UGREEN HiTune T6 Hybrid Active Noise-Cancelling Earbuds

Model: WS200

Specifications

Product NameUGREEN HiTune T6 Hybrid Active Noise-Cancelling Earbuds
ModelWS200
Bluetooth VersionBluetooth 5.3
Bluetooth ProfilesHFP, AVRCP, A2DP, BLE, SPP
Bluetooth Frequency2400MHz-2483.5MHz
Bluetooth Range10 m/32.8 ft
CodecsAAC, SBC, LDAC
Frequency Response20 Hz-40 kHz
Max. RF Output Power4dBm
Charging Case BatteryPolymer Lithium-Ion Battery
Charging Case Input5V 500mA
Charging Case Output5V 200mA
Charging PortUSB-C
Charge Earbuds1.5 hours
Charge Charging Case2 hours
Operating Time7 hours of music playback with single charging
30 hours of music playback with charging case

*Statistics pertaining to battery life taken from UGREEN Labs, and were tested using the AAC codec at 60% volume in normal mode.

Charging

Charging Time: Earbuds: 1.5 hours, Charging Case: 2 hours

LED Indicators:

  • Charging: Blinking White
  • Fully Charged: LED Off
  • Battery < 30%: Red Indicator Blinks for 3s

Note: Please use a 5V/1A power adapter at least for charging.

Earbud Wear & Adjustment

The UGREEN HiTune T6 includes 4 ear tips (XS, S, M, L) with the small tips pre-installed. Choose the size that best fits your ear for optimal comfort, sound quality, and noise cancellation.

  1. Flip the ear tips up.
  2. Align the size characters with the tuning hole and insert them into the earbuds.
  3. Flip the ear tips down to complete the installation.

Powering On/Off

  • To Power On: Open the charging case lid.
  • To Power Off: Place earbuds in the case and close the lid.

Pairing

Open the charging case lid to allow earbuds to enter pairing mode. Then, connect to "UGREEN HiTune T6" from your device's Bluetooth list.

Force Pairing

If you cannot find "UGREEN HiTune T6" in your Bluetooth list: Open the charging case lid (with earbuds inside), then press and hold the reset button for 3 seconds until the white indicator of the right earbud blinks.

Factory Reset

Open the charging case (with earbuds inside), then press and hold the reset button for 10 seconds. Successful resets are indicated when the LED indicator blinks 3 times, signifying that all paired information has been removed.

Controls

Next Track: [double-tap] on [right-earbud]

Previous Track: [double-tap] on [left-earbud]

Play/Pause: [single-tap] on [left-earbud] or [right-earbud]

Answer/End Call: [single-tap] on [left-earbud] or [right-earbud]

Decline Call: [press-hold-1s] on [left-earbud] or [right-earbud]

Cycle ANC Modes (ANC on/Awareness/ANC off): [press-hold-1s] on [left-earbud] or [right-earbud]

Activate Voice Assistant: [triple-tap] on [left-earbud]

Multi-device Pairing

  1. Complete pairing with the first device.
  2. Place the earbuds in the case, then press and hold the reset button for 3 seconds until the white indicator of the right earbud blinks.
  3. Search and connect to "UGREEN HiTune T6" from your second device's Bluetooth list.

Note: The HiTune T6 earbuds can only play music from one device at a time. There might be a momentary delay when switching devices due to differences in brands/versions and their compatibility.

Regulatory Information

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna; Increase the separation between the equipment and receiver; Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; Consult the dealer or an experienced radio/TV technician for help. The device can be used in portable exposure condition without restriction.

EU Declaration of Conformity

Ugreen Group Limited declares that the product is in compliance with Directive 2014/53/EU & 2011/65/EU. More information is available at: https://www.ugreen.com/download/

Ugreen Group Limited
Add: Ugreen Building, Longcheng Industrial Park, Longguanxi Road, Longhua, Shenzhen, China

EU REP: Ugreen Group GmbH
Add: Mannheimer Str. 13, 30880 Laatzen, Germany

GB Declaration of Conformity

Ugreen Group Limited declares that the product is in compliance with UK Radio Equipment Regulations (SI 2017 No.1206) & The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 (SI 2012 No.3032). More information is available at: https://www.ugreen.com/download/

Ugreen Group Limited
Add: Ugreen Building, Longcheng Industrial Park, Longguanxi Road, Longhua, Shenzhen, China

UK REP: Acumen International Business Consultancy Limited
Add: 94 Ock Street, Abingdon, OX14 5DH, UK

Important WEEE Information

This symbol on the product(s) indicates that WEEE should not be mixed with general household waste. For proper treatment, recovery, and recycling, please take this product(s) to designated collection points. Disposing of this product correctly helps save valuable resources and prevent negative effects on human health and the environment. Contact your local authority for details of your nearest designated collection point.

IC Statement

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference; (2) this device must accept any interference, including interference that may cause undesired operation of the device. The device has been evaluated to meet general RF exposure requirement and can be used in portable exposure condition without restriction.

Warranty Information

A limited 2-year warranty applies to all UGREEN products purchased from UGREEN official store or authorized sellers. Please feel free to contact customer support if you encounter any problems.

Models: WS200 HiTune T6 Hybrid Active Noise Cancelling Earbuds, WS200, HiTune T6 Hybrid Active Noise Cancelling Earbuds, Hybrid Active Noise Cancelling Earbuds, Active Noise Cancelling Earbuds, Noise Cancelling Earbuds, Cancelling Earbuds, Earbuds

File Info : application/pdf, 1 Pages, 2.03MB

PDF preview unavailable. Download the PDF instead.

GetApplicationAttachment.html?id=6653852

References

Adobe PDF library 15.00 Adobe Illustrator(R) 24.0

Related Documents

Preview UGREEN HiTune T3 Wireless Earbuds User Manual
Comprehensive user manual for UGREEN HiTune T3 Active Noise-Cancelling Wireless Earbuds (Model WS106), covering setup, operation, controls, specifications, and compliance information.
Preview UGREEN HiTune T6 WS200 Wireless ANC Earbuds
Experience superior audio with UGREEN HiTune T6 ANC TWS Wireless Earbuds. Featuring Active Noise Cancellation (up to 95% engine noise reduction), Hi-Res LDAC technology, and Bluetooth 5.3 for low-latency, these earbuds offer crystal-clear calls with 6 microphones and up to 30 hours of playtime. Includes Transparency Mode and comfortable earcaps.
Preview UGREEN HiTune T3 ANC Wireless Earbuds User Manual & Specifications
Official user manual and specifications for UGREEN HiTune T3 Active Noise-Cancelling Wireless Earbuds (Model WS106). Learn about charging, pairing, music controls, and important regulatory information.
Preview UGREEN HiTune T3 ANC Wireless Earbuds User Manual | WS106
Comprehensive user manual for the UGREEN HiTune T3 Active Noise-Cancelling Wireless Earbuds (Model WS106). Find setup instructions, control guide, specifications, troubleshooting, and compliance information.
Preview UGREEN HiTune X6 Wireless Earbuds Troubleshooting Guide
A comprehensive troubleshooting guide for UGREEN HiTune X6 wireless earbuds, covering common issues like power, pairing, sound quality, and ANC functionality.
Preview UGREEN HiTune H6 Pro Wireless Earbuds User Manual
Comprehensive user manual for UGREEN HiTune H6 Pro Active Noise-Cancelling Wireless Earbuds (Model: WS203), covering setup, controls, features, and safety information.
Preview UGREEN HiTune T3 Active Noise-Cancelling Wireless Earbuds User Manual
This manual provides instructions for the UGREEN HiTune T3 Active Noise-Cancelling Wireless Earbuds, including setup, charging, pairing, music control, and specifications.
Preview UGREEN HiTune X6 User Manual: Setup, Features, and Troubleshooting
A comprehensive guide for UGREEN HiTune X6 wireless earbuds, detailing setup, Bluetooth pairing, controls, technical specifications, maintenance, and common troubleshooting steps.