Visual Productions makes lighting controllers, touch interfaces and protocol converters for managing architectural lighting, AV installations and live show systems.
Visual Productions develops lighting and audiovisual control equipment for fixed installations and entertainment shows. Its products include CueCore controllers, KioscTouch touchscreens, NetPanel wall interfaces, SpiNode pixel converters and TimeCore timecode devices.
Find user manuals, quick-start guides and installation instructions covering wiring, power, network setup and operation. Always follow the instructions for your specific model.
For further technical help, visit the Visual Productions support forum.
Selected manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Browse this category for model-specific user manuals and quick-start guides. Match the product name and manual revision to your equipment before following setup instructions.
The product manuals direct users to https://forum.visualproductions.nl for technical support. General enquiries can also be sent to info@visualproductions.nl.
Many models offer a built-in web interface accessible through the device's IP address. Supported devices can also be discovered or configured with vManager. Check your model manual for network and power requirements.
No. Reset procedures and default network settings vary by model. Follow the exact product manual; a factory reset may erase stored settings and programming.
Some devices need time to copy changes to flash memory. The SpiNode manual advises waiting at least 10 seconds, while the TimeCore manual advises 30 seconds after a programming change.