JVC SP-SX2BT Portable Bluetooth Speaker
User Manual
Getting Started
This section guides you through powering on and pairing your JVC SP-SX2BT speaker.
Powering On
Long press the power button for 3 seconds. The speaker will enter Bluetooth pairing mode, indicated by a blinking blue indicator light.
Bluetooth Pairing
To pair your device:
- On your phone or device, open Bluetooth settings.
- Find "JVC SP-SX2BT" in the list of available devices and select it.
- Upon successful connection, the unit will emit a "Dong-Dong" sound, and the indicator light will remain solid blue. You can now play music.
Diagram Description: Visuals show a speaker unit, a phone with Bluetooth settings open displaying "JVC SP-SX2BT", and an indicator light status.
AUX IN Connection
The speaker features a 3.5mm AUX audio input port for wired connections.
Connect the speaker to your mobile phone, MP3 player, PC, or laptop using a 3.5mm audio cable. The green indicator light will turn on, signifying that you can play music via wired connection. Note: Stereo sound is not supported in AUX mode.
Diagram Description: Visuals show a speaker unit and a device connected via a 3.5mm audio cable to the AUX IN port.
Basic Operation
Control your speaker using the buttons and modes.
Bluetooth Mode
- Play/Pause: Short press the button.
- Answering Calls: When a call is incoming, short press the button to answer.
- Refusing Calls: When a call is incoming, double press the button to refuse.
- Ending Calls: During a call, short press the button to hang up.
- Volume Up: Short press for volume up.
- Next Track: Long press for the next track.
- Volume Down: Short press for volume down.
- Previous Track: Long press for the previous track.
AUX IN Mode
- Volume Up: Short press for volume up.
- Volume Down: Short press for volume down.
LED Operation
Understand the status of your speaker through its LED indicator.
| Status Description | LED Definition |
|---|---|
| Power On | The default mode is Bluetooth pairing mode, with blue light flashing. If a 3.5mm AUX IN cable is plugged in, it will enter AUX IN mode, and the green light will be on. |
| Bluetooth Mode (Play/Pause) | Blue light is normally on. |
| Wait for Pairing | Blue light flashes. When the speaker is out of the Bluetooth connection range, the blue light flashes (returning to pairing status). If the speaker is in pairing mode for over 10 minutes without connection, it will power off automatically. |
| Bluetooth Connected | Blue light is normally on. |
| Charging Status | Red light is on when charging; the red light turns off once fully charged. |
| AUX IN Mode | Green light is normally on. |
Product Specifications
| Product Name | SP-SX2BT |
|---|---|
| Bluetooth Version | 5.0 |
| Bluetooth range | 10m |
| Driver Unit | 4Ω 12W = 6W x 2 |
| Battery Capacity | 2200mAh |
| Audio Input | Bluetooth / 3.5mm AUX IN |
| Working time | 7~8Hrs (70% volume) |
| Charging time | 4~4.5Hrs (Input: 5V=1A) |
| S/N | ≥75dB |
| NFC | Support |
| Handsfree function | Support |
| Dimension | 71 x 73.6 x 169.6mm |
Frequently Asked Questions
- Q: What kind of charger should we use for the speaker?
- A: All common USB chargers can be used, while we suggest the ones above 5V/1A.
- Q: What if there is noise or discontinuous sound when playing?
- A: The speaker can be normally used within 10m under no obstruction environment. If it is over 10m or with obstruction, there might be noise or discontinuous sound.
- Q: Why will the speaker shut down automatically when it is working?
- A: When there is no Bluetooth pairing or AUX IN connection within 10 minutes, the speaker will shut down automatically to reduce power consumption.
- Q: The speaker cannot connect to the once-paired cellphone.
- A: First, remove the speaker's pairing name from the cellphone's Bluetooth list and then short press the Bluetooth Disconnection Button to restart pairing mode.
- Q: What is the working sequence of the speaker?
- A: The priority is AUX IN input, phone call in Bluetooth mode, and then playing music in Bluetooth mode.
- Q: The speaker cannot be started up in a normal situation.
- A: Please plug in the charger and try again in a few minutes.
*This speaker supports mobile phones and tablet PCs etc. The illustrations in this User Manual are based on mobile phones.
Compliance Information
FCC Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
FCC Radiation Exposure Statement:
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
For Customer Use:
Enter the Model No. and Serial No. (on the rating label of unit) below. Retain this information for future reference.
Model No.: [User to fill in]
Serial No.: [User to fill in]
Supplier's Declaration of Conformity:
Model Number: SP-SX2BT
Trade Name: JVC
Responsible party: JVCKENWOOD USA Corporation
Address: 1440 Corporate Drive Irving, TX 75038
Telephone: (678)449-8879
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
[Country of Origin: MADE IN CHINA]
