WLJBIDET O7L-Side panel (Elongated)

WLJBIDET Smart Bidet Toilet Seat User Manual

Model: O7L-Side panel (Elongated)

Brand: WLJBIDET

1. Introduction

Thank you for choosing the WLJBIDET Smart Bidet Toilet Seat. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new bidet seat. Please read this manual thoroughly before installation and use, and retain it for future reference.

2. Safety Information

To ensure safe operation and prevent damage, please observe the following precautions:

Ensure the bidet seat is connected to a grounded electrical outlet.
Do not immerse the unit in water or spray water directly onto the electrical components.
Keep the power cord away from heated surfaces.
Do not attempt to disassemble or repair the unit yourself. Contact qualified personnel for service.
Unplug the unit from the power outlet before cleaning or performing any maintenance.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

3. Product Features

The WLJBIDET Smart Bidet Toilet Seat is designed to provide a comfortable and hygienic experience with its advanced features:

Multiple Cleaning Modes: Offers customizable warm water washing from 92℉ to 102℉. Includes posterior wash, feminine wash, child-friendly wash, and one-touch automatic cleaning.
Self-Cleaning Nozzle: The nozzle automatically cleans itself before and after each use for enhanced hygiene.
Adjustable Nozzle Position: Tailor your cleaning experience with adjustable nozzle positions and oscillating wash functionality. The nozzle remembers your last setting.
Heated Toilet Seat: Provides soothing warmth with adjustable, consistently warm temperature settings, eliminating discomfort from cold seats.
Warm Air Drying: Integrated warm air dryer gently dries you after washing, reducing the need for toilet paper. Adjustable drying temperatures ensure maximum comfort.
Soft Close Lid: The toilet lid and seat close silently, preventing slamming and ensuring a quiet environment.
LED Night Light: A soft-glow nightlight makes midnight trips to the bathroom more convenient without harsh overhead lighting.

Multiple Hygiene Cleaning Modes — Illustration of the various cleaning modes: Rear Cleaning, Female Cleaning, Oscillating Cleaning, and Nozzle Self Cleaning, demonstrating the instant heating and constant temperature flushing.

Heated Toilet Seat — Diagram showing the heated toilet seat feature with four adjustable temperature levels: Turn off, 92°F, 98°F, and 104°F. Note that there may be a ±4°F fluctuation.

Warm Air Drying — Visual representation of the warm air drying function with five adjustable levels, from room temperature to Level 4, providing a hands-off drying experience.

Multi-functional Side Panel Operation — Overview of the multi-functional side panel controls, including icons for Spray, Bidet, Oscillate, Auto, Water Temperature, Seat Temperature, Turbo Nightlight, and Drying.

4. Installation Guide

4.1 Before Installation

Before replacing your old toilet seat, please measure your toilet size to ensure compatibility. This model is designed for elongated toilets.

Toilet Size Measurement Guide — Guide illustrating how to measure your toilet for proper fit. For elongated toilets, the length from the bolt holes to the front rim should be approximately 18.5 inches (470mm), with bolt hole spacing between 4.7-7.0 inches (120-180mm). An electrical outlet is required for operation.

4.2 Installation Steps

Follow these steps for proper installation:

Preparation: Turn off the water supply to your toilet and flush to empty the tank. Disconnect the existing water supply line from the toilet tank.
Remove Old Seat: Remove your existing toilet seat.
Install Mounting Plate: Attach the bidet seat mounting plate to the toilet bowl using the provided hardware. Ensure it is securely fastened.
Connect Water Supply: Connect the provided 3-way valve to the toilet's water supply line and the toilet tank. Then, connect the bidet seat's water supply hose (DMT Pipe) to the 3-way valve. Ensure all connections are tight to prevent leaks.
Attach Bidet Seat: Slide the bidet seat onto the installed mounting plate until it clicks into place.
Connect Power: Plug the bidet seat into a grounded electrical outlet.
Restore Water Supply: Slowly turn on the water supply to the toilet.

Installation Step A: Removing Cover — Step A: Illustration of removing the bottom cover of the bidet seat to access mounting points.

Installation Step B: Screwing Mounting Plate — Step B: Demonstrates securing the mounting plate to the toilet bowl using screws.

Installation Step C: Sliding Seat onto Plate — Step C: Shows how to slide the bidet seat onto the pre-installed mounting plate.

Installation Step D: Connecting Pipes — Step D: Detailed view of connecting the Three-Way Valve and DMT Pipe to the toilet's water supply.

Important Installation Note:

Attention: Water Filling and Blinking Light — Important notice regarding the 3-way valve connection and initial water filling. Ensure the water supply valve is open for 3-5 minutes to fill the bidet before plugging it in. Do not operate functions while the blue light is blinking; it will stop within 1 minute.

Ensure that you connect the 3-way valve to the tank by referring to the page diagram and installation video (if available). The installation instructions for the 3-way valve included in the package only apply to certain toilets. When installation is complete, please make sure to open the water supply valve first, wait 3-5 minutes for the water to fill the bidet, then plug it in. Do not operate any functions while the blue light is blinking. The blue light will stop blinking in approximately 1 minute.

5. Operating Instructions

The WLJBIDET Smart Bidet Toilet Seat is operated via a convenient side control panel. Refer to the icons on the panel for specific functions.

5.1 Basic Functions

Rear Wash: Activates the posterior cleaning function.
Feminine Wash: Activates the gentle feminine cleaning function.
Oscillating Wash: Moves the nozzle back and forth for a wider cleaning area.
Nozzle Self-Cleaning: Initiates an automatic cleaning cycle for the nozzle.
Stop: Stops any active washing or drying function.

5.2 Temperature and Position Adjustment

Water Temperature: Adjust the water temperature for washing (92℉ to 102℉).
Seat Temperature: Adjust the heated seat temperature (92℉, 98℉, 104℉, or off).
Air Drying Temperature: Adjust the warm air dryer temperature (multiple levels).
Nozzle Position: Adjust the nozzle's forward or backward position for optimal cleaning.

5.3 Special Features

Child-Friendly Wash: A gentle wash setting suitable for children.
One-Touch Automatic Cleaning: Initiates a pre-programmed cleaning cycle.
Night Light: Activates the soft LED night light for visibility in the dark.

6. Maintenance

Regular maintenance ensures the longevity and hygienic operation of your bidet seat.

6.1 Cleaning the Nozzle

The nozzle performs a self-cleaning cycle automatically. For additional cleaning, you can manually activate the nozzle cleaning function or gently wipe the nozzle with a soft cloth and mild detergent when it is extended.

6.2 General Cleaning

Wipe the exterior of the bidet seat with a soft, damp cloth and a mild, non-abrasive cleaner. Do not use harsh chemicals, abrasive cleaners, or brushes that could scratch the surface. Ensure the unit is unplugged before cleaning.

7. Troubleshooting

If you encounter issues with your bidet seat, refer to the following common troubleshooting steps:

Problem	Possible Cause	Solution
No power/Unit not working	Not plugged in; Power outlet issue; Circuit breaker tripped.	Ensure power cord is securely plugged in. Check the power outlet with another device. Reset the circuit breaker if tripped.
No water spray or weak spray	Water supply valve closed; Filter clogged; Nozzle blocked.	Ensure water supply valve is fully open. Clean the water filter. Clean the nozzle.
Water not warm	Water heater setting too low; Heater malfunction.	Adjust water temperature setting. If issue persists, contact customer support.
Seat not heated	Heated seat setting too low; Sensor issue.	Adjust seat temperature setting. Ensure proper contact with the seat sensor.
Air dryer not working or weak	Air dryer setting too low; Air vent blocked.	Adjust air dryer temperature setting. Check for any obstructions in the air vent.
Leaking	Loose connections; Damaged seals.	Check all water connections and tighten if necessary. If leaks persist, contact customer support.

If the problem persists after attempting these solutions, please contact WLJBIDET customer support for assistance.

8. Specifications

Specification	Detail
Model	O7L-Side panel (Elongated)
Manufacturer	WLJBIDET
Product Dimensions	51.05 x 44.45 x 13.97 cm
Item Weight	5.47 kg
Size	Elongated
Colour	White
Material	Stainless Steel
Shape	Oval
Voltage	120 Volts
Wattage	1300 watts
Operation Mode	Automatic

9. Warranty and Support

For warranty information and customer support, please refer to the documentation included with your product or visit the official WLJBIDET website. Keep your purchase receipt as proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.