Sylvac EVO Bluetooth® Digital Measuring Instrument
User Manual and Technical Specifications
Introduction
This document provides comprehensive instructions and technical specifications for the Sylvac EVO Bluetooth® digital measuring instrument. It covers device operation, settings, Bluetooth connectivity, maintenance, and compliance information.
Product Name: EVO Bluetooth®
Model Number: ISP091201
Brand: Sylvac
Key Features: Digital measurement, Bluetooth® 4.0 connectivity, IP67 ? rating.
Device Overview
The EVO Bluetooth® instrument features a digital display and three main control buttons:
- MODE Button: Used to cycle through different measurement modes and settings.
- SET Button: Confirms selections, activates functions, and is used for setting adjustments.
- DATA/Favorite Button: Records measurement data, activates preset values, and manages favorite settings.
The device is powered by a CR2032 battery.
Operating Modes and Functions
The instrument offers various modes and functions accessible via the buttons:
Basic Operations:
- Replacing the Battery: The manual visually guides users through replacing the CR2032 battery.
- Mode Selection: Press the MODE button to navigate modes. Press and hold the SET button for over 1 second to confirm a selected mode.
- Power Off: The device can be powered off using a dedicated OFF function.
Measurement Modes:
- Unit: Allows selection of measurement units, such as millimeters (mm) and inches (Inch).
- PrE (Preset): Enables setting a specific reference value for comparative measurements.
- Hold: Freezes the current measurement displayed on the screen.
- Lock: Secures current settings or measurement values to prevent accidental changes.
Favorite Settings Management:
- Activation: Press and hold the SET button for over 3 seconds to activate saved favorite settings.
- Deactivation: Press and hold the DATA button for over 3 seconds to deactivate favorite settings.
Bluetooth® Connectivity
The EVO Bluetooth® is equipped with Bluetooth® SMART technology (version 4.0) for wireless data transmission.
Bluetooth Status Indicators:
- Off / Disconnected (bt OFF): Indicates the Bluetooth function is inactive or the device is not connected to a receiver.
- Advertising (max 120s.): The device is discoverable for pairing for a maximum of 120 seconds.
- Connected (bt On): The device is successfully paired and connected to a receiver.
- Clear Pairing Information: This function erases previously stored pairing data, allowing for new connections.
- Display MAC Address: Shows the unique Media Access Control (MAC) address of the device's Bluetooth interface.
Bluetooth Configuration: Specific Bluetooth settings and pairing procedures can be managed through the device's interface or connected software.
Technical Specifications
| Parameter | Specification |
|---|---|
| Resolution | 0.01 / .0005" or 0.001 / .00005" |
| Max slider speed | Max 2.5 m/s - 100"/s |
| Display refresh rate | > 10 measurements per second |
| Data output technology | Bluetooth® 4.0, 2.4GHz |
| Mean power consumption | 45 µA |
| Battery life (Bluetooth OFF) | 8000 hours |
| Battery life (Bluetooth ON) | Refer to specific Bluetooth® technical data |
| Operating temperature | +5°C to +40°C |
| Storage temperature | -10°C to +60°C |
| Measuring system | Sylvac system patented |
| Ingress Protection (IP) rating | IP 67 ? (IEC60529) |
| Parameter | Specification |
|---|---|
| Radio frequency | 2.4 GHz |
| Bluetooth Protocol | FHSS (Frequency-Hopping Spread Spectrum) |
| Latency | <6ms |
| Range (Open space) | <15 meters |
| Range (Industrial environment) | 1-5 meters |
| Mode | Estimated Duration | Conditions |
|---|---|---|
| Continuous | Up to 2 months | Device is always connected and transmitting 4 values per second. |
| Saver | Up to 5 months | Values are sent only when the measured position changes. |
| Blind/Push | Up to 7 months | Values are sent from the instrument's button or requested by a connected computer. |
Maintenance and Care Instructions
Proper maintenance ensures the instrument's accuracy and longevity:
- Post-Exposure Cleaning: After contact with water or moisture, thoroughly dry all metallic parts of the instrument. This guarantees correct mechanical operation and prevents rust.
- Cleaning Agents: Do not use aggressive cleaning products, such as alcohol or trichlorethylene, on the plastic parts of the device.
- Storage Conditions: Avoid storing the instrument in environments exposed to direct sunlight, excessive heat, or high humidity.
Bluetooth® Module Details
The integrated Bluetooth® module is based on the Nordic Semiconductor nRF8001 µBlue Bluetooth Low Energy Platform. This component is a single-chip transceiver featuring an embedded baseband protocol engine, designed for ultra-low power wireless applications compliant with the Bluetooth Low Energy Specification v4.0.
Certifications and Compliance Statements
The Sylvac EVO Bluetooth® instrument has been manufactured and tested in accordance with established quality standards and metrology traceability.
- US/Canada (FCC/IC): This device complies with Part 15 of the FCC Rules and RSS-210 of Industry Canada. Operation is subject to two conditions: it must not cause harmful interference, and it must accept any interference received. FCC ID: 2AAQS-ISP091201, IC: 11306A-ISP091201.
- Mexico (IFT): This equipment is subject to specific operating conditions. IFT: RCPSYIS14-0655.
- Brazil (ANATEL): This equipment operates on a secondary basis and is not entitled to protection against harmful interference, nor can it cause interference to primary systems.
- South Korea (MSIP): Classified as Class A equipment for industrial use. Users should be aware of its operational environment.
- Japan: Certified under registration number R 001-A06167.
- CE Marking: Indicates compliance with European Union directives. ✅
Radiofrequency Radiation Exposure Information: This equipment complies with FCC radiation exposure limits set for an uncontrolled environment. It should be installed and operated with a minimum distance of 20 cm between the radiator and the user's body. The transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
