit or System Interface Module Installation Guide

September 8, 2026

INSTALLATION GUIDE ACCESS LINK SHAL-1000 Installation Guide Product Cable Connection PC Connection Checklist After Connecting ACCESS LINK to a PC, Verify the Following in [Control Panel]-[Device Manager] Verify that Realtek USB FE Family Controller appears under Network Adapters. Verify that…

Brand: SHINHWA SYSTEM

ASSA ABLOY ADA1028W2 Wireless Interface Module User Manual

August 22, 2026

ASSA ABLOY ADA1028W2 Wireless Interface Module CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this device. To obtain the latest manual and template revisions or to view installation…

Brand: ASSA ABLOY

i safe MOBILE IS-IM1A.1 Interface Module Instruction Manual

July 28, 2026

i safe MOBILE IS-IM1A.1 Interface Module PROTECT YOUR LIFE AND READ THE OPERATING MANUAL This Operating Manual is part of the device IS-IM1A.1. This Operating Manual provides important information for safe use of the device. Before using the device, read…

Brand: i safe MOBILE

SOLITY MT-200C Thread Interface Module User Manual

July 14, 2026

SOLITY MT-200C Thread Interface Module Features Solity's MT-200C is an interface board/accessory product that uses Wireless Thread communication. MT-200C is designed to easily implement IoT in an attachable manner on basic door locks. Items Features   Core MCU Cortex-M33, 78MHz…

Brand: SOLITY

tecnint PM-R125 Rfid Lf Interface Module User Manual

April 28, 2026

tecnint PM-R125 Rfid Lf Interface Module Specifications Electrical characteristics  Model PM-R125-TTL PM-R125-232 Power supply 5VDC ± 0.25V Power consumption < 1W RF frequency LF RFID BAND 125kHz ± 2kHz Antenna External, inductive Antenna connection Molex 51191-0300 Data port Serial, TTL…

Brand: tecnint

Honeywell EIM4010 Equipment Interface Module Installation Guide

April 27, 2026

Honeywell EIM4010 Equipment Interface Module Overview The Honeywell EIM4010 Equipment Interface Module is used to connect HVAC equipment with compatible control systems. It acts as a communication bridge between thermostats and heating/cooling equipment, enabling better system control and monitoring. Specifications…

Brand: Honeywell

Honeywell NION-232B Network Input Output Node interface module Installation Guide

April 14, 2026

NION-232-U400 Product Installation Document This document covers the procedures and specifications for installing the above listed unit and when appropriate, information regarding configuration on the monitored device. For more detailed configuration and operation information, refer to Network Installation Manual, Echelon…

Brand: Honeywell

xtralis LT-SEN-IM Li-ION Tamer off Gas Sensor and Interface Module User Manual

March 28, 2026

xtralis LT-SEN-IM Li-ION Tamer off Gas Sensor and Interface Module General Scope This document provides specification details on the Li-ion Tamer Sensor MOS designed to assist users in the installation, operation, and maintenance of the system. Important Notes!  This Li-ion…

Brand: xtralis

Honeywell Home EIM4010 Equipment Interface Module Installation Guide

March 27, 2026

EIM4010 Equipment Interface Module Installer Guide Compatibility EIM4010 Equipment Interface Module is compatible with Elite PRO Red link 3.0 thermostats and T10+ thermostats. Follow the thermostat installation instructions to wire to 24 VAC power and start setup. Mounting EIM4010 Use…

Brand: Honeywell Home

FORTIN EVO-ALL 82101 Universal All in One Data Bypass and Interface Module Instruction Manual

March 15, 2026

FORTIN EVO-ALL 82101 Universal All-in-One Data Bypass and Interface Module Product Specifications Compatible with Mitsubishi RVR Outlander Sport USA vehicles from 2011-2026 Firmware Version: 86.[16] Program bypass option available Features: Immobilizer bypass, Lock, Unlock, Arm, Disarm, Trunk (open), Tachometer, Door…

Brand: FORTIN