Instruction Manual
5.0” PCAP Touch Screen LCD GUI Development Kit
Congratulations on the purchase of your μEZ® GUI development kit! Our goal is to ensure you have a pleasant experience familiarizing yourself with the functions and capabilities of our products.
To Begin Development with your μEZ GUI:
- Power on the device by connecting the 5V power adapter tone end of the USB cable and the other end to the μEZ GUI P2.
Note: Do not connect the μEZ GUI to a computer USB port. Standard USB 2.0/3.0 ports will not provide sufficient power to the device. - Visit TeamFDI.com/StartHere to download the UEZGUI-4357-50WVN Start Here Guide. This guide will provide step-by-step instructions and supporting files for designing your first graphical user interface.
UEZGUI-4357-50WVN Kit Contents
- 5.0”PCAP Touch Screen LCD GUI Production Module (Part number: UEZGUI-4357-50WVN-BA)
- SEGGER J-LinkTM
- 9 Pin Samtec Cable Lite Cortex-M JTAG Debugger
- (2) USB Type A to USB Type Mini-B USB Cables
- Universal A/C to 5V USB Power Supply
Also Included:
- Industrial microSDHC card
- Expansion board for μEZ GUI with 70-pin breakout and optional RS232.
Note: The 4-bit microSD card slot is not designed for this μEZ GUI. (Part Number: UEZGUI-EXP-BRKOUT) - 20 Pin Flex Cable
- 50 Pin Flex Cable
Future Designs, Inc.
Rev. 1.3 10/17/2023|
MA00078
Documents / Resources
 |
FDI UEZGUI-4357-50WVN-BA 5.0 Pcap Touch Screen LCD GUI Development Kit [pdf] Instruction Manual UEZGUI-4357-50WVN-BA 5.0 Pcap Touch Screen LCD GUI Development Kit, UEZGUI-4357-50WVN-BA, 5.0 Pcap Touch Screen LCD GUI Development Kit, Screen LCD GUI Development Kit, GUI Development Kit, Development Kit |
