cudy FS1018PS1 Switch, 1 Gbit Uplink
Hardware Connection
Physical Appearance
Front board
Backboard
Specifications
- Model FS1018PS1
- Network Protocol IEEE802.3 / IEEE802.3u / IEEE802.3z
IEEE802.3x/ IEEE802.3ab / IEEE802.3af/at - PoE Standard IEEE802.3at(30W) and IEEE802.3af(15.4w)
- POE Voltage DC48-55V
- Power Pin Power over spare pairs 1/2(+), 3/6 (-)
- AC Input Voltage AC100~240V
- Output 52V~2.3A
- Total Power 120W
- Dimension(LxWxH) 320mmx21 0mmx46mm
- Bandwidth 9.2Gbps (non-blocking)
- MAC Address 2K MAC address table
- Packet Buffer Memory 6.8Mpps
- Forwarding Mode Store-And-Forward
- Working Temperature -20~50° C
- Storage Temperature -40~80° C
- Working humidity Max relative humidity 90%, non-condensing
- Storage humidity Max relative humidity 95%, non-condensing
- Working hight Max 10,000 feet (3,000 meters)
- Storage hight Max 10,000 feet (3,000 meters)
DIP Explanation
LED and Interface Explanation
EU declaration of conformity
Cudy hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC and 2011/65/EU.The original EU declaration of conformity may be found at http://www.cudy.com/
Email: support@cudy.com
www.cudy.com
Documents / Resources
 |
cudy FS1018PS1 Switch, 1 Gbit Uplink [pdf] Installation Guide FS1018PS1 Switch 1 Gbit Uplink, FS1018PS1, Switch 1 Gbit Uplink, 1 Gbit Uplink, Uplink |
