Manufacturer of consumer electronics, primarily known for GPS drones, quadcopters, and guitar accessories.
Lamsam is a consumer electronics brand primarily known for its range of recreational drones and quadcopters designed for aerial photography and videography. The company offers a variety of models, such as the L200 Plus Max, GT8, and SG901 MAX EVO, which feature GPS positioning, 4K HD cameras, brushless motors, and intelligent flight modes like obstacle avoidance and follow-me tracking.
These drones cater to both beginners and enthusiasts looking for accessible flight technology. In addition to aerial devices, Lamsam produces musical instrument accessories, specifically prewired guitar electronics and pickup harnesses available on major online marketplaces.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
First, power on the drone and your remote controller. On your smartphone, go to Wi-Fi settings and connect to the drone's unsecure Wi-Fi network (often named starting with the model number or generic ID). Once connected, open the specific companion app (e.g., HFun Pro, RxDrone, or XiL) designated in your user manual to see the camera feed.
Compass calibration is essential before flight. Typically, you activate calibration mode via the controller, then rotate the drone horizontally 360 degrees until the lights flash, followed by rotating it vertically (camera facing down) 360 degrees until the lights turn solid.
If the drone drifts, place it on a flat, level surface and perform a Gyro Calibration using the controller sticks (consult your manual for the specific stick combination, often both sticks to the bottom right or left corner). Ensure you are flying in an area with strong GPS signal for Position Hold mode.
Lamsam products are primarily sold through third-party marketplaces like Amazon and AliExpress. Warranty claims constitute contacting the specific seller from whom the product was purchased via the marketplace messaging system.
For GPS-enabled models, press the Return-to-Home (RTH) button on the controller. The drone will ascend to a safe height and fly back to the coordinate recorded at takeoff. Ensure the drone had a strong GPS lock before you took off for this feature to work accurately.