FormD T1 Vertical Stand
Product Information
Specifications:
- Product Name: Vertical Stand
- Manufacturer: FormDT1.com
- Components: Thumbscrew, SMA Extension Cable, 45mm Long Screws,Vertical Stand Feet, SMA Extension Hex Nut
- External Antenna: Not included
Product Usage Instructions
Unfasten M3 Thumbscrew:
Begin the assembly process by unfastening the M3 Thumbscrew provided in the package.
Fasten SMA Extension Cable:
Secure the SMA Extension Cable to the appropriate port on the Vertical Stand. Make sure it is tightly fastened for stability.
Fasten 45mm Long Screws:
Use the 45mm Long Screws to attach specific components of the stand together. Follow the assembly manual for guidance.
Fasten Vertical Stand Feet:
Attach the Vertical Stand Feet securely to the base of the stand to ensure proper balance and support.
Fasten SMA Extension Hex Nut:
Secure the SMA Extension Hex Nut in place as indicated in the assembly manual to complete the setup.
Frequently Asked Questions
Q: Is an external antenna included with the Vertical Stand?
A: No, the external antenna is not included with the Vertical Stand.
Q: Who is the manufacturer of the Vertical Stand?
A: The Vertical Stand is manufactured by FormDT1.com.
Q: What is the purpose of the M3 Thumbscrew?
A: The M3 Thumbscrew is used as part of the assembly process to secure components together.
INSTALLATION INSTRUCTION
Unfasten:
M3 Thumbscrew
Fasten:
SMA Extension
Cable
45mm Long
Screws
Vertical Stand
Feet
SMA extension
Hex nut
External Antenna not included
Documents / Resources
 |
FormD T1 Vertical Stand [pdf] Instruction Manual T1, T1 Vertical Stand, Vertical Stand, Stand |
