Lock Manuals & User Guides

Lock is a provider of residential security hardware, focused primarily on electronic smart locks and digital deadbolts. Their products, such as the 10CD Smart Lock series, are designed to offer convenient keyless access through secure PIN codes, auto-locking features, and touch-panel interfaces. These locks are engineered to fit standard door preparations, making them suitable for DIY home improvement projects.

The brand emphasizes user-friendly security with features like low-voltage warnings, vacation modes to conserve power, and customizable user codes. While often featuring straightforward installation processes requiring only standard tools, Lock products integrate robust mechanisms to ensure durability and safety. The brand caters to homeowners seeking modern, affordable alternatives to traditional mechanical keys.

• How do I restore factory settings on my Lock smart deadbolt?

  To restore factory settings, remove one battery and wait for 10 seconds. Reinstall the battery; once you hear one long beep and one short beep, press the lock button 3 times within 3 seconds. The indicator should illuminate green to confirm the reset.

• What batteries are required for the Lock keypad?

  The device requires 4 AA high-quality Alkaline batteries. Do not use rechargeable or non-alkaline batteries as they may affect performance.

• How do I disable Vacation Mode?

  To disable Vacation Mode, press and hold the Unlock button for more than 3 seconds, then enter your PIN to unlock the door. Vacation mode restricts all buttons until this process is completed.

• What does it mean if the lock beeps and flashes red?

  If the lock emits beeps and flashes red, it may indicate a low battery (4.8V or lower), an incorrect code entry, or a lock error depending on the number of beeps. Check the troubleshooting section of your manual for specific beep codes.

• How do I determine the handing of my door for installation?

  Stand outside the door. If the hinges are on the left, it is a left-handed door. If the hinges are on the right, it is a right-handed door. You must set the entry switch on the interior assembly to 'L' or 'R' accordingly.