cudy GS1024E Light Managed Switch
Product Information
Specifications:
- Model: Light Managed Switch
- Plug-and-play installation
- Web management interface for configuration
- LAN and WAN connectivity
- Supports IP address range: 192.168.2.x (x ranges from 2 to 254)
- Subnet mask: 255.255.255.0
Product Usage Instructions
Installation:
The switch is plug-and-play. Follow the diagram provided in the manual to connect it. Note that the product in the diagram may differ from the actual product.
Web Management Login:
- If your switch has a DIP switch, slide it to the Managed position. Otherwise, skip this step.
- Set your PC’s IP address to 192.168.2.x (where x ranges from 2 to 254) and subnet mask to 255.255.255.0.
- Open a web browser on your PC, enter 192.168.2.1 in the address bar, press Enter, and create a password to log in.
FAQ
- Q: Is the switch configuration accessible in multiple languages?
A: Yes, the switch supports configuration interfaces in multiple languages including English, Italiano, Deutsch, Eesti, Norsk, Svenska, Ting Vit, Cestina, Suomi, Lietuvi kalba, Polski,
Slovencina, Magyar. - Q: How can I reach technical support?
A: For technical assistance, visit www.cudy.com or contact support at 810600345 or support@cudy.com.
Connection
The switch is plug-and-play. Follow the diagram to connect it.
Note: The product in the diagram may differ from the actual product.
Login
The switch supports a web management for further configuration.
Follow steps below to log in:
- If your switch has a DIP switch, slide to “Managed”. Otherwise skip this step.
- Set your PC’s IP address to 192.168.2.x (x ranges from 2 to 254) and subnet mask to 255.255.255.0.
- Open a web browser on your PC, enter 192.168.2.1 in the address bar, press Enter, and create a password to log in.
DIP Switch
Some models have a DIP switch.
- Managed: Toggle to enable interface configuration.
- VLAN: Toggle to prevent downstream clients from communicating with each other, enhancing security. Ports affected are printed near the switch.
- Extend: Toggle to extend the transmission distance to 250 meters, capping data speed at 10 Mbps. Ports affected are printed near the switch.
How to reset?
Quickly toggle the switch left to right and back in 2s.
EU declaration of conformity
Cudy hereby declares that this device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2015/863/EU and 2011/65/EU The original EU declaration of conformity may be found at http://www.cudy.com/ce.
WEEE
According to the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU), this product must not be disposed of as normal household waste. Instead, they should be returned to the place of purchase or taken to a public collection point for recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more information, please contact your local authority or the nearest collection point. Improper disposal of this type of waste may result in penalties according to national regulations.
NEED TECH HELP?
Documents / Resources
 |
cudy GS1024E Light Managed Switch [pdf] Installation Guide GS108E, GS1016E, GS1024E, GS1024E Light Managed Switch, GS1024E, Light Managed Switch, Managed Switch, Switch |
