displaypros 03 MODify Single Sided Kit
MODify Single Sided Kit 03
INTRODUCTION
MODify™ is a one-of-a-kind Modular Merchandising System that is made up of interchangeable fixtures and accessories that can be easily assembled, disassembled, and rearranged to create a variety of different display configurations. The MODify system incorporates SEG push-fit fabric graphics that enable you to brand, promote and merchandise with ease.
MODify Single Sided Kit 03 features two slatwall panels (right/left) and one center graphic panel. Customize your kit with fixtures such as shelves, waterfalls and hooks, or furniture like tables and risers. The center SEG push-fit graphic panel can be effortlessly replaced at any time, allowing you to keep your display up-to-date and on-trend.
features and benefits:
Base Kit includes:
- Frame, slatwall, shelf and base colors in kit are all the same, your choice of all white, black, or silver
- Heavy-duty aluminum frame, steel base
- Steel, slotted uprights
- Left & right 35”W x 96”H slatwall panels
- Center graphic panel 35”W x 96”H
- Non-rolling base
- Display is easy to assemble and install
- Lifetime hardware warranty against manufacturer defects
Optional Accessories Include:
- Towel bars.
- U bars
- Faceout bars
- Slatwall hooks
- Waterfalls
- Shelves
dimensions:
| Hardware | Shipping |
| Assembled unit:
110”W x 96”H x 20”D 2794mm(w) x 2438.4mm(h) x 520.7mm(d) Approximate Weight: 226 lbs / 102.512 kg |
Packing case(s):
1 Box Shipping dimensions: (72″L x 20″H x 24″D) 1828.8mm(l) x 508mm(h) x 609.6mm(d) Approximate shipping weight: 282 lbs / 127.913 kg |
| additional information: | |
| Graphics | Powder coat color options: Wood laminate color options: |
| Graphic material: Dye-sublimated fabric See graphic templates for graphic sizes.
Refer to related graphic templates for more information Visit: |
MODify Accessories
All Accessories available in white, black, or silver
Slotwall Accessories
- MFY-SLT-HK 4″, 6″, 8″, 10″ & 12″
- MFY-SLT-FC 6″, 8″, 10″ & 12″
- MFY-SLT-WTR-16-7
U-Bar Accessories
- MFY-TWL-FC 6″, 8″ & 10″
- MFY-UBR-FC 6″, 8″ & 10″
Shelf and Hanger Bars
- MFY-36-12-SHELF
- MFY-SLF-36-12-HB
- MFY-SLT-TWL-36-3
- MFY-UBR-36-12
- MFY-DB-36-17
How to Apply & Remove Graphics
Installation and removal of SEG graphics is easy!
Installation: Push the SEG bead into each corner of the frame (1-4) with your thumb, then push the SEG bead into the middle of the run (5-8) and work your way around the perimeter of the frame until all beading is pushed in properly; if necessary, go around the perimeter again to ensure beading is secure in the extrusion profile.
Note: Keep the set up area clean by using a drop cloth, washing hands before set-up or by wearing gloves.
Removal: Use the pull tab located on the graphic and gently pull the graphic from the frame, going around the perimeter.
Graphics Storage & Care
Graphics should be folded with the graphic facing inward and stored in a zip lock /sealable plastic bag. Spot clean by wiping with a damp white cloth. If washing is necessary, use a commercial size front-loading washing machine, gentle cycle with cool water. Line dry flat. Dry cleaning is NOT recommended to prevent shrinkage.
SETUP INSTRUCTIONS
Kit Hardware BOM
| ITEM | COMPONENTS | QTY | DESCRIPTION |
 |
004-883 | 4 | 883MM (34.76in) OF SWC EXTRUSION |
 |
004-2250 | 4 | 2250MM (88.58in) OF SWC EXTRUSION |
 |
005-879 | 28 | 879MM (34.61in) LENGTH OF SLOTWALL EXTRUSION |
 |
005-879 | 2 | 879MM (34.61in) LENGTH OF SLOTWALL EXTRUSION -WITH 27.75MM BOTTOM CUT |
 |
824-512 | 4 | 512MM (20.16IN) SUPPORT LEG |
 |
830-2350 | 2 | 2350MM (92.52in) MIDDLE UPRIGHT |
 |
830-EC | 2 | 7MM SEG PLASTIC END CAP FOR 830 EXTRUSION |
 |
831-2350 | 1 | 2350MM (92.52in) LEFT UPRIGHT |
 |
831-2350 | 1 | 2350MM (92.52in) RIGHT UPRIGHT |
 |
831-EC | 2 | 7MM SEG PLASTIC END CAP FOR 831 EXTRUSION |
 |
835-883-01-01 | 6 | 883MM (34.76in) OF SINGLE SIDED SEG EXTRUSION -WITH CAM LOCKS BOTH ENDS |
 |
MFY-36-17-BASE-PAN | 3 | 36in WIDE X 17.25in DEEP – DROP-IN BASE PAN |
 |
MFY-BOLT-375-16-2.5 | 4 | 3/8-16 x 2.5″L bolt |
 |
MFY-BRKT3 | 6 | WALL BRACKET |
Kit Graphics BOM
| ITEM | COMPONENTS | QTY | DESCRIPTION |
 |
MFY-SS-03-G | 1 | (39.26 w X 96.61 h total size ) 35.26 w X 92.61 h finish size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner (WITH 1/4″ NOTCH LEFT & RIGHT BOTTOM HORIZONTAL SIDE CORNERS) |
Documents / Resources
 |
displaypros 03 MODify Single Sided Kit [pdf] Instruction Manual MFY-SS-K-03, 03 MODify Single Sided Kit, MODify Single Sided Kit, Single Sided Kit, Sided Kit |