The Exhibitors' HandbookDownloadable Resources
Instruction Manual for displaypros models including: MFY-SS-K-03, 03 MODify Single Sided Kit, MODify Single Sided Kit, Single Sided Kit, Sided Kit
MODify Single Sided Kit 03 - Display Pros
MODify Single Sided Kit 03 – Showtastic
Downloadable Resources
File Info : application/pdf, 10 Pages, 8.00MB
DocumentDocumentMODify Single Sided Kit 03 MODifyTM is a one-of-a-kind Modular Merchandising System that is made up of interchangeable fixtures and accessories that can be easily assembled, disassembled, and rearranged to create a variety of different display configurations. The MODify system incorporates SEG push-fit fabric graphics that enable you to brand, promote and merchandise with ease. MODify Single Sided Kit 03 features two slatwall panels (right/left) and one center graphic panel. Customize your kit with fixtures such as shelves, waterfalls and hooks, or furniture like tables and risers. The center SEG push-fit graphic panel can be effortlessly replaced at any time, allowing you to keep your display up-to-date and on-trend. features and benefits: Base Kit includes: - Frame, slatwall, shelf and base colors in kit are all the same, your choice of all white, black, or silver - Heavy-duty aluminum frame, steel base - Steel, slotted uprights - Left & right 35"W x 96"H slatwall panels - Center graphic panel 35"W x 96"H - Non-rolling base - Display is easy to assemble and install - Lifetime hardware warranty against manufacturer defects Optional Accessories Include: - Towel bars. - Faceout bars - Waterfalls - U bars - Slatwall hooks - Shelves dimensions: Hardware Assembled unit: 110"W x 96"H x 20"D 2794mm(w) x 2438.4mm(h) x 520.7mm(d) Approximate Weight: 226 lbs / 102.512 kg Shipping Packing case(s): 1 Box Shipping dimensions: (72"L x 20"H x 24"D) 1828.8mm(l) x 508mm(h) x 609.6mm(d) Approximate shipping weight: 282 lbs / 127.913 kg Graphics Graphic material: Dye-sublimated fabric additional information: Powder coat color options: See graphic templates for graphic sizes. MODify Single Sided Kits should be mounted to a wall or structure for safety and stability. We are continually improving and modifying our product range and reserve the right to vary the specifi cations without prior notice. All dimensions and weights quoted are approximate and we accept no responsibility for variance. E&OE. See Graphic Templates for graphic bleed specifications 6/1/2023 Refer to related graphic templates for more information Visit: https://www.theexhibitorshandbook.com/ downloads/download-graphic-templates or click here Wood laminate color options: MODify Accessories All Accessories available in white, black, or silver Slotwall Accessories MFY-SLT-HK 4", 6", 8", 10" & 12" MFY-SLT-FC 6", 8", 10" & 12" U-Bar Accessories MFY-SLT-WTR-16-7 MFY-TWL-FC 6", 8" & 10" MFY-UBR-FC 6", 8" & 10" Shelf and Hanger Bars MFY-36-12-SHELF MFY-SLF-36-12-HB MFY-SLT-TWL-36-3 MFY-UBR-36-12 MFY-DB-36-17 How to Apply & Remove Graphics Installation and removal of SEG graphics is easy! Installation: Push the SEG bead into each corner of the frame (1-4) with your thumb, then push the SEG bead into the middle of the run (5-8) and work your way around the perimeter of the frame until all beading is pushed in properly; if necessary, go around the perimeter again to ensure beading is secure in the extrusion profile. Note: Keep the set up area clean by using a drop cloth, washing hands before set-up or by wearing gloves. Removal: Use the pull tab located on the graphic and gently pull the graphic from the frame, going around the perimeter. Graphics Storage & Care Graphics should be folded with the graphic facing inward and stored in a zip lock /sealable plastic bag. Spot clean by wiping with a damp white cloth. If washing is necessary, use a commercial size front-loading washing machine, gentle cycle with cool water. Line dry flat. Dry cleaning is NOT recommended to prevent shrinkage. QTY IMAGE DESCRIPTION 4 3/8-16 x 2.5"L bolt 1 2350MM (92.52in) LEFT UPRIGHT 2 2350MM (92.52in) MIDDLE UPRIGHT 1 2350MM (92.52in) RIGHT UPRIGHT 4 2250MM (88.58in) OF SWC EXTRUSION 4 512MM (20.16IN) SUPPORT LEG SWC SWC LEFT UPRIGHT MFY-BOLT-375-16-2.5 MIDDLE UPRIGHT SVC PRE-INSTALLED SWC SWC SETUP INSTRUCTIONS SWC SWC MIDDLE UPRIGHT RIGHT UPRIGHT SVC PRE-INSTALLED SWC SWC STEP 1 BOLT UPRIGHTS TO FEET TOGETHER 1 QTY IMAGE DESCRIPTION 2 883MM (34.76in) OF SWC EXTRUSION 883MM (34.76in) OF SINGLE 3 SIDED SEG EXTRUSION -WITH CAM LOCKS BOTH ENDS 6 WALL BRACKET CROSS BRACE SITS ON SUPPORT LEG 180 6" FROM TOP IMPORTANT! MAKE A HALF TURN TO LOCK EXTRUSIONS WALL MOUNT CLIPS 6" FROM TOP SWC PRE-INSTALLED SLOT WALL TOP CHANNEL SETUP INSTRUCTIONS STEP 5 * LOCK TOP CROSS BRACE AND PLACE END CAPS TO ALIGN WALL BRACKETS (TEMPORARY INSTALLED) *FASTEN CLIPS TO WALL *FASTEN CLIPS TO WALL *FASTEN CLIPS TO WALL STEP 6 SWC PRE-INSTALLED STEP 4 SWC PRE-INSTALLED STEP 3 LOCK CROSS BRACE TO UPRIGHTS STEP 2 LOCK CROSS BRACE TO UPRIGHTS LOCK CROSS BRACE TO UPRIGHTS NOTE: BOTTOM CROSS BRACE SITS ON TOP INSIDE EDGE OF LEFT AND RIGHT SUPPORT LEG Disclaimer: Unit must be permanently secured and fastened to wall or other structure for stability. 2 QTY IMAGE DESCRIPTION 2 883MM (34.76in) OF SINGLE SIDED SEG EXTRUSION -WITH CAM LOCKS BOTH ENDS 14 879MM (34.61in) LENGTH OF SLOTWALL EXTRUSION 1 879MM (34.61in) LENGTH OF SLOTWALL EXTRUSION -WITH 27.75MM BOTTOM CUT 1 883MM (34.76in) OF SWC EXTRUSION 1 7MM SEG PLASTIC END CAP FOR 830 EXTRUSION 1 7MM SEG PLASTIC END CAP FOR 831 EXTRUSION SETUP INSTRUCTIONS LOOSEN END CAP TO ATTACH TOP CROSS BRACE STEP 7 * REMOVE TOP CROSS BRACE AND END CAPS (TEMPORARY INSTALLED) STEP 8 SLOTWALL EXTRUSION STACK 005-879 STEP 9 LOCK CROSS BRACE TO UPRIGHTS AND PLACE END CAPS SLOTWALL 005 SWC PRE-INSTALLED SLOT WALL BOTTOM CHANNEL SWC PRE-INSTALLED SLOTWALL BOTTOM CUT SLOTWALL 3 QTY IMAGE 14 879MM (D3E4S.C6R1IPinTIO) NLENGTH OF 3 36in WIDSLEOX 1T7W.25AinLDLEEEPX-TDRRUOSPI-OINNBASE PAN (39.26 w87X996M.6M1 h (to3t4a.l 6siz1ein) )35L.2E6NwGXT9H2.6O1 hF 1 finish sizSeL, ODyTeW-suAb LpLrinEt XonTREcUliSpsIOe BNloc-kWouITt H 1 Stretch, single sided, sewn with FCE-2 silicone beadin2g7a.r7ou5nMd MperBimOetTeTrO& MpullCtaUbTin bottom 1 right co8rn8e3r M(WMITH (13/44".N7O6TiCnH) LOEFFT &SWRIGCHT BOTTOM HORIZONTAL SIDE CORNERS) EXTRUSION 883MM (34.76in) OF SINGLE 1 SIDED SEG EXTRUSION -WITH CAM LOCKS BOTH ENDS 1 7MM SEG PLASTIC END CAP FOR 831 EXTRUSION 1 7MM SEG PLASTIC END CAP FOR 830 EXTRUSION SWC PRE-INSTALLED SLOT WALL BOTTOM CHANNEL LOOSEN END CAP TO ATTACH TOP CROSS BRACE STEP 11 LOCK CROSS BRACE TO UPRIGHTS AND PLACE END CAPS SETUP INSTRUCTIONS STEP 10 SLOTWALL EXTRUSION STACK 005-879 SWC PRE-INSTALLED SLOTWALL SLOTWALL 005 BOTTOM CUT SLOTWALL 4 QTY IMAGE DESCRIPTION 3 36in WIDE X 17.25in DEEP - DROP-IN BASE PAN (39.26 w X 96.61 h total size ) 35.26 w X 92.61 h finish size, Dye-sub print on Eclipse Blockout 1 Stretch, single sided, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner (WITH 1/4" NOTCH LEFT & RIGHT BOTTOM HORIZONTAL SIDE CORNERS) THEN PRESS ALONG THE PERIMETER EDGE MFY-36-17-BASE-PAN SETUP INSTRUCTIONS STEP 12 INSTALL CENTER GRAPHICS STEP 12 PLACE BASE PAN IN GROOVE(FOOT) 5 Kit Hardware BOM ITEM COMPONENTS QTY 004-883 4 004-2250 4 005-879 28 005-879 2 824-512 4 830-2350 2 830-EC 2 831-2350 1 831-2350 1 831-EC 2 835-883-01-01 6 MFY-36-17-BASE-PAN 3 MFY-BOLT-375-16-2.5 4 MFY-BRKT3 6 DESCRIPTION 883MM (34.76in) OF SWC EXTRUSION 2250MM (88.58in) OF SWC EXTRUSION 879MM (34.61in) LENGTH OF SLOTWALL EXTRUSION 879MM (34.61in) LENGTH OF SLOTWALL EXTRUSION -WITH 27.75MM BOTTOM CUT 512MM (20.16IN) SUPPORT LEG 2350MM (92.52in) MIDDLE UPRIGHT 7MM SEG PLASTIC END CAP FOR 830 EXTRUSION 2350MM (92.52in) LEFT UPRIGHT 2350MM (92.52in) RIGHT UPRIGHT 7MM SEG PLASTIC END CAP FOR 831 EXTRUSION 883MM (34.76in) OF SINGLE SIDED SEG EXTRUSION -WITH CAM LOCKS BOTH ENDS 36in WIDE X 17.25in DEEP - DROP-IN BASE PAN 3/8-16 x 2.5"L bolt WALL BRACKET Kit Graphics BOM ITEM COMPONENTS QTY MFY-SS-03-G 1 DESCRIPTION (39.26 w X 96.61 h total size ) 35.26 w X 92.61 h finish size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner (WITH 1/4" NOTCH LEFT & RIGHT BOTTOM HORIZONTAL SIDE CORNERS)