Technical Specifications

• Power supply: 5V DC USB Type C
• Communication: Wi-Fi 2.4GHz
• Resolution: 4Mpx 2560*1440P
• Storage: TF (micro SD) card not included (Max to 256GB)
• Dimensions: 72 x 108 mm
• Product Compliance: EU Directives: 2014/53/EU, 2011/65/EU

Introduction

The smart camera is a component of the ENGO Smart system. It is used for visual monitoring of the premises. It provides convenient control of high-quality images: panorama, different viewing angles (camera tilt degrees), zoom, and horizontal and vertical rotation. It is programmed and operated in the ENGO Smart mobile app. It enhances the security of the supervised premises.

Product Features

Safety information
Use by national and EU regulations. Use the device only as intended, keeping it in a dry condition. The product is for indoor use only. Please read the entire manual, before installation or use.

Camera description

1. Microphone
2. Camera lens
3. LED diode
4. IR illumination
5. Micro SD slot
6. Loudspeaker
7. USB type C power socket
8. Reset button

Inserting a memory card
Slide the black part of the camera in the direction indicated by the arrow. Slide the card into the micro SD card slot until you hear a click.

Installation of the camera in the app
Make sure your router is within range of your smartphone. Make sure you are connected to the Internet. This will reduce the pairing time of the device.

STEP1 – DOWNLAD ENGO SMART APP
Download the ENGO Smart app from Google Play or Apple App Store and install it on your smartphone.

STEP 2 – REGISTER THE NEW ACCOUNT
To register a new account, please follow the steps below:

STEP 3A – CONNECT CAMERA TO WI-FI- Connection via Bluetooth
After installing the app and creating an account:

STEP 3B – CONNECT CAMERA TO WI-FI- Connection via QR Code
After installing the app and creating an account:

Factory reset

To restore the camera’s default settings, hold down the Reset button for about 5 seconds until a beep sounds. Then release the button. The camera will restart, restore the default (factory) values, and be ready to be added to the application again.

FAQs

Q: Can I use a memory card larger than 256GB with this camera?
A: No, the camera supports 256GB micro SD cards.

Q: How can I reset the camera?
A: To reset the camera, press and hold the reset button located at the back of the unit for a few seconds until you hear a beep sound.