FEATUREDdynamic-LOHO

dynamic PF-BU-A-10 profile Biosensors

dynamic-PF-BU-A-10-proFIRE-Biosensors-PRODUCT

Product Description

Order Number: PF-BU-A-10

Table 1. Contents and Storage Information

dynamic-PF-BU-A-10-proFIRE-Biosensors-FIG-1

  • For research use only.
  • This product has a limited shelf life, please see the expiry date on the label.
  • At temperatures lower than 18°C precipitation may occur.

Preparation

Dilute the complete solution 10x Buffer A (50 mL) by mixing it with 450 mL ultrapure water. After dilution, Buffer A is ready for use (50 mM Na2HPO4/NaH2PO4, 150 mM NaCl). The diluted buffer should be stored at 2-8°C.

Contact
Dynamic Biosensors GmbH
Perchtinger Str. 8/10
81379 Munich

Germany
Dynamic Biosensors, Inc.
300 Trade Center, Suite 1400
Woburn, MA 01801

USA
Order Information order@dynamic-biosensors.com
Technical Support support@dynamic-biosensors.com
www.dynamic-biosensors.com
Instruments and chips are engineered and manufactured in Germany.
2024 Dynamic Biosensors GmbH | Dynamic Biosensors, Inc. All rights reserved.

Documents / Resources

dynamic PF-BU-A-10 proFIRE Biosensors [pdf] User Manual
PF-BU-A-10 proFIRE Biosensors, PF-BU-A-10, proFIRE Biosensors, Biosensors

References

Leave a comment

Your email address will not be published. Required fields are marked *