UYF Manuals & User Guides
UYF manufactures smart home security solutions, specializing in keyless entry door locks, biometric fingerprint deadbolts, and Wi-Fi gateways for convenient access control.
About UYF manuals on Manuals.plus
UYF is a provider of modern residential security devices, focusing primarily on smart electronic door locks and access management systems. The brand offers a range of keyless entry solutions designed for homes, apartments, and vacation rentals. Their product portfolio includes touchscreen deadbolts, lever locks with fingerprint recognition, and Wi-Fi gateways that bridge local locks to the internet for remote control via smartphone apps.
UYF smart locks typically feature multiple unlocking methods including numeric passcodes, IC cards, physical mechanical keys, and biometric scanning. Designed for DIY installation, these locks often retrofit existing door preparations. The brand emphasizes user-friendly features such as auto-locking, anti-peep password protection, and voice navigation menus to simplify programming and daily use.
UYF manuals
Latest manuals from manuals+ curated for this brand.
UYF M4-BS2-U Keyless Entry Door Lock with Lever User Manual
UYF Smart Door Lock User Manual: Installation, Operation, and Troubleshooting
UYF Door Lock Preparation Guide: Measure and Install with Existing Holes
UYF Smart Door Lock User Manual
UYF manuals from online retailers
UYF Keyless Entry Door Lock with Handle M4-BS2LH-U Instruction Manual
UYF M4-BWFLH-U WiFi Smart Lock Instruction Manual
UYF IC Card for Smart Deadbolt Lock Instruction Manual
UYF M4 Pro WiFi Smart Front Door Lock Set Instruction Manual
UYF G3-TYW Smart Lock Wi-Fi Gateway User Manual
UYF M4 Pro Smart Door Lock Instruction Manual
UYF WiFi Smart Deadbolt Door Lock Set User Manual
UYF support FAQ
Common questions about manuals, registration, and support for this brand.
-
What is the default administrator passcode for UYF smart locks?
The default administrator passcode is typically 123456. You are required to set a new 4 to 9 digit admin code before programming additional features.
-
How do I reset my UYF lock to factory settings?
Remove one battery for 5 seconds and replace it. Then, long-press the reset button for 10 seconds until the keypad lights up and prompts you. Enter the initialization password (usually 000#) to confirm the reset.
-
Why is my UYF lock keypad not responding?
Check that the batteries are fresh and installed with the correct polarity. Also, ensure the IC cable connecting the exterior and interior units is firmly plugged in and was not pinched or damaged during installation.
-
How do I calibrate the battery level after replacement?
If the lock still prompts low battery after replacing them, enter *59# followed by your Administrator Password, then #1# on the keypad to perform power calibration.
-
What do I do if I forget the administrator password?
You will need to perform a factory reset using the physical reset button on the interior assembly. This will erase all passcodes and return the admin code to the default 123456.