WLJBIDET provides advanced smart bidet toilet seats featuring instant warm water, heated seating, warm air drying, and self-cleaning nozzles for improved bathroom hygiene.
WLJBIDET is a consumer electronics brand specializing in smart bathroom fixtures, specifically electronic bidet toilet seats. The brand offers a range of models compatible with both elongated and round toilet configurations, designed to upgrade standard toilets into modern, hygienic appliances. WLJBIDET products are known for their comprehensive feature sets, which typically include adjustable water pressure and temperature, unlimited warm water wash modes (rear and feminine), heated seats with temperature control, warm air dryers, and LED night lights.
Many of their models feature intuitive controls via side panels or wireless remote controls, allowing users to customize spray position and oscillation. The brand emphasizes ease of installation and eco-friendly operation by reducing reliance on toilet paper. Support and sales appear to be primarily driven through major online marketplaces, where they provide customer service for installation and troubleshooting.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
A blinking blue LED often indicates the water tank was not filled before power was applied. Unplug the unit, turn off the water supply, then turn the water back on and wait 3-5 minutes for the bidet to fill. Once full, plug the unit back in. The light should stop blinking within a minute.
Press and hold the side knob on the unit for 5 seconds until you hear a beep and the screen flashes. Then, press any button on the remote control. You should hear another beep indicating successful pairing.
Low water pressure can be caused by a clogged filter or nozzle. It is recommended to replace the water filter every 3-6 months. You can also lightly brush the nozzle with a toothbrush to remove debris.
While the unit is powered on, long-press the rear cleaning (hip wash) button on the side panel or remote for about 5 seconds until you hear a beep confirmation that the sound has been disabled.