About Your Ultenic U10 PRO Stick Vacuum
Congratulations on your purchase of the Ultenic U10 PRO stick vacuum. This manual provides detailed instructions to help you get the most out of your new cleaner's features. Please read through this guide carefully for optimal performance and safe operation.
Key Features & Specifications
- Model: U10 PRO
- Voltage: 25.9VDC
- Power: 400W with powerhead
- Dust Capacity: 0.6 L
- Battery Type: 2200 mAh Li-Ion
- Runtime: Up to 35 minutes
- Charge Time: 4-5 hours
- Net Weight: 2.34 Kg
Important Safety Precautions
Always prioritize safety when using your Ultenic U10 PRO. Ensure the appliance is switched off before cleaning or maintenance. Never immerse the unit, battery, or plug in water. Avoid using outdoors or on wet surfaces. Always check the power cord for damage. This appliance is designed for domestic indoor use only.
For detailed safety guidelines, including precautions for use on stairs, handling with wet hands, and avoiding flammable or toxic materials, please refer to the full safety section of this manual.
Getting Started: Assembly & First Use
Before assembling or using your vacuum, ensure the battery is removed. Follow the step-by-step instructions for attaching the powerhead to the rod, inserting the main unit into the rod, and installing the battery. Accessories can be connected by inserting them into the air inlet until a click is heard.
Charging: For the first three uses, charge the vacuum for 12 hours. Subsequent charges typically take 4-5 hours. The charging indicator light will flash red when charging and turn solid blue when fully charged. Note: The vacuum cannot be switched on while charging.
Product Usage & Maintenance
Operate the vacuum by pressing the on/off button. Use the boost button to switch between low and high power modes. Regular maintenance ensures optimal performance. It is recommended to empty the dust bin after each use or when it reaches the maximum fill line.
Maintenance: Clean the dust bin and filters regularly. The HEPA filter and cyclone filter can be removed for cleaning. The roller brush can also be removed for cleaning. Refer to the manual for detailed instructions on filter and roller brush maintenance.
Storage: The included wall storage bracket can be used for convenient storage. Remove the battery if the vacuum will be stored for an extended period.
Troubleshooting
If you encounter issues such as the cleaner not starting, reduced suction, or charging problems, consult the troubleshooting table in the manual. Common solutions include charging the battery, emptying the dust bin, cleaning or replacing filters, and clearing blockages.
Customer Support
For further assistance, Ultenic provides customer service via email for various regions, including the United States, Germany, France, Spain, Canada, the United Kingdom, Italy, and Japan. You can also find support through their general email and website.
- Website: www.ultenic.com
- Email (General): support@ultenic.com
