Elimko E-48P Series Universal Advanced Digital Controllers User Guide

Q: What are the dimensions of the E-48P controller?
- A: The dimensions of the E-48P controller are 48×48 mm.
Q: What is the operating voltage range for the E-48P controller?
- A: The operating voltage range for the E-48P controller is 85-265 V AC / 85-375 V DC.
Q: Can I clean the controller with alcohol or solvents?
- A: No, do not use alcohol or other solvents to clean the controller. Use a clean cloth soaked in water tightly squeezed to gently wipe the outer surface of the controller.

Product Usage Instructions

Installation

The E-48P controller is designed for panel mounting and should be used in an industrial environment. Before installing and operating the controller, please read the user manual thoroughly.
The installation and configuration of the controller must only be performed by a person qualified in instrumentation.

Keep the unit away from flammable gases that could cause an explosion.

Cleaning

Do not use alcohol or other solvents to clean the controller.
Use a clean cloth soaked in water tightly squeezed to gently wipe the outer surface of the controller.

Limitations

The E-48P controller is not to be used in medical applications.

EU Directive Compliance

The E-48P controller complies with the following EU directives:

Low Voltage Directive EN 61010-1
EMC Directive EN 61326-1

DESCRIPTION

E-48P Series universal process controllers are industrial devices at 48×48 mm IEC/TR 60668 dimensions designed using new generation microcontrollers with on/off, PID and other control forms, where inputs and outputs can be easily programmed by0 the user.
In E-48P Series controllers, the set value and measured value can be displayed from -1999 to 9999 on two 4-digit displays; general purpose inputs (T/C, R/T, mV, mA) can be programmed.

DIMENSIONS and PANEL CUT-OUT

CONNECTION DIAGRAM

Warning: Operating voltage suitable for the device type shall be applied.

1st and 2nd control outputs can be selected as either Relay (RL1, RL2) or SSR (SSR1, SSR2).
Only one of analog output (AO1) and RS-485 can be selected.
Analog output (AO1) mA or 0-10 V DC can be selected.

Analog Input

PRECAUTIONS

WARNINGS

E-48P controller is designed for panel mounting and should be used in an industrial environment.

The package of E-48P controller contains; Controller, 2 pieces of mounting clamps, User manual and Guarantee certificate.
After opening the package, please check the contents with the above list. If the delivered product is wrong type, any item is missing or there are visible defects, contact the vendor from which you purchased the product.
Before installing and operating the controller, please read the user manual thoroughly.
The installation and configuration of the controller must only be performed by a person qualified in instrumentation.
Keep the unit away from flamable gases, that could cause explosion.
Do not use alcohol or other solvents to clean the controller. Use a clean cloth soaked in water tightly squeezed to gently wipe the outer surface of the controller.
It is not used in medical applications.

EU DIRECTIVE COMPLIANCE

Low Voltage Directive EN 61010-1

EMC Directive EN 61326-1

TYPE CODING

Only one of the analog output and RS-485 options can be coded. For example, only one of the options (X) and (Y) can be coded as 1.

When E-48P Series controllers are ordered with communication, the E-IB-11 USB-RS485 converter can be used for PC connection. There are various control and monitoring software provided by Elimko.

TECHNICAL SPECIFICATIONS

Parameter	Description
Control Type	On/Off, PID, Heat/Cool, Floating and Feedback Control of Valves
Operating Voltage	20..60 V AC / 20..60 V DC or 85..265 V AC / 85..375 V DC
Relays / SSR	2 pieces SPST – NO 250 V AC 5A relays or 24 V DC 25 mA (SSR) drives
Dimensions (mm)	48 (Lenght) x 48 (Height) x 100 (Width)
Panel Cut-Out (mm)	45 (Lenght) x 45 (Height)
Analog Output	1 x 0..20 / 4..20 mA or 0..10 V DC optional
Analog Input	Universal (Note 1),
Communication (RS-485)	Available (RS-485)
Digital Input	None
Valve Feedback	None
Transmitter Supply	Available
Weight	115 g
Power Consumption	Max. 7 W (10 VA)
Operating Temperature	– 10 °C … 55 °C
Storage Temperature	– 25 °C … 65 °C
Memory	Maks. 100.000 write
Protection Class	IP-65 Front Panel, IP-20 Rear Case

Notes

(1) Universal Input:
- Thermocouple: B, E, J, K, L, N, R, S, T, U
- Resistance Thermometer: Pt-100
- Current: 0-20 mA, 4-20 mA (Linear)
- Voltage: 0-50 mV, 0-1 V, 0.2- 1 V (Linear),
  - 0-10 V DC, must be specified in the order.
- Resolution: 16 bit
- Accuracy: Thermocouple, Max. ±1.0 °C (Conversion and CJC error)
  - Resistance Thermometer, Max. ±0.5 °C
  - (Conversion and wire resistance compensation)
  - Linear Input, Max. % 0.1

PARAMETER TABLE

ACCESSING PARAMETERS

APPLICATION EXAMPLES

Input: Pt-100 Relay / Alarm1: 50 °C Low, Relay2 / Alarm2: 55 °C High AO1: 4-20 mA PID Control Output
Input: TC Type J, Relay1: On-Off Control Output, Relay2 / Alarm2: 350 °C High
Input: TC Type K, Profile Control (Ramp up to 400°C in 10 minutes and wait for 60 minutes), Relay1: PID Control Output, AO1: Retransmission Output (4-20 mA, 0-1200 °C)

Table 1. Input Type Options

(*) Custom specified volt input

Table 2. Control Set Options

Table 3. Alarm Options

Table 4. Control Type Options

Table 5. Relay Output Options

Table 6. Analog Output Options

Table 7.1. Analog Output Range

Table 7.2. Analog Output Range

Scan

For detailed information, you can access the comprehensive user manual of the device under the heading “User Manuals” at www.elimko.com.tr.
You can also use the QR Code on the front for this.

Contact

Elimko Elektronik İmalat ve Kontrol Ticaret Ltd. Şti.

Ankara Sanayi Odası 2. Organize Sanayi Bölgesi Alcı OSB Mahallesi 2001. Cad. No:14 Temelli 06909 Ankara / TURKİYE
Tel: +90 312 212 64 50 (Pbx)
Fax: +90 312 212 41 43

E-mail: elimko@elimko.com.tr
www.elimko.com.tr

Documents / Resources

	Elimko E-48P Series Universal Advanced Digital Controllers [pdf] User Guide E-48P Series, E-48P Series Universal Advanced Digital Controllers, Universal Advanced Digital Controllers, Advanced Digital Controllers, Digital Controllers, Controllers
	Elimko E-48P Series Universal Advanced Digital Controllers [pdf] Owner's Manual E48, 48P, KY-48P-0324-1, E-48P Series Universal Advanced Digital Controllers, E-48P Series, Universal Advanced Digital Controllers, Advanced Digital Controllers, Digital Controllers, Controllers

References

User Manual

Elimko E-48P Series Universal Advanced Digital Controllers

Product Information