Z-WAGZ offers plug-and-play vehicle light controllers that flash factory lights in selectable patterns, with model-specific modules for compatible trucks and SUVs.
Z-WAGZ is a vehicle lighting controller product line associated with ZZ-2. Its plug-and-play modules flash factory lights in selectable patterns through OBD2, body control module or lighting control module connections.
Browse manuals for installation, vehicle compatibility, pattern selection, DIP switch settings and status LED troubleshooting. Always match the guide to your module, vehicle year and software version, as supported lights and settings vary.
Selected manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Match the module model, vehicle year and software version to the guide. Manuals cover models including ZW-MFD2, ZW-GM, ZW-FRD, ZW-FSD and ZW-GMLCv2.
No. Depending on the module and vehicle, installation may use the OBD2 port, a STAR diagnostic bank, the body control module or the factory lighting control module. Follow the model-specific instructions.
Consult the confirmed-vehicle chart in your module's manual. Vehicle year, trim and factory lighting hardware can affect compatibility and which lights flash.
The supplied manuals direct users to ZZ-2 for technical assistance and list +1 929-220-1212. Have your module model, vehicle details and status LED behavior ready.
On supported modules, Plow Mode slows the flash pattern and disables high- and low-beam flashing. Consult your manual for the required input wiring and activation sequence.