dahua HDBW3X4X Series Security Camera
The following guide enables you to set up the alarm output and the alarm delay time on (Series 3) and
(Series 5 & 7) camera-only systems.
|
|
DH-IPC-HF/HFW/HDW/HDBW3X4X Series |
HFW3549T1-AS-PV |
DH-IPC-HF/HFW/HDW/HDBW5X4X Series |
HDW5241TM-ASE |
DH-IPC-HF/HFW/HDW/HDBW7X4X Series |
HFW5242H-ZE |
HDBW7442H-Z |
System Version: V2.800.00AD000.0.R
Build Date: 2020-07-29
NB: The firmware version is based on the latest version when this document was created and may slightly differ from future versions, however this will not affect any of the functionality
TiOC HOW TO GUIDE
Setting up the alarm output and the alarm delay time
Step 1: Log in to the camera, go to >
>
.
Note: You can click these icons on the top right hand corner to test, enable or disable the light or alarm output on the live view page.
Step 2: Tick “Enable” to activate the functions and adjust the related settings such as “Recording Delay” or “Alarm Delay”.
Then, click to save your settings.
Step 3: Check the alarm log.
Go to >
and click
, here you can check recordings that have been saved and new settings for the alarm. You can check the alarms by searching “Events” by time period. Click each recording and you will find the type of Smart Motion Detection and more information.
*Design and specifications are subject to change without notice
DAHUA UK & IRELAND
Quantum, 60 Norden Road, Maidenhead, Berkshire SL6 4AY
Tel: +44 (0) 1628 613 500
sales.UK@dahuatech.com
support.UK@dahuatech.com
If you still encounter problems operating your Dahua device, please call +44 (0)1628 613 500 |
Documents / Resources
![]() |
dahua HDBW3X4X Series Security Camera [pdf] User Guide DH-IPC-HF-HFW-HDW, HDBW3X4X Series, HDBW3X4X Series Security Camera, HDBW3X4X Series, Security Camera, Camera |