Torchbeam specializes in high-quality automotive lighting solutions, including LED and HID headlights, as well as durable aftermarket vehicle suspension components.
Torchbeam is an automotive aftermarket brand founded in 2019 by experienced industry experts. Dedicated to providing safer and brighter components for drivers globally, the brand utilizes advanced technology like laser scanning to ensure product reliability and precise fitment.
While Torchbeam is highly recognized for its extensive automotive lighting catalog—featuring exceptionally bright LED headlight bulbs, specialized HID replacements, and fog lights—its expertise extends firmly into heavy vehicle hardware. The brand also manufactures reliable air conditioning compressors, power steering pumps, brake master cylinders, fuel pumps, and complete suspension kits, offering total solutions for comprehensive vehicle maintenance and enhancement.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
Remove the dust cover and the original halogen bulb. Insert the Torchbeam LED bulb, align the tabs with the assembly slot, and turn it clockwise to secure it. Finally, connect the power line. For models that are hard to reach, it may be easier to plug the LED bulb in before securing it into the slot.
This is typically a decoding issue caused by the vehicle's computer failing to read the correct signal from the lower wattage LED lights. You may need a CanBus decoder. Contact Torchbeam customer support for assistance and to request the appropriate decoder.
Yes, for the best beam pattern and visual effect, it is recommended to keep the LED chips facing the 3 o'clock and 9 o'clock positions. Many Torchbeam LED bulbs allow you to adjust the buckle to achieve this exact alignment, depending on your vehicle's specific headlight housing.
A failure to switch on can be caused by a mismatch between the bulb and your vehicle's ballast, or a simple loose wiring connection. Ensure that the positive and negative ends on the plug are matching. If the issue persists, the bulb's output waveform may be unmatched with the ballast, requiring further troubleshooting.