SENSORWORX manufactures advanced lighting controls, including occupancy sensors, wall switches, and power packs, designed for energy efficiency and ease of installation.
SENSORWORX is a premier manufacturer of lighting control solutions, dedicated to setting the standard for quality and innovation in the industry. Based in Wallingford, Connecticut, the brand was founded by a team of veteran engineers with deep expertise in electronics and building automation. SENSORWORX specializes in occupancy sensors, vacancy sensors, dimming wall switches, and power packs that utilize cutting-edge passive infrared (PIR) and acoustic technologies.
Designed and manufactured in the USA, SENSORWORX products are built from the ground up to offer superior performance, reliability, and simplified installation for contractors. Their solutions help commercial and residential spaces meet modern energy codes while maximizing occupant convenience. Whether for retrofits or new construction, SENSORWORX provides intuitive controls that reduce energy usage without compromising on user experience.
Latest manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
SENSORWORX warrants its products to be free from defects in materials and workmanship for a period of five (5) years from the date of purchase.
Most SENSORWORX sensors allow you to adjust the time delay via the push button. Press and hold the button until the LED flashes rapidly, release, then tap the button 2 times to select the Time Delay function. Follow the blink-back sequence to set your desired time (e.g., 4 taps for the default 10 minutes).
In Occupancy Mode (Auto-On/Auto-Off), lights turn on automatically when motion is detected and turn off after a time delay. In Vacancy Mode (Manual-On/Auto-Off), users must manually press the switch to turn lights on, but they will still turn off automatically when the space is vacant.
If lights remain on, check if the sensor is in a test mode or if there is constant motion/noise in the area (for dual-tech models). Also, verify the wiring primarily if the relay has been wired in parallel with another switch.
Yes, SENSORWORX wall switches and power packs are rated for LED drivers and lamps, as well as electronic/magnetic ballasts and incandescent loads.