Instruction Manual for FDI models including: UEZGUI-4357-50WVN-BA 5.0 Pcap Touch Screen LCD GUI Development Kit, UEZGUI-4357-50WVN-BA, 5.0 Pcap Touch Screen LCD GUI Development Kit, Screen LCD GUI Development Kit, GUI Development Kit, Development Kit
5.0″ PCAP Touch Screen LCD GUI (Production Module) – UEZGUI-4357-50WVN-BA – FDI – Future Designs Inc.
5.0" PCAP Touch Screen LCD GUI Development Kit Congratulations on the purchase of your EZ® GUI development kit! Our goal is to ensure you have a pleasant experience familiarizing yourself with the functions and capabilities of our products. To Begin Development with your EZ GUI: 1. Power on the device by connecting the 5V power adapter to one end of the USB cable and the other end to the EZ GUI P2. Note: Do not connect the EZ GUI to a computer USB port. Standard USB 2.0/3.0 ports will not provide sufficient power to the device. 2.Visit TeamFDI.com/StartHere to download the UEZGUI-4357-50WVN Start Here Guide. This guide will provide step-by-step instructions and supporting files for designing your first graphical user interface. FDI Future Designs, Inc. UEZGUI-4357-50WVN Kit Contents · 5.0" PCAP Touch Screen LCD GUI Production Module (Part number: UEZGUI-4357-50WVN-BA) · SEGGER J-LinkTM Lite Cortex-M JTAG Debugger · 9 Pin Samtec Cable · (2) USB Type A to USB Type Mini-B USB Cables · Universal A/C to 5V USB Power Supply Also Included: · Industrial microSDHC card · Expansion board for EZ GUI with 70-pin breakout and optional RS232. Note: The 4-bit microSD card slot is not designed for this EZ GUI. (Part Number: UEZGUI-EXP-BRKOUT) · 20 Pin Flex Cable · 50 Pin Flex Cable Rev. 1.3 10/17/2023 MA00078Adobe PDF Library 17.0 Adobe InDesign 19.0 (Windows)