Field Controls is a premier manufacturer of air movement, air control, and indoor air quality solutions, delivering products for ventilation, combustion, and air purification.
Field Controls is a recognized leader in the design and manufacture of air movement, air control, and indoor air quality products. For over 90 years, the company has provided innovative solutions for residential and commercial HVAC applications, focusing on improving safety, efficiency, and comfort. Their comprehensive product line includes combustion control devices such as draft regulators and power venters, as well as advanced air treatment systems like the UV-Aire purifiers, fresh air ventilation systems, and whole-house dehumidifiers.
Committed to addressing indoor air pollution, Field Controls offers technologies that target particulates, biological contaminants, and volatile organic compounds (VOCs). Their Healthy Home System™ integrates filtration, purification, and ventilation to ensure cleaner, healthier air. All Field Controls products are engineered to meet rigorous industry standards and are typically installed by qualified HVAC professionals to ensure optimal performance and compliance with safety codes.
Uusimmat käyttöohjeet manuals+ tälle tuotemerkille kuratoitu.
Katso tämän merkin asennus-, määritys- ja vianmääritysvideoita.
Yleisiä kysymyksiä tämän tuotemerkin käyttöoppaista, rekisteröinnistä ja tuesta.
For most UV-Aire and Cube systems, it is recommended to replace the UVC germicidal lamps every 12 to 24 months, or when the service indicator light turns red, to ensure effective air disinfection.
No. Field Controls mandates that their devices be installed by a qualified agency or licensed installer. Improper installation can result in safety hazards, code violations, and voiding of the warranty.
Sizing depends on the BTU/hr input and the equivalent length of the vent pipe. Refer to the sizing charts provided in the specific product installation manual or consult a qualified HVAC professional.
It is generally recommended to inspect and clean coils every 3 to 6 months. However, self-cleaning PRO-Cell™ catalyst grids should not be cleaned with liquid solutions; they clean themselves via UVC exposure during airflow.