DNAKE EVC-ICC-A5 Intelligent Elevator Control Module User Manual
DNAKE EVC-ICC-A5 Intelligent Elevator Control Module

Feature

The only furnace offering both 2 wires 208/240V models and 3 wires 120 – 240/208V models for a direct installation of accessories.

  • Multi-position installation
  • Sequential operation of electrical elements
  • Approved for line voltage wiring in copper or aluminum
  • Approved for zero clearance and mobile-home installations
  • Separately framed elements allowing quick and easy replacement
  • 20’’ x 20’’ supply air outlet
  • Baked painted cabinet
  • Breakers in front pane

ADVANTAGE SERIES

  • Continuous ventilation selector switch in front panel
  • Low/High power selector switch in front panel
  • LED indicator for heating demand

MODULATING SERIES

  • Semi-conductor modulation on the entire range (0-100%) for increased comfort and quiet operation
  • Control board enabling total command of the unit and easy configuration
  • Compatible with the Smart Duct System®
  • Allows for our Right-Sized System ®, in combination with our Icon heat pump

Dimension

Dimension

ADVANTAGE SERIES

Model # Volts (1 ph*)2 wires¹ Input kW (BTU/hr) Motor HP Air flow² Max cfm³ Max cooling (tons)
SUP10-A240V12 240/208 10 (34 100) 1/2 1200 3
SUP15-A240V12 15 (51 200) 1/2 1200 3
SUP18-A240V12 18 (61 400) 1/2 1200 3
SUP20-A240V12 20 (68 200) 1/2 1200 3
SUP23-A240V12 23 (78 500) 1/2 1200 3
SUP25-A240V12 25 (85 400) 1/2 1200 3
SUP20-A240V20 20 (68 200) 1 2000 5
SUP23-A240V20 23 (78 500) 1 2000 5
SUP25-A240V20 25 (85 400) 1 2000 5
SUP27-A240V20 27 (92 100) 1 2000 5
SUP30-A240V20 30 (102 400) 1 2000 5
  1. ¹ Can be wired with 3 conductors for 120 – 208/240V supply, to allow direct installation of accessories such as humidifiers.
  2. ² Static Pressure at 0.5″ W.C.
  3. ³ CFM adjustable in heating and cooling

3 phases model available, see with your distributor for more information.

MODULATING SERIES

Model # Volts (1 ph) 2 wires¹ Input kW (BTU/hr) Motor HP Traditionnal Ducts² Smart Ducts®
Airflow Max (cfm) Max cooling (tons) Airflow Max (cfm) Max cooling (tons)
SUP10-M240V12 240/208 10 (34 100) 1/2 1400 3.5 1000 2.5
SUP15-M240V12 15 (51 200) 1/2 1400 3.5 1000 2.5
SUP18-M240V12 18 (61 400) 1/2 1400 3.5 1000 2.5
SUP20-M240V12 20 (68 200) 1/2 1400 3.5 1000 2.5
SUP23-M240V12 23 (78 500) 1/2 1400 3.5 1000 2.5
SUP20-M240V20 20 (68 200) 1 2200 5.5 1600 4
SUP23-M240V20 23 (78 500) 1 2200 5.5 1600 4
SUP25-M240V20 25 (85 400) 1 2200 5.5 1600 4
SUP27-M240V20 27 (92 100) 1 2200 5.5 1600 4
SUP30-M240V20 30 (102 400) 1 2200 5.5 1600 4

Can be wired with 3 conductors for 120 – 208/240V supply, to allow direct installation of accessories such as humidifiers.
² Static Pressure at 0.5″ W.C.
Warranty icon

Contact Us

3400, boulevard Industriel
Sherbrooke, Québec
J1L 1V8 Canada

T 1.819.346.8493
TF 1.800.567.2733
F 1.819.822.4227
info@dettson.ca
www.dettson.com

Specifications subject to change without notice.
Logo

 

Documents / Resources

DNAKE EVC-ICC-A5 Intelligent Elevator Control Module [pdf] User Manual
EVC-ICC-A5, Intelligent Elevator Control Module, EVC-ICC-A5 Intelligent Elevator Control Module

References

Leave a comment

Your email address will not be published. Required fields are marked *