Instructions
MODE button
Replacing the battery
Favorite settings
Activation Favorite settings
Deactivation Favorite settings
Bluetooth® configuration
Technical data
- Radio frequency
- 2,4 Ghz
- Robustness
- FHSS
- Latency
- <6ms
- Range
- Open space/Espace Ouvert/Im Freien/Spazio aperto/Espacio abierto : <15 m
- Autonomy
- Continuous: up to 2 months (Always connected with 4 values /s.)
- Saver: up to 5 months (The instrument sends value only when the position has changed)
- Blind/Push: up to 7 months (Value is sent from the instrument (button) or requested from the computer)
Specifications
For advanced functions and additional information: refer to the website www.sylvac.ch
Certifications
CERTIFICATE OF CONFORMITY
We certify that this instrument has been manufactured in accordance with our Quality Standards and tested with reference to masters of certified traceability by the National Office of Metrology.
Bluetooth® Certification
DESCRIPTION OF BLUETOOTH® MODULE:
This module is based on Nordic Semiconductor nRF8001 μBlue Bluetooth Low Energy Platform. The nRF8001 is a single-chip transceiver with an embedded baseband protocol engine, suitable for ultra-low power wireless applications conforming to the Bluetooth Low Energy Specification contained within v4.0 of the overall Bluetooth specification. The nRF8001, used in the current revision of ISP091201, is a production product using a RoM for the baseband protocol engine.
US/CANADA CERTIFICATION
This device contains
- FCC ID: 2AAQS-ISP091201
- IC: 11306A-ISP091201
JAPAN CERTIFICATION
Maintenance
- Dry carefully all metallic parts of the instrument after water jets or moisture effects to guarantee good mechanical working and to avoid rost.
- Don’t use aggressive products (alcohol, trichloromethyl, or others) to clean plastic parts.
- Don’t keep the instrument in the sun, heat, or humidity.
BRAZIL CERTIFICATION
SOUTH KOREA CERTIFICATION
- MSIP-CRM-iNs-ISP091201
FCC STATEMENT
NOTICE :
Changes or modifications made to this equipment not expressly approved by Sylvac may void the FCC authorization to operate this equipment.
NOTICE
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions.
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
NOTE
This equipment has been tested and found to comply with the limits for a Class A digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
RADI OF FREQUENCY RADIATION EXPOSURE INFORMATION:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
- Changes without prior notice
- Edition: 2016.04 / 681.295.01-100 www.sylvac.ch
FAQ
Q: How do I reset the device?
A: To reset the device, hold the RESET button for more than 5 seconds.
Q: How do I pair Bluetooth devices?
A: To pair Bluetooth devices, ensure Bluetooth is on and wait for the device to be discoverable within 120 seconds. If not connected, clear pairing information and try again.
Documents / Resources
 |
EVO Bluetooth 10.00 Data Favorite Button [pdf] Instructions 10.00, MM, 10.00 Data Favorite Button, 10.00, Data Favorite Button, Favorite Button, Button |
