Merrytek manufactures intelligent lighting control solutions, specializing in microwave motion sensors, LED drivers, and daylight sensing modules for commercial and industrial use.
Shenzhen Merrytek Technology Co., Ltd. is a diversified manufacturer established in 2011, focused on the innovation and production of smart lighting control components. The company's primary product lines include microwave motion sensors, DALI drivers, 1-10V dimmable drivers, and daylight harvesting sensors designed to improve energy efficiency in modern buildings.
Merrytek products are widely utilized in warehouses, offices, and parking facilities, offering seamless integration with various lighting fixtures. Their sensors often feature adjustable detection areas, hold times, and daylight thresholds via remote control, allowing for precise customization of lighting behavior. The brand is committed to providing reliable, high-performance solutions for the lighting industry.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
To reset the sensor, press the 'Reset' button on the compatible remote control. This reverts all parameters (detection area, hold time, daylight sensor, etc.) to the physical DIP switch settings on the unit.
Permanent illumination can occur if there is continuous movement in the detection area or if the sensor is installed too close to reflective surfaces like metal, glass, or concrete walls, which may cause false triggering.
The 'Test (2s)' button puts the sensor into a factory test mode. In this mode, detection sensitivity is set to 100%, and the hold time is reduced to 2 seconds to allow for quick verification of sensor function. Pressing 'Reset' or any other button exits this mode.
Yes, microwave sensors can detect motion through non-metallic materials such as thin walls, glass, and plastic. However, metal surfaces will reflect the signal and block detection.